Show Posts
|
Pages: [1]
|
Hi cryptodredge dev. Please help. I try to change the intensity for Phi2 algo with CryptoDredge 0.9.1 (Windows 10). I set "-i 5", but the miner still use intensity "6" for my GTX1070Ti. Is this a bug? Need your advise. Thank you.
Try "--intensity=5"
|
|
|
I also got 6-6.2 on my 1080Ti's, experiment with -i
huh? the default is six. the maximum is 6. We can set the intensity as high as 8 now. I am running at 7.
|
|
|
It has been 5 hours since you supposedly did a payout to my Coinbase account, but no transactions have shown up. Any idea of why there's such a long delay? Usually, your payments to my account show up in minutes.
|
|
|
Z-ENEMY VER 1.17 (PUBLIC) From: Dk & Enemy (z-enemy)IMPORTANT:For maximum performance make sure you have latest drivers (ver. 398+) http://www.nvidia.com/Download/index.aspx Greetings, fellow miners! We're releasing an updated version of our mining software with some speed inside:- Major performance improvements: 5-10% for X16R & X16S, XDNA (hex), x17, Bitcore(BTX), c11, Sonoa, Renesis, Aergo - Lower end cards like 1050/1060 will see additional few % (yes, a bonus) - The miner no longer depends on memory, it allows to run memory clock at +0 or -500 MHz without performance loss. Happy mining!Windows :Cuda 9.1 x32 : https://mega.nz/#!hbQQyIBD!IAvlCaKdjtZtvYx0IRLdLWoYHJIPHm2HC0yltgytq30Cuda 9.1 x64 : https://mega.nz/#!xeBC1QKa!9xqhC51iMUIZ4cSw_MkZUDfPXeqT5XMFuOvoWPkCLgkCuda 9.2 x32 : https://mega.nz/#!cOZmTI5S!o9jzJeSTAeKxuX7a-MXgUZja_PnuRBubdCWd_pouQRUCuda 9.2 x64 : https://mega.nz/#!caZWnCIK!bNEiavwcSUPnAFev4s4cU1gtzUa5HqiGssaPThPJWy8Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)Сuda 9.0 : https://mega.nz/#!xHQUxAzZ!rLlge4ZPqkaescfUHoZmAGqS_zqjuIty6aOao0Y__54Сuda 9.1 : https://mega.nz/#!ZPZETQBR!OB7TkaPVJB4NBlz_mXM80ToITxjb7Us6158KN8ilqnYCuda 9.2 : https://mega.nz/#!xfI2nawC!Wx_oQbMU3veo_rjUkmNliiaizzGGIGEYbVJboLIL6sQ Love this miner, but can we PLEASE, PLEASE, PLEASE have Lyra2v2 and LyraZ.. Please?
|
|
|
I have found a nice improvement in hashrate for Neoscrypt with 0.8.4. Thanks! Now averaging 2.2 MH/s on my 1080tis.
I set the difficulty at 7. If I set it at 8 I got memory errors on one of my rigs.
do you mean the intensity? Doesn't the original post say intensity ranges from 0 to 6? You can set the intensity as high as 8 now.
|
|
|
I have found a nice improvement in hashrate for Neoscrypt with 0.8.4. Thanks! Now averaging 2.2 MH/s on my 1080tis.
I set the difficulty at 7. If I set it at 8 I got memory errors on one of my rigs.
|
|
|
The newest version, 1-15a 64 bit is SERIOUSLY fast on X16r..!!! Like 31 MH/s fast on a 1080ti ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fmortalc01l.zenfolio.com%2Fimg%2Fs%2Fv-3%2Fp3010989269-5.jpg&t=663&c=sOk_CPx-3DHudQ) What settings do you have for 1080TI? I have only 23-24MH( 100% power, +100 GPU, +150 Mem.
|
|
|
The newest version, 1-15a 64 bit is SERIOUSLY fast on X16r..!!! Like 31 MH/s fast on a 1080ti ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fmortalc01l.zenfolio.com%2Fimg%2Fs%2Fv-3%2Fp3010989269-5.jpg&t=663&c=sOk_CPx-3DHudQ) Do you have an idea of the avg hashrate over the long haul? That might be just one of the easier algos. My average over 2 days settled at 185 MH/s. X16r seems to wander between 170 MH/s and 239 MH/s on my Asus 1080 ti rig (only running 4 cards in each rig right now).
|
|
|
The newest version, 1-15a 64 bit is SERIOUSLY fast on X16r..!!! Like 31 MH/s fast on a 1080ti ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fmortalc01l.zenfolio.com%2Fimg%2Fs%2Fv-3%2Fp3010989269-5.jpg&t=663&c=sOk_CPx-3DHudQ)
|
|
|
WOW!!!!! Phi2 on 0.8.3 is SMOKING fast!!! I'm at 9.8 MH/s per card for my 1080tis ... Holy COW!
how about power consumption? I am at 100% power, +75 GPU and +150 Mem clock. 8 X Nvidia 1080ti cards, Awesomeminer on Windows 10, latest NVIDIA drivers. Cheers.
|
|
|
Can we have Lyra2v2 and Lyra2z please? Thank you.
|
|
|
WOW!!!!! Phi2 on 0.8.3 is SMOKING fast!!! I'm at 9.8 MH/s per card for my 1080tis ... Holy COW!
|
|
|
there are any multialgo like nemosminer that use cryptodredge?
