 Show Posts
|
|
Pages: [1]
|
One normal person, the rest of the posts are just fine |
|
|
|
Did you attempt doing any transactions, then closed the wallet before the transaction was broadcast to the network or got at least one confirmation ? I sent to my address 2 500 000 000, the wallet immediately turned off and did not turn on anymore. I had to remove and reinstall. Before the transaction, made a backup. go in the .sprouts folder (where your wallet.dat file is), and delete the txleveldb folder, and start the wallet, (this will resync and update your wallet balances) no such file https://cdn1.savepice.ru/uploads/2019/8/29/f6ec58ac4c1a8db450ba550b1609c512-full.jpg! to solve your problem you need to rescan the block chain: > cmd.exe > e: (where "e" is the name of the drive) > ...\coin>coin.exe -rescan (where "coin" is the name of the blockchain folder). At the command you proposed (F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe - rescan),standard wallet launch occurs. Reinstalled the wallet twice, nothing helps. After 2 days, I was able to start reindexing the blocks using this command F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe -reindex, but in the middle of the process the wallet shuts down. 100 lines of file debug.log <script src = " https://pastebin.com/embed_js/XHmsYxSN"> </ script>. P/S not soon crypto will go to the masses if you need "such dances with a tambourine" Of 8000+ users, sprouts of a problem, only you have one! To solve all possible problems, follow the instructions: 01. disable antivirus and firewall; 02. backup the wallet.dat file (C:\Users\user\AppData\Roaming\SproutsHF\); 03. download and extract the official wallet https://github.com/sprouts-coin-org/sprouts/releases/download/v0.2.1.0/sprouts-qt_2.1.0.zip; 04. download and extract the official bootstrab https://github.com/sprouts-coin-org/sprouts/releases/download/v0.2.1.0/sproutshf_bootstrap_20190721.zip to the folder C:\Users\user\AppData\Roaming\SproutsHF\; 05. run sprouts-qt_2.1.0.exe and wait until the blocks are fully synchronized; 06. close the wallet and place with the replacement an early copy of the wallet.dat program folder C:\Users\user\AppData\Roaming\SproutsHF\ 07. run sprouts-qt_2.1.0.exe did as you wrote, the result is the same, I put different wallet.dat the result is one. Re-indexing of blocks is interrupted, with the closure of the wallet. https://cdn1.savepice.ru/uploads/2019/9/4/061eab79b165e65ccf131edca54b5745-full.jpghttps://cdn1.savepice.ru/uploads/2019/9/4/c0b677c67ec1e7a9cbb7dea2141402d3-full.jpgIs tired 01. Check the correctness of the set system date and time on the computer; 02. Try to scan your hard drive for bad sectors. 03. Try reinstalling, the operating system or changing the computer. at the same time did the same on another computer, all the same. Some kind of mysticism. 1. What does it mean and is it important (ERROR: mempool transaction missing input)? 2. maybe wallet.dat is to blame Write me a private message in the https://discordapp.com/login. My DiscordTag - DjeckyWinces#2220 analygin#8251 |
|
|
|
Did you attempt doing any transactions, then closed the wallet before the transaction was broadcast to the network or got at least one confirmation ? I sent to my address 2 500 000 000, the wallet immediately turned off and did not turn on anymore. I had to remove and reinstall. Before the transaction, made a backup. go in the .sprouts folder (where your wallet.dat file is), and delete the txleveldb folder, and start the wallet, (this will resync and update your wallet balances) no such file https://cdn1.savepice.ru/uploads/2019/8/29/f6ec58ac4c1a8db450ba550b1609c512-full.jpg! to solve your problem you need to rescan the block chain: > cmd.exe > e: (where "e" is the name of the drive) > ...