Show Posts
|
Pages: [1]
|
Don't forget: Block Finder Bonuses of 500,000 HKC are coming at Block 40,000 AND Block 50,000. We're almost at 38,000 now, so get in while you still can: http://hkc.majorminers.comAnd when a Solominer fin Block 40000 ? Regards
|
|
|
Hello ! Even one of the pools on mainpage is not paying out ! Scam ? This pool http://192.210.146.197/MPOS/public/ hold my 189000 coins and not pay them out. HKC DEV Team should delete it from first site. Regards Sorry to hear that. I have removed the pool for now, until the pool owner gives a response. Thank you ! Regards
|
|
|
Hello ! Even one of the pools on mainpage is not paying out ! Scam ? This pool http://192.210.146.197/MPOS/public/ hold my 189000 coins and not pay them out. HKC DEV Team should delete it from first site. Regards
|
|
|
Premine dumped, dev buys 25 sacks of rice and live happily ever after.
blablablablablablabla + insert picture Show us the premine in the block explorer instead. You could end this discussion pretty easy but you choose to not do so. Check the first 2500 Blocks in the Blockexplorer. Regards
|
|
|
Hello !
Anybody can upload the source ? The website is not working.
Seems the traffic limit has reached.
Regards and thanks
|
|
|
Please add PWNYcoin !
Regards
|
|
|
Difficulty @75k ?
|
|
|
Hmm.. Though you are connected to my nodes, there seem to be discrepancies. Most of all, the payout tabs are differing! Your node: GZN3atXvdzzd2na42ueczipVMEn4GA38Ee 0.57086159 GbjNDhWc6pcnZKQUnjJ5jJUPfhpNy7NNT4 0.01943084 GaB5jbEowLqNtTJ9DKTbLK2GfC6KgAPmpE 0.00970755 GcpzphoLCjw9oYk8S2YNBYTQUrvBmXLBRS 2e-8 My nodes: GZN3atXvdzzd2na42ueczipVMEn4GA38Ee 0.55806232 GbjNDhWc6pcnZKQUnjJ5jJUPfhpNy7NNT4 0.01440105 Gf8ECtajSbeQfwweVDQrPvU4aRv4XcfYZq 0.01355024 GaB5jbEowLqNtTJ9DKTbLK2GfC6KgAPmpE 0.00719469 GcprsUXyHEuvCwcZrb8XSzceK2CnKLqsqF 0.00679167 GcpzphoLCjw9oYk8S2YNBYTQUrvBmXLBRS 3e-8 Those lists should be identical! The only thing I can think of is that you used different code base (rav3n instead of forrestv).. :/ Yes i use Rav3n code, now the Blocks comming every Minute. If it is better i can switch to Forrestv. I use my old Thinkpad W520 and i use Rav3n bcs runs best for me. Regards
|
|
|
Yes i set it up ready. Somehow my 25 AntminerU1 make more GOAT's then 400GH/s Avalon on P2Pool.
Will try it in few minutes with 1TH/s on my P2Pool
Regards
Thanks for making the P2Pool network stronger I've been thinking that perhaps some of the P2Pool share variables could still be optimized, notably SHARE_PERIOD and TARGET_LOOKBEHIND, which I must admit I do not fully understand. Even a couple of gigahashes will not produce a steady stream of shares, it seems Checkout here http://easyclient.dnsd.me:22646/static/I pointed 1 TH/s there but can not get any block untill 25 min which is amazing for a difficulty from 25k Regards
|
|
|
I'm still not having any luck. You have rpcallowip listed twice in your conf. delete the 127.0.0.1 line -- and allow: 192.168.1.* That should let anything on your network mine, even the local machine. You can put so many rpcallowip in the config like you wish. 127.0.0.1 only says that the rpc can connect aswell from localhost. Mining Direct to the Wallet with Antminer 180GH/s will not work as the wallet can not send the work fast enough to the miner. Regards @SaltySpiton Saw to late in your Picture that you put rpcallowip=192.168.1.2 which means only exact this ip can connect to your wallet. Thats why i put in the config rpcallowip=192.168.*.* what means all devices in your local network can connect to your Wallet
|
|
|
with 192.168.1.2 being the computer I'm running my wallet off of in server mode. I'm still not having any luck. I do use your pool, but I get something like 25% accepted shares. so I'm trying to switch over to solomining.
Oh, wow.. That's atrocious sorry to hear that. Would you mind checking whether goatcoin.p2p.0x0a.nl resolves to 149.210.168.71 at your end? And yes it does, last time I didn't use the new node, I broke your server The stats are a bit off since I have been trying to solo mine with it, but this is pretty similar to the share count I'm getting with your pool Try to use higher ip for your local wallet computer. Some router block the low ip range 1 to 10, try to use 192.168.1.22 or so and forward the port 12646 in your router to your wallet ip. Regards
|
|
|
Still not having much luck solomining. I've got a spare antminer that I've been trying to solomine goat with, however I just can't get it running. It just refuses to connect.
