Latest posts of: romeoz

Show Posts
Pages: [1]

on: February 22, 2014, 02:48:35 AM

Quote from: vjw757 on February 21, 2014, 07:27:41 PM Where is the best place to mine? what are the pros and cons of mine by yourself or in a pool? Im as new as gets gets to mining. 400gh used to be good. They are currently making 36.00 a day. And in six days that is going to drop o 25.00 a day. Hope you didn't pay much. I mine with 410gh and its so low with difficulty.

on: February 20, 2014, 01:17:27 AM

Quote from: bronan on February 17, 2014, 08:31:47 PM I got a problem when i was rearranging the antminers to get better airflow one of the small parts fell off Sadly it looks like it never was soldered firm on the board I have not even touch those at all i was just replacing the ant thats all Can i solder it myself or do i risk damaging some nearby part if i do. I only have a simple small solder tool which i used when i made my own flip flop boards back in the previous century Or do i need to contact bitmain to replace it ? https://www.dropbox.com/sh/0gji2e3esl9wqlr/p4YfvMrtN4 Mine did the same thing. I soldered it back on and everything worked perfect. :-)

on: January 24, 2014, 02:32:14 AM

Yes. Type vi /etc/.... Vi comes on all Linux favors. No need to install.

on: January 23, 2014, 06:03:01 AM

Sorry about that. I clicked on the pics. Change wan. It's working now. These are a lot quiter than expected. Running two machines and can barley hear them even being overclocked

on: January 23, 2014, 12:11:02 AM

How do U change the IP address on the antminer 180gh. Both mine have the same ip setup

on: January 22, 2014, 01:05:32 AM

How loud do these get? I have a 50gh bfl and its pretty loud. I heard some youtube videos but that dosent really do much. I was going to change the fan out with a 19db cool master 100cfm and add a second to the rear sucking the heat out. Since the fans are really quiet this should cut down on the sound. Right?

on: January 20, 2014, 04:08:28 AM

You would need USB inputs for that to work. Im in the same boat. Just ordered two 180gh and currently I have 2 5gh bfl miners on a pi. Just gonna keep those on the pi since these new 180gh has their own gui.

on: January 20, 2014, 03:41:50 AM

Quote from: overide168 on January 20, 2014, 03:37:45 AM Can you point other miners over lan to this to merge in and mine together? The only way is to use the same worker name. They will combine totals on your pool.

on: January 20, 2014, 02:20:51 AM

Quote Is there an easy step by step instruction for overclocking these units to above 200Gh/s? And when I say easy, I mean each step is clearly explained, rather then just saying "SSH into the miner and change the config file..." I am not all too familiar with SSH. Right now I have PuTTY and winscp525, but I don't know any commands or anything so I don't know how to edit files or navigate in it. Any help will be appreciated. Connect putty to the address, via port 22 Once you login do the following commands vi /etc/config/asic-freq Press the letter i to get a prompt Change the required stuff. Then hit escape and ctrl zz. (This will save the file and exit) Restart. If you still can't get it setup team viewer and ill login and you can watch me change if for you.

on: January 20, 2014, 01:37:17 AM

Thanks for the info. I run that fan on my 5gh miner. Really quiet. But it's only 70cfm. I'll be returning those once they come in. Just ordered two more factory fans too put on the back. You are exiting the hot air out the second fan? Wouldn't the hot air just rise if both fans were blowing in? Just curious cause I'm about to do this setup like you have. Also if i overclock both can I run one 1200 watt PSU for both miners.

on: January 19, 2014, 11:54:25 PM

I ordered four noctua 120mm fans. Replace existing fan and put a second on the other end. Would this accommodate over-clocking. Also any recommendations on a PSU to run both machines.

on: January 19, 2014, 11:44:15 PM

.03 is that for running two at 360gh or just one at 180. Thanks

on: January 19, 2014, 11:13:02 PM

I just ordered two of these. Can someone tell me the current BTC fractions they are earning daily for one? Thanks

on: January 19, 2014, 06:44:05 PM

I just bought two Bitmain Antminer S1 180GH/S. I know I need to wire a power supply for it but does anyone have a good recommendation for a 1000watt psu that will run both miners vs getting two separate psu. Also I ordered 4 Noctua 120mm fans to put on each end to help cooling. I'm replacing the factory fan but on the other end would I make it exit or blow towards the cards? Although that seems like a silly questions since all the hot air will rise since it's all open. I guess I answered that questions myself. Unless my thinking is wrong...thanks for the help

Pages: [1]