 Show Posts
|
|
Pages: [1]
|
Yes, undoubtedly. I supply with some information below: Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
Hello there! Well that is an interesting question. To start with could you supply me with some information in order to help? Which wallet version are you using/ ^^^^^^^ I used bytecoin wallet v1.0.2.358. Either this or the subsequent versions converted a wallet from *.bin format to *.wallet format. Just at that time I forgot the password for this wallet (аnd I strained not enough to recall). And at last it was succeeded to recall now, but the old version of the wallet without connection to a blockchain does not properly work. I cannot make anything with coins)))). I can see a balance only. Latest bytecoin wallet GUI 3.1.1. but it have no Console. So it can't help to do enything by command line. Create wallet from keys function cannot provide creation from keys of old format. The window with keys is shown, but OK button is not aviable. Which OS are you operating on? ^^^^^^^ Windows10 Have you tried to select open wallet with the new software and select the old version to see if it will upload automatically? ^^^^^^^ Yes, I tried to select open wallet with the new software, but new software is not support old *.bin format of bytecoin wallet. In the menu of a choice of already existing wallet my old file is not visible absolutely. Only *.wallet file in the same directory is visible. If you can answer those for us we can do our best to assist you. In Bytecoin Desktop 3.1.1 when you select "Create wallet from keys" there is a button "Load from file", and it supports opening any file type. Could you try that? Yes, as I wrote: "Create wallet from keys" function cannot provide creation from keys of old format. Аfter press a button "Load from file" ...The window with keys is shown, but OK button is not aviable. So I can't press button of the last confirmation and the convertation process is not finished. If it interested - then I choose my old file wallet.bin.keys the window with keys shows some groups of digits only. No one character. I do not know, is it perhaps necessary to add something. The password probably. I can send to you the test wallet .bin and *.bin.keys 2015's sample to try. And I can try to install and start the wallet on Ubuntu if it can help too. We saw your post in Reddit but we will reply here as well. What are the length of his keys you are trying to load there? Is it letters and symbols? Good day! I did not create the file with keys by my side. I have in the old directory three files concerning a wallet: wallet.bin, wallet.bin.address, wallet.bin.keys. So I try to use that keys file that "I was in a set" in case of start of a relevant wallet. To judge that it contains only digits I can only based on the key which is taken away in a window of loading from the file. The wallet loads it, but last OK does not allow to click. What do I do incorrectly? I will repeat. The password works. In case of start of simplewallet.exe the password gives the chance to open a wallet and to check balance for example. But bytecoind.exe is not launched. So my old wallet is not on friendly terms with a relevant blockchain. I have showed your question to the devs and according to them you shouldn't be having any issues in your situation. Would it be possible to take some screenshots of what you are experiencing so I can show them directly? You may upload them to Imgur or a site of your choosing and send them as a private message to our Reddit. Having a visual basis for this would do a lot to help you in this situation. Yes, I answer to my Reddit with screenshot of convertation's problem in the latest wallet Сan you check obtaining the image and my response about 578 characters? We have replied to your post on Reddit. All done. Nothing more is necessary. I found the bytecoin wallet v1.0.8.608 in archives and converted the old file in a new format. It is a pity that to your devs it is so difficult to give operational advice in similar questions. |
|
|
|
Yes, undoubtedly. I supply with some information below: Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