I am solo mining atm direct to wallet and over p2pool both working. You can try to connect here http//easyclient.dnsd.me:22646 is free of charge atm. On wallet i use this config with 25 AntminerU1 : server=1 daemon=1 listen=1 rpcuser=any rpcpassword=any rpcallowip=192.168.*.* rpcport=12646 port=57421 rpcallowip=127.0.0.1 maxconnections=120 addnode=69.90.132.127 addnode=75.183.191.233 Regards Thanks, my config was slightly different, but it still should have worked. I think my biggest hangup is I'm not sure how to work it since the Antminer has a built in version of CGMiner, and since they are networked through my router, rather than connected to USB Hubs connected to my computer, I'm not entirely sure how to get that working in terms of which IP do I use. Still not having much luck solomining. I've got a spare antminer that I've been trying to solomine goat with, however I just can't get it running. It just refuses to connect.
To troubleshoot solomining, I always like to use netstat to see whether the coin client is listening to the correct ports, and something like netcat to verify that it is not blocked by a firewall or such. Also, verifying the rpcuser & rpcpassword can't hurt. (Which OS are you on?) If that doesn't solve it though - did you try my other P2Pool node yet ? I set it up shortly after the first one seemed to be dying. They're actually both working reasonably well now, though the second has a better valid shares rate. It's 'still' at http://goatcoin.p2p.0x0a.nl:22646 (IP changed, so same address, different node). EasyBTC also set up a P2Pool node which seems to be even better, but I'm not sure whether he's ready for the public yet at http://easyclient.dnsd.me:22646 . I do use your pool, but I get something like 25% accepted shares. so I'm trying to switch over to solomining. Use your local ip where the wallet is on running. eg wallet is on computer with ip 192.168.0.111 then put in your Antminer 192.168.0.111:12646 with your user and pass which you set in the goatcoin.conf. Regards
|
|
|
Still not having much luck solomining. I've got a spare antminer that I've been trying to solomine goat with, however I just can't get it running. It just refuses to connect.
To troubleshoot solomining, I always like to use netstat to see whether the coin client is listening to the correct ports, and something like netcat to verify that it is not blocked by a firewall or such. Also, verifying the rpcuser & rpcpassword can't hurt. (Which OS are you on?) If that doesn't solve it though - did you try my other P2Pool node yet ? I set it up shortly after the first one seemed to be dying. They're actually both working reasonably well now, though the second has a better valid shares rate. It's 'still' at http://goatcoin.p2p.0x0a.nl:22646 (IP changed, so same address, different node). EasyBTC also set up a P2Pool node which seems to be even better, but I'm not sure whether he's ready for the public yet at http://easyclient.dnsd.me:22646 . Yes i set it up ready. Somehow my 25 AntminerU1 make more GOAT's then 400GH/s Avalon on P2Pool. Will try it in few minutes with 1TH/s on my P2Pool Regards
|
|
|
Still not having much luck solomining. I've got a spare antminer that I've been trying to solomine goat with, however I just can't get it running. It just refuses to connect.
I am solo mining atm direct to wallet and over p2pool both working. You can try to connect here http//easyclient.dnsd.me:22646 is free of charge atm. On wallet i use this config with 25 AntminerU1 : server=1 daemon=1 listen=1 rpcuser=any rpcpassword=any rpcallowip=192.168.*.* rpcport=12646 port=57421 rpcallowip=127.0.0.1 maxconnections=120 addnode=69.90.132.127 addnode=75.183.191.233 Regards
|
|
|
Hello !
Can anybody share the P2Pool networks.py for GOAT so i can setup a node ?
Thanks
I've put up a git diff patch at http://goatcoin.p2p.0x0a.nl:22646/static/p2pool.goatcoin.patch (link is also at the bottom of the P2Pool interface). Apply it as follows: git clone https://github.com/forrestv/p2pool p2pool-goat cd p2pool-goat wget http://goatcoin.p2p.0x0a.nl:22646/static/p2pool.goatcoin.patch patch -p1 < p2pool.goatcoin.patch
Thank you ! Will now try and setup a node about 1 TH/s Regards
|
|
|
Hello !
Can anybody share the P2Pool networks.py for GOAT so i can setup a node ?
Thanks
|
|
|
Also 1 TH/s produziert maximum 10 BTC, ich habe hier 1 TH/s und bekomme 8 BTC im monat hin.
Gruss
|
|
|
Hy, ich hab jetzt kein direktes Interesse. Da der Preis für mich nicht interessant ist. Aber nich würde interessieren was die Dinger aktuell in China kosten? Gerne per PM an mich Danke Hallo ! Avalon 230 GH/s 12600 CNY , Antminer 180 GH/s 9500 CNY. Das sind die aktuellen Preise hier in Shenzhen ( Grenzstadt zu Hong Kong ). Gruss
|
|
|
|