How do you find a certain gpu? according to the readme.....



Additionally, while the miner is running, you can use the following interactive commands
in the console window by pressing one of these keys:
  s   Print detailed statistics
  1-9 Pause/resume GPU1 ... GPU9 (if you have more than 9 GPUs, type 010 for card 10, 011 for card 11, etc.)
  p   Pause/resume the whole miner

I just press a number and it will stop the gpu from mining? The P command works but I can't get individual gpus to pause so I can find gpu 7

Any help would be appreciated

well I got it to mine in 1709 with 18.3.4 but now the cards are only mining at 17 each vs 30+ with crimson. (compute) is on

2018.06.26:02:07:05.063: main Phoenix Miner 3.0c Windows/msvc - Release
2018.06.26:02:07:05.063: main Cmd line: -pool eu2.ethermine.org:4444 -pool2 us2.ethermine.org:4444 -wal 0xE2d5DeBE9D221b44913f9E0A318f114b22B174e6.Rig1 -proto 3 -amd -tt 65 -tstop 85 -fanmin 40 -fanmax 100 -cvddc 925 -mvddc 925 -gser 1 -cclock 1200 -mclock 2100,2100,2100,2015,2060,2070,2020,2260
2018.06.26:02:07:10.930: main Available GPUs for mining:
2018.06.26:02:07:10.930: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU4: Radeon RX 580 Series (pcie , OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU5: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU6: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU7: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:10.930: main GPU8: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs
2018.06.26:02:07:11.093: main ADL library initialized
2018.06.26:02:07:11.376: main Listening for CDM remote manager at port 3333 in read-only mode
2018.06.26:02:07:11.376: main Eth: the pool list contains 4 pools
2018.06.26:02:07:11.376: main Eth: primary pool: eu2.ethermine.org:4444
2018.06.26:02:07:11.376: main Starting GPU mining
2018.06.26:02:07:11.376: main Matched GPU1 to ADL adapter index 32 (method 1)
2018.06.26:02:07:12.115: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7
2018.06.26:02:07:12.115: main GPU1: using AMD driver ver 18.3.4
2018.06.26:02:07:12.116: main Matched GPU2 to ADL adapter index 0 (method 1)
2018.06.26:02:07:12.605: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7
2018.06.26:02:07:12.607: main GPU2: using AMD driver ver 18.3.4
2018.06.26:02:07:12.607: main Matched GPU3 to ADL adapter index 16 (method 1)
2018.06.26:02:07:13.511: main GPU3: Created ADL monitor for adapter 16; overdrive version: 7
2018.06.26:02:07:13.511: main GPU3: using AMD driver ver 18.3.4
2018.06.26:02:07:13.511: main Matched GPU4 to ADL adapter index 48 (method 1)
2018.06.26:02:07:14.009: main GPU4: Created ADL monitor for adapter 48; overdrive version: 7
2018.06.26:02:07:14.010: main GPU4: using AMD driver ver 18.3.4
2018.06.26:02:07:14.010: main Matched GPU5 to ADL adapter index 112 (method 1)
2018.06.26:02:07:14.492: main GPU5: Created ADL monitor for adapter 112; overdrive version: 7
2018.06.26:02:07:14.492: main GPU5: using AMD driver ver 18.3.4
2018.06.26:02:07:14.492: main Matched GPU6 to ADL adapter index 80 (method 1)
2018.06.26:02:07:14.973: main GPU6: Created ADL monitor for adapter 80; overdrive version: 7
2018.06.26:02:07:14.973: main GPU6: using AMD driver ver 18.3.4
2018.06.26:02:07:14.974: main Matched GPU7 to ADL adapter index 96 (method 1)
2018.06.26:02:07:15.451: main GPU7: Created ADL monitor for adapter 96; overdrive version: 7
2018.06.26:02:07:15.452: main GPU7: using AMD driver ver 18.3.4
2018.06.26:02:07:15.452: main Matched GPU8 to ADL adapter index 64 (method 1)
2018.06.26:02:07:15.929: main GPU8: Created ADL monitor for adapter 64; overdrive version: 7
2018.06.26:02:07:15.929: main GPU8: using AMD driver ver 18.3.4
2018.06.26:02:07:15.930: wdog Starting watchdog thread
2018.06.26:02:07:15.931: main Eth: Connecting to ethash pool eu2.ethermine.org:4444 (proto: QtMiner)
2018.06.26:02:07:15.954: hwmc GPU1: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.958: hwmc GPU1: set VMEM clocks to 2100 MHz (Vddc 925 mV)
2018.06.26:02:07:15.963: hwmc GPU2: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.967: hwmc GPU2: set VMEM clocks to 2100 MHz (Vddc 925 mV)
2018.06.26:02:07:15.973: hwmc GPU3: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.977: hwmc GPU3: set VMEM clocks to 2100 MHz (Vddc 925 mV)
2018.06.26:02:07:15.981: hwmc GPU4: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.985: hwmc GPU4: set VMEM clocks to 2050 MHz (Vddc 925 mV)
2018.06.26:02:07:15.988: hwmc GPU5: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.991: hwmc GPU5: set VMEM clocks to 2060 MHz (Vddc 925 mV)
2018.06.26:02:07:15.995: hwmc GPU6: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:15.998: hwmc GPU6: set VMEM clocks to 2070 MHz (Vddc 925 mV)
2018.06.26:02:07:16.002: hwmc GPU7: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:16.005: hwmc GPU7: set VMEM clocks to 2050 MHz (Vddc 925 mV)
2018.06.26:02:07:16.012: hwmc GPU8: set GPU clocks to 1200 MHz (Vddc 925 mV)
2018.06.26:02:07:16.018: hwmc GPU8: set VMEM clocks to 2250 MHz (Vddc 925 mV)
2018.06.26:02:07:16.148: eths Eth: Connected to ethash pool eu2.ethermine.org:4444 (91.121.167.111)
2018.06.26:02:07:16.149: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_login","params":["0xE2d5DeBE9D221b44913f9E0A318f114b22B174e6.Rig1"]}

2018.06.26:02:07:16.192: main GPU1: 45C 0%, GPU2: 51C 41%, GPU3: 47C 0%, GPU4: 48C 0%, GPU5: 45C 0%, GPU6: 49C 41%, GPU7: 51C 41%, GPU8: 48C 0%
2018.06.26:02:07:16.321: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2018.06.26:02:07:16.321: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

Are we suppose to be using crimson or adrenaline? I have 8 580s and can mine fine with crimson beta but I can't get any version of adrenaline to work. I am on windows 10 1709. I want to be able to use the bat file for overclocking

phoenix just hangs


C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM Example bat file for starting PhoenixMiner.exe to mine ETH

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_FORCE_64BIT_PTR 0

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_MAX_HEAP_SIZE 100

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>setx GPU_SINGLE_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)

C:\Users\Joshua\Desktop\PhoenixMiner_3.0c\PhoenixMiner_3.0c>PhoenixMiner.exe -pool eu2.ethermine.org:4444 -pool2 us2.ethermine.org:4444 -wal 0xE2d5DeBE9D221b44913f9E0A318f114b22B174e6.Rig1 -proto 3 -amd -tt 65 -tstop 85 -fanmin 40 -fanmax 100 -cvddc 925 -mvddc 925 -gser 1 -cclock 1200 -mclock 2100,2100,2100,2015,2060,2070,2020,2260
Phoenix Miner 3.0c Windows/msvc - Release
-----------------------------------------