Hello there! Well that is an interesting question. To start with could you supply me with some information in order to help? Which wallet version are you using/ ^^^^^^^ I used bytecoin wallet v1.0.2.358. Either this or the subsequent versions converted a wallet from *.bin format to *.wallet format. Just at that time I forgot the password for this wallet (аnd I strained not enough to recall). And at last it was succeeded to recall now, but the old version of the wallet without connection to a blockchain does not properly work. I cannot make anything with coins)))). I can see a balance only. Latest bytecoin wallet GUI 3.1.1. but it have no Console. So it can't help to do enything by command line. Create wallet from keys function cannot provide creation from keys of old format. The window with keys is shown, but OK button is not aviable. Which OS are you operating on? ^^^^^^^ Windows10 Have you tried to select open wallet with the new software and select the old version to see if it will upload automatically? ^^^^^^^ Yes, I tried to select open wallet with the new software, but new software is not support old *.bin format of bytecoin wallet. In the menu of a choice of already existing wallet my old file is not visible absolutely. Only *.wallet file in the same directory is visible. If you can answer those for us we can do our best to assist you. In Bytecoin Desktop 3.1.1 when you select "Create wallet from keys" there is a button "Load from file", and it supports opening any file type. Could you try that? Yes, as I wrote: "Create wallet from keys" function cannot provide creation from keys of old format. Аfter press a button "Load from file" ...The window with keys is shown, but OK button is not aviable. So I can't press button of the last confirmation and the convertation process is not finished. If it interested - then I choose my old file wallet.bin.keys the window with keys shows some groups of digits only. No one character. I do not know, is it perhaps necessary to add something. The password probably. I can send to you the test wallet .bin and *.bin.keys 2015's sample to try. And I can try to install and start the wallet on Ubuntu if it can help too. We saw your post in Reddit but we will reply here as well. What are the length of his keys you are trying to load there? Is it letters and symbols? Good day! I did not create the file with keys by my side. I have in the old directory three files concerning a wallet: wallet.bin, wallet.bin.address, wallet.bin.keys. So I try to use that keys file that "I was in a set" in case of start of a relevant wallet. To judge that it contains only digits I can only based on the key which is taken away in a window of loading from the file. The wallet loads it, but last OK does not allow to click. What do I do incorrectly? I will repeat. The password works. In case of start of simplewallet.exe the password gives the chance to open a wallet and to check balance for example. But bytecoind.exe is not launched. So my old wallet is not on friendly terms with a relevant blockchain. I have showed your question to the devs and according to them you shouldn't be having any issues in your situation. Would it be possible to take some screenshots of what you are experiencing so I can show them directly? You may upload them to Imgur or a site of your choosing and send them as a private message to our Reddit. Having a visual basis for this would do a lot to help you in this situation. Yes, I answer to my Reddit with screenshot of convertation's problem in the latest wallet Сan you check obtaining the image and my response about 578 characters? |
|
|
|
Yes, undoubtedly. I supply with some information below: Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
Hello there! Well that is an interesting question. To start with could you supply me with some information in order to help? Which wallet version are you using/ ^^^^^^^ I used bytecoin wallet v1.0.2.358. Either this or the subsequent versions converted a wallet from *.bin format to *.wallet format. Just at that time I forgot the password for this wallet (аnd I strained not enough to recall). And at last it was succeeded to recall now, but the old version of the wallet without connection to a blockchain does not properly work. I cannot make anything with coins)))). I can see a balance only. Latest bytecoin wallet GUI 3.1.1. but it have no Console. So it can't help to do enything by command line. Create wallet from keys function cannot provide creation from keys of old format. The window with keys is shown, but OK button is not aviable. Which OS are you operating on? ^^^^^^^ Windows10 Have you tried to select open wallet with the new software and select the old version to see if it will upload automatically? ^^^^^^^ Yes, I tried to select open wallet with the new software, but new software is not support old *.bin format of bytecoin wallet. In the menu of a choice of already existing wallet my old file is not visible absolutely. Only *.wallet file in the same directory is visible. If you can answer those for us we can do our best to assist you. In Bytecoin Desktop 3.1.1 when you select "Create wallet from keys" there is a button "Load from file", and it supports opening any file type. Could you try that? Yes, as I wrote: "Create wallet from keys" function cannot provide creation from keys of old format. Аfter press a button "Load from file" ...The window with keys is shown, but OK button is not aviable. So I can't press button of the last confirmation and the convertation process is not finished. If it interested - then