\coin>coin.exe -rescan (where "coin" is the name of the blockchain folder). At the command you proposed (F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe - rescan),standard wallet launch occurs. Reinstalled the wallet twice, nothing helps. After 2 days, I was able to start reindexing the blocks using this command F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe -reindex, but in the middle of the process the wallet shuts down. 100 lines of file debug.log <script src = " https://pastebin.com/embed_js/XHmsYxSN"> </ script>. P/S not soon crypto will go to the masses if you need "such dances with a tambourine" Of 8000+ users, sprouts of a problem, only you have one! To solve all possible problems, follow the instructions: 01. disable antivirus and firewall; 02. backup the wallet.dat file (C:\Users\user\AppData\Roaming\SproutsHF\); 03. download and extract the official wallet https://github.com/sprouts-coin-org/sprouts/releases/download/v0.2.1.0/sprouts-qt_2.1.0.zip; 04. download and extract the official bootstrab https://github.com/sprouts-coin-org/sprouts/releases/download/v0.2.1.0/sproutshf_bootstrap_20190721.zip to the folder C:\Users\user\AppData\Roaming\SproutsHF\; 05. run sprouts-qt_2.1.0.exe and wait until the blocks are fully synchronized; 06. close the wallet and place with the replacement an early copy of the wallet.dat program folder C:\Users\user\AppData\Roaming\SproutsHF\ 07. run sprouts-qt_2.1.0.exe did as you wrote, the result is the same, I put different wallet.dat the result is one. Re-indexing of blocks is interrupted, with the closure of the wallet. https://cdn1.savepice.ru/uploads/2019/9/4/061eab79b165e65ccf131edca54b5745-full.jpghttps://cdn1.savepice.ru/uploads/2019/9/4/c0b677c67ec1e7a9cbb7dea2141402d3-full.jpgIs tired 01. Check the correctness of the set system date and time on the computer; 02. Try to scan your hard drive for bad sectors. 03. Try reinstalling, the operating system or changing the computer. at the same time did the same on another computer, all the same. Some kind of mysticism. 1. What does it mean and is it important (ERROR: mempool transaction missing input)? 2. maybe wallet.dat is to blame |
|
|
|
Did you attempt doing any transactions, then closed the wallet before the transaction was broadcast to the network or got at least one confirmation ? I sent to my address 2 500 000 000, the wallet immediately turned off and did not turn on anymore. I had to remove and reinstall. Before the transaction, made a backup. go in the .sprouts folder (where your wallet.dat file is), and delete the txleveldb folder, and start the wallet, (this will resync and update your wallet balances) no such file https://cdn1.savepice.ru/uploads/2019/8/29/f6ec58ac4c1a8db450ba550b1609c512-full.jpg! to solve your problem you need to rescan the block chain: > cmd.exe > e: (where "e" is the name of the drive) > ...\coin>coin.exe -rescan (where "coin" is the name of the blockchain folder). At the command you proposed (F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe - rescan),standard wallet launch occurs. Reinstalled the wallet twice, nothing helps. After 2 days, I was able to start reindexing the blocks using this command F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe -reindex, but in the middle of the process the wallet shuts down. 100 lines of file debug.log <script src = " https://pastebin.com/embed_js/XHmsYxSN"> </ script>. P/S not soon crypto will go to the masses if you need "such dances with a tambourine" Of 8000+ users, sprouts of a problem, only you have one! To solve all possible problems, follow the instructions: 01. disable antivirus and firewall; 02. backup the wallet.dat file (C:\Users\user\AppData\Roaming\SproutsHF\); 03. download and extract the official wallet https://github.com/sprouts-coin-org/sprouts/releases/download/v0.2.1.0/sprouts-qt_2.1.0.zip; 04. download and extract the official bootstrab https://github.com/sprouts-coin-org/sprouts/releases/download/v0.2.1.0/sproutshf_bootstrap_20190721.zip to the folder C:\Users\user\AppData\Roaming\SproutsHF\; 05. run sprouts-qt_2.1.0.exe and wait until the blocks are fully synchronized; 06. close the wallet and place with the replacement an early copy of the wallet.dat program folder C:\Users\user\AppData\Roaming\SproutsHF\ 07. run sprouts-qt_2.1.0.exe did as you wrote, the result is the same, I put different wallet.dat the result is one. Re-indexing of blocks is interrupted, with the closure of the wallet. https://cdn1.savepice.ru/uploads/2019/9/4/061eab79b165e65ccf131edca54b5745-full.jpghttps://cdn1.savepice.ru/uploads/2019/9/4/c0b677c67ec1e7a9cbb7dea2141402d3-full.jpgIs tired |