Awesomeminer has CryptoDredge built in.
|
|
|
Download/MirrorOverviewCryptoDredge is a simple in use and highly optimized cryptocurrency mining software. It takes full advantage of modern NVIDIA graphics cards through the use of unique optimization techniques. We have also devoted great attention to stable power consumption. These benefits, along with the very small DevFee, make our product one of the best publicly available miners. Supported algorithms- Allium
- Lyra2REv2
- Lyra2z
- NeoScrypt
- PHI1612
- Phi2
Direct linksOfficial PageOur BitcoinTalk Topic (RUS)Telegram ChannelTelegram GroupEmail:cryptodredge@gmail.comPerformanceSystem Requirements- Windows 7/8.1/10 (64-bit versions)
- NVIDIA GPUs with Compute Capability 5.0 or above (Maxwell and Pascal)
- 2GB of RAM (4GB recommended). Some algorithms such as NeoScrypt require the virtual memory (swap file) with the same size as all of the GPU's memory.
- Visual C++ Redistributable for Visual Studio 2015
- Internet connection
QuickstartThe current version of CryptoDredge is a (portable) console application. Unpack the downloaded archive and edit one of the sample .bat files or provide the necessary command line arguments. Sample Command LineCryptoDredge -a neoscrypt -o stratum+tcp://neoscrypt.mine.zergpool.com:4233 -u WALLET_ADDRESS -p c=GBX Command-Line Arguments-v, --version Print version information -a, --algo Specify algorithm to use allium blake2s lyra2v2 lyra2v2-old (see the Lyra2REv2 Issues item) lyra2z neoscrypt phi phi2 skein skunk -d, --device List of comma-separated device IDs to use for mining. IDs are numbered 0,1...,N - 1 -h, --help Print help information -i, --intensity Mining intensity (0 - 6) -o, --pool URL of mining pool -p, --pass Password/Options for mining pool -u, --user Username for mining pool --log Log output to file --no-color Force color off --no-watchdog Force watchdog off --cpu-priority Set process priority in the range 0 (low) to 5 (high) --api-type API type {ccminer-tcp (TCP) | ccminer-ws (WebSocket) | off} -b, --api-bind IP:port for the miner API, 0 disabledTroubleshootingWatchdogIf you are using a third-party watchdog, you can disable the built-in watchdog by using --no-watchdog option. Lyra2REv2 IssuesIn case if you have issues with the current implementation of Lyra2REv2 (lyra2v2), you might want to try lyra2v2-old. e.g. CryptoDredge -a lyra2v2-old -o stratum+tcp://<POOL> -u <WALLET_ADDRESS>Bug writing guidelines- OS
- GPUs (specific models)
- Driver version
- Overclocking parameters (core, mem, voltage)
- Watchdog, monitoring app
- Screenshot or log
- Pool
- Algo
Bug tracking systemCreate New TicketView Active TicketsFeaturesDevFee is 1% Hello, can the cryptodredge team post the phi2 Performance stats to the chart? I get 7.7 MH/s per 1080ti. +120 GPU, +150 mem, 90% power. Running Windows 10 and Awesomeminer.
|
|
|
Anyone have the Neoscrypt hashrate for 1080 ti?
I am getting 1.85 MH/s per 1080ti. I have 8 cards running at 14.7 MH/s using CryptoDredge. 90% power, 100+ on GPU, 125+ on memory. Running Awesomeminer on Windows 10, latest Nvidia drivers.
|
|
|
Is there a COMPLETE list of all Algos supported? I can't find a definitive list of them all; I looked in the readme file and the help file.
Thanks.
|
|
|
Update!
After testing on Skein, I am getting around 870MH/s per card, running my Nvidia 1080tis, for a total of 6.9GH/s for 8 cards.
|
|
|
The latest version of Awesomeminer added CryptoDredge (i.e it came with the latest update) as one of the mining software packages available to me. I benchmarked my cards again and CryptoDredge had by far the best performance for me on Lyra2rev2, Lyra2z and Neoscrypt.
|
|
|
So far, so good! I am getting around 13-15% better performance using CryptoDredge than CCminer, etc. I am running two rigs with 8 X Nvidia 1080ti cards. 80% power, +150 mem clock, +65 GPU clock and getting a cumulative 615.33 MH/s on Lyra2rev2, so almost exactly 77MH/s per card on Lyra2rev2.
On Lyra2z, I am getting 29MH/s, or 3.625 per card.
On Neoscrypt I am getting 13.74 MH/s, or 1.71 MH/s per card (some cards as high as 1.77 MH/s).
I get about 2 restarts per 24 hours with CryptoDredge and get zero restarts for weeks sometimes with ccminer, so it needs to be a bit more stable.
I am running the latest version of Awesomeminer, which is how I found out about CryptoDredge, because the latest update included Cryptodredge.
Cheers, and thanks for this new tool that is allowing me to make more profits!
|
|
|
|