I choose my old file wallet.bin.keys the window with keys shows some groups of digits only. No one character. I do not know, is it perhaps necessary to add something. The password probably. I can send to you the test wallet .bin and *.bin.keys 2015's sample to try. And I can try to install and start the wallet on Ubuntu if it can help too. We saw your post in Reddit but we will reply here as well. What are the length of his keys you are trying to load there? Is it letters and symbols? Good day! I did not create the file with keys by my side. I have in the old directory three files concerning a wallet: wallet.bin, wallet.bin.address, wallet.bin.keys. So I try to use that keys file that "I was in a set" in case of start of a relevant wallet. To judge that it contains only digits I can only based on the key which is taken away in a window of loading from the file. The wallet loads it, but last OK does not allow to click. What do I do incorrectly? I will repeat. The password works. In case of start of simplewallet.exe the password gives the chance to open a wallet and to check balance for example. But bytecoind.exe is not launched. So my old wallet is not on friendly terms with a relevant blockchain. I have showed your question to the devs and according to them you shouldn't be having any issues in your situation. Would it be possible to take some screenshots of what you are experiencing so I can show them directly? You may upload them to Imgur or a site of your choosing and send them as a private message to our Reddit. Having a visual basis for this would do a lot to help you in this situation. Yes, I answer to my Reddit with screenshot of convertation's problem in the latest wallet |
|
|
|
Yes, undoubtedly. I supply with some information below: Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
Hello there! Well that is an interesting question. To start with could you supply me with some information in order to help? Which wallet version are you using/ ^^^^^^^ I used bytecoin wallet v1.0.2.358. Either this or the subsequent versions converted a wallet from *.bin format to *.wallet format. Just at that time I forgot the password for this wallet (аnd I strained not enough to recall). And at last it was succeeded to recall now, but the old version of the wallet without connection to a blockchain does not properly work. I cannot make anything with coins)))). I can see a balance only. Latest bytecoin wallet GUI 3.1.1. but it have no Console. So it can't help to do enything by command line. Create wallet from keys function cannot provide creation from keys of old format. The window with keys is shown, but OK button is not aviable. Which OS are you operating on? ^^^^^^^ Windows10 Have you tried to select open wallet with the new software and select the old version to see if it will upload automatically? ^^^^^^^ Yes, I tried to select open wallet with the new software, but new software is not support old *.bin format of bytecoin wallet. In the menu of a choice of already existing wallet my old file is not visible absolutely. Only *.wallet file in the same directory is visible. If you can answer those for us we can do our best to assist you. In Bytecoin Desktop 3.1.1 when you select "Create wallet from keys" there is a button "Load from file", and it supports opening any file type. Could you try that? Yes, as I wrote: "Create wallet from keys" function cannot provide creation from keys of old format. Аfter press a button "Load from file" ...The window with keys is shown, but OK button is not aviable. So I can't press button of the last confirmation and the convertation process is not finished. If it interested - then I choose my old file wallet.bin.keys the window with keys shows some groups of digits only. No one character. I do not know, is it perhaps necessary to add something. The password probably. I can send to you the test wallet .bin and *.bin.keys 2015's sample to try. And I can try to install and start the wallet on Ubuntu if it can help too. We saw your post in Reddit but we will reply here as well. What are the length of his keys you are trying to load there? Is it letters and symbols? Good day! I did not create the file with keys by my side. I have in the old directory three files concerning a wallet: wallet.bin, wallet.bin.address, wallet.bin.keys. So I try to use that keys file that "I was in a set" in case of start of a relevant wallet. To judge that it contains only digits I can only based on the key which is taken away in a window of loading from the file. The wallet loads it, but last OK does not allow to click. What do I do incorrectly? I will repeat. The password works. In case of start of simplewallet.exe the password gives the chance to open a wallet and to check balance for example. But bytecoind.exe is not launched. So my old wallet is not on friendly terms with a relevant blockchain. |