|
|
|
Did you attempt doing any transactions, then closed the wallet before the transaction was broadcast to the network or got at least one confirmation ? I sent to my address 2 500 000 000, the wallet immediately turned off and did not turn on anymore. I had to remove and reinstall. Before the transaction, made a backup. go in the .sprouts folder (where your wallet.dat file is), and delete the txleveldb folder, and start the wallet, (this will resync and update your wallet balances) no such file https://cdn1.savepice.ru/uploads/2019/8/29/f6ec58ac4c1a8db450ba550b1609c512-full.jpg! to solve your problem you need to rescan the block chain: > cmd.exe > e: (where "e" is the name of the drive) > ...\coin>coin.exe -rescan (where "coin" is the name of the blockchain folder). At the command you proposed (F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe - rescan),standard wallet launch occurs. Reinstalled the wallet twice, nothing helps. After 2 days, I was able to start reindexing the blocks using this command F: \ Crypt \ Sprut \ sprouts-qt \ sprouts-qt.exe -reindex, but in the middle of the process the wallet shuts down. 100 lines of file debug.log <script src = " https://pastebin.com/embed_js/XHmsYxSN"> </ script>. P/S not soon crypto will go to the masses if you need "such dances with a tambourine" |
|
|
|
Did you attempt doing any transactions, then closed the wallet before the transaction was broadcast to the network or got at least one confirmation ? I sent to my address 2 500 000 000, the wallet immediately turned off and did not turn on anymore. I had to remove and reinstall. Before the transaction, made a backup. go in the .sprouts folder (where your wallet.dat file is), and delete the txleveldb folder, and start the wallet, (this will resync and update your wallet balances) no such file https://cdn1.savepice.ru/uploads/2019/8/29/f6ec58ac4c1a8db450ba550b1609c512-full.jpg |
|
|
|
Did you attempt doing any transactions, then closed the wallet before the transaction was broadcast to the network or got at least one confirmation ? I sent to my address 2 500 000 000, the wallet immediately turned off and did not turn on anymore. I had to remove and reinstall. Before the transaction, made a backup. |
|
|
|
By the way, can an old wallet be launched? |
|
|
|
wallet.dat is correct, but where did all my coins go? everything was fine on the old wallet. Wallet Photo  фото ру |
|
|
|
the wallet itself turns off, it works for 10 seconds, balance 0
ok try this then: 1.) delete the debug.log 2.) backup the wallet.dat file and move the original one from that folder to another location (to restore later)3.) start the wallet and see if it stays open 4.) if it closes again (copy the new debug.log contents to pastebin and send here) Got it, I'll try, thanks |
|
|
|
|
the wallet itself turns off, it works for 10 seconds, balance 0
|
|
|
|
I looked, but that tells me little. I don’t understand what to look there.
copy / paste the last 100 lines of the debug log here into a code block or use https://pastebin.com/ and paste the whole log Oh yes, maybe this is important, I sent a transaction to 2,500,000,000 and after that everything broke down (transaction history and balance became 0) <iframe src = " https://pastebin.com/embed_iframe/AVZ1umeN" style = "border: none; width: 100%"> </ iframe> <script src = " https://pastebin.com/embed_js/XefNHips"> </ script> |
|
|
|
|
I looked, but that tells me little. I don’t understand what to look there.
|
|
|
|
|
Installed a new wallet sprouts-qt.exe, it has downloaded half the blocks and spontaneously closes. Who can help resolve the issue?
|
|
|
|
|