|
|
|
Yes, undoubtedly. I supply with some information below: Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
Hello there! Well that is an interesting question. To start with could you supply me with some information in order to help? Which wallet version are you using/ ^^^^^^^ I used bytecoin wallet v1.0.2.358. Either this or the subsequent versions converted a wallet from *.bin format to *.wallet format. Just at that time I forgot the password for this wallet (аnd I strained not enough to recall). And at last it was succeeded to recall now, but the old version of the wallet without connection to a blockchain does not properly work. I cannot make anything with coins)))). I can see a balance only. Latest bytecoin wallet GUI 3.1.1. but it have no Console. So it can't help to do enything by command line. Create wallet from keys function cannot provide creation from keys of old format. The window with keys is shown, but OK button is not aviable. Which OS are you operating on? ^^^^^^^ Windows10 Have you tried to select open wallet with the new software and select the old version to see if it will upload automatically? ^^^^^^^ Yes, I tried to select open wallet with the new software, but new software is not support old *.bin format of bytecoin wallet. In the menu of a choice of already existing wallet my old file is not visible absolutely. Only *.wallet file in the same directory is visible. If you can answer those for us we can do our best to assist you. In Bytecoin Desktop 3.1.1 when you select "Create wallet from keys" there is a button "Load from file", and it supports opening any file type. Could you try that? Yes, as I wrote: "Create wallet from keys" function cannot provide creation from keys of old format. Аfter press a button "Load from file" ...The window with keys is shown, but OK button is not aviable. So I can't press button of the last confirmation and the convertation process is not finished. If it interested - then I choose my old file wallet.bin.keys the window with keys shows some groups of digits only. No one character. I do not know, is it perhaps necessary to add something. The password probably. I can send to you the test wallet .bin and *.bin.keys 2015's sample to try. And I can try to install and start the wallet on Ubuntu if it can help too. |
|
|
|
Yes, undoubtedly. I supply with some information below: Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
Hello there! Well that is an interesting question. To start with could you supply me with some information in order to help? Which wallet version are you using/ ^^^^^^^ I used bytecoin wallet v1.0.2.358. Either this or the subsequent versions converted a wallet from *.bin format to *.wallet format. Just at that time I forgot the password for this wallet (аnd I strained not enough to recall). And at last it was succeeded to recall now, but the old version of the wallet without connection to a blockchain does not properly work. I cannot make anything with coins)))). I can see a balance only. Latest bytecoin wallet GUI 3.1.1. but it have no Console. So it can't help to do enything by command line. Create wallet from keys function cannot provide creation from keys of old format. The window with keys is shown, but OK button is not aviable. Which OS are you operating on? ^^^^^^^ Windows10 Have you tried to select open wallet with the new software and select the old version to see if it will upload automatically? ^^^^^^^ Yes, I tried to select open wallet with the new software, but new software is not support old *.bin format of bytecoin wallet. In the menu of a choice of already existing wallet my old file is not visible absolutely. Only *.wallet file in the same directory is visible. If you can answer those for us we can do our best to assist you. |
|
|
|
|
Так в том и печаль, что кошелёк не онлайн, а обычный. С паролем нет проблемы просто формат кошелька старый.
|
|
|
|
|
Доброго дня! Можно тоже спрошу на эту же тему? У меня тоже есть старый кошелек. Тот что еще был с расширением .bin, а не .wallet. Причем пароль у меня есть. Он открывает кошелек в том старом клиенте, который работал с файлами *.bin, но в последнем кошельке, похоже, нет поддержки файлов *.bin. “Create wallet from keys” тоже "не вывозит" из старого ключа. При выборе старого файла с ключом сам ключ появляется в окошке, но не дает выбрать ОК для создания обновленного кошеля. По ссылке #4 уважаемого user0000001 вижу в мануале послесловие «commands are entered into Bytecoin-qt console (Help => Debug = Console tab)». Однако в новом кошельке нет поддержки консоли. Что еще можно сделать?
|
|
|
|
|
Hi there,
I have an old wallet with the *.bin extension (sample of 2015). Prompt please, how it possible to convert to the latest *.wallet format?
Create wallet from keys function does not work with an old format in a new wallet.
|
|
|
|
|
