|
Anyone who knows how wo setup eth+zil?
The example just shows zil-only pool, no hint how to setup eth one
|
|
|
|
My 1070Ti hash with 31Mh/s with --mt 4.
Disable force P2 state with nvidia inspector, and coreclock at 1900. memclock at 4500, (micron memory) can you share a sample command line for nvidia inspector? Thanks |
|
|
|
reading help: --gpu-ethash-mode:
1 - Create 1 buffer for DAG on GPU if driver allows big enough allocation
2 - Created 2 buffers for DAG on GPU Any explanation?! Does it help for 4GB cards or not :/ Oh, and I need help trying to run SRBMiner on Ergo on rig with 470 4Gb cards it starts and immediately restarts itself /latest HiveOS/, maybe didn't configure properly?! I just entered nanopool as pool, nothing else. Nothing in the log to help  |
|
|
|
Some weeks ago I requested a feature where phoenix stops mining if it cannot find addressed card in config, this is becasue I have a mixed rig and sometimes one card goes missing due to a riser problem or whatever, phoenix starts to apply wrong OC values to GPU's. Since I don't have hope that they even see the request, I made a simple powershell script that counts number of adapters and if you have the desired number of adapters, runs a batch (that runs Phoenixminer in my case) or runs another batch if it can't find the required number of GPUS (of course the batch sends me notifications so I can keep track.) You can use this to either shutdown the system cleanly, or if you want you can run your miner with safe settings that matches all your GPU's. You can find the script here: Powershell script to run batch based on display adapter countYou can place the .cmd file in shell:startup, but since I need admin priv. for AMD mem timings I use task scheduler to run the script at startup with admin privileges. Where is the "devcon" program mentioned there? |
|
|
|
|
can anyone share good settings for 5700xt?
Thanks. First time touching these ... I just can't get how to set all different voltages /core/mem cvdd cvddci mvdd ...
|
|
|
|
|
I can confirm that 1.3 works on Nvidia and nvml is fixed
|
|
|
|
Trying it on 4 1070 rig
Works, but it says that Nvidia SMI is not found thus no temperature control. any idea?
Works in Cuda 10 also
Seems like new Nvidia driver problem, they've probably changed something. I also tested my mod with 1070, but with some older driver like 441.xx and it for sure shows temperature, fan speed and power draw. I have 432.00 ... it says: NVIDIA NVML library not found, temperature monitoring for NVIDIA GPUs disabled.
Maybe I should install your version 444 and try... |
|
|
|
|
GPU order is messed up on 1 rig
Speed reported is in "correct GPU order", but temps are in inverted order
Real values is speed/temp 20/70 20/70 20/70 30/78
on dispay it says speed is:
20 20 20 30
temp is
78 70 70 70
Any way to reorder the readings?
|
|
|
|
|
Trying it on 4 1070 rig
Works, but it says that Nvidia SMI is not found thus no temperature control. any idea?
Works in Cuda 10 also
|
|
|
|
|
Can someone explain how the "-powlim" parameter is working?
If I have card with 100W TDP, what will these lines do:
-powlim 10 ==> make tdp 110w ?
-powlim -20 ==> decrease to 80w ?
What if I stop the miner, start it again.
Will the powlim accumulate (100 -> 80 -> 64) or when stoppping miner it resets power limits? (100 -> 80 -> 100 -> 80)
|
|
|
|
i confirm:
9 * RX580 NITRO + SE / 8GB straps || 1H10 TEST
PheonixMiner: 303MHS / 247 SHARES
TeamRedMiner: 297MHS / 299 SHARES
yes is even more with the claymore straps in memory;) straps + TRM = currently
But still a lot of work, I can't wait to see the evolution
Shares are not everything. There is also share difficulty and the total share*diff is what counts My small comparison - mining etc with 470 rig 4g  left side P5.4c right TRM latest, pool Hiveos, average is 2-3% higher on P5.4c |
|
|
|
To answer myself - it seems --prog_config=A480 is enough The weird thing, 470 Nitro 4G makes 12MH and the monitor is on that card. XFX 470 4G makes 9mh ... same settings, no monitor connected...I just don't get why Both cards were "striped", on ether their speed is almost same, Nitro is 0.5mh faster |
|
|
|
|
Can someone give an example of good config for Kawpow and RX470/570 cards?
|
|
|
|
Thank you for the amazing bug report! This is exactly how it is done  The problem is here: Unknown OpenCL driver version! Hashrate and stale shares may suffer - this means that the miner can't recognize the driver and is forced to use the generic kernels, which doesn't support most DAG configs. The quick fix is to upgrade to driver 20.10-1048554 or downgrade to driver 19.50-967956. We suspect that you are using driver 19.50-1011208, which is not supported because somehow it "fell through the cracks" and was never even tested. We will add support for it in the 5.4c for sure. thanks! updated to 20.30/latest from HiveOS/ it works again  |
|
|
|
is there a fix for Allocating buffers failed with: clCreateBuffer (-61). ? We only see this error with Hawaii cards (R9 290/390). If you have other (newer) cards and still see the problem, please let us know the PhoenixMiner version, the AMD driver version, and the exact type of the cards. Also at least part of the log file will be helpful, including the error and one-two screens before that. HiveOS latest build 181 10-12-2020, AMD drivers 19.50 Rig of 4 Radeons, first one 580 8GB (with display interface), others 470 4GB  command line - used "even" -daglim 1 -eres 0 -rvram -1 -rmode 0 It started on 2nd december (epoch 379?) and here in the forum were other complaints from Polaris users. log: 2020.12.12:15:43:47.097: main Phoenix Miner 5.3b Linux/gcc - Release build
2020.12.12:15:43:47.097: main Cmd line: -epool ru-eth.hiveon.net:4444 -ewal 0xe9.RX470 -epsw x -coin eth -cclock 1040 -cvddc 970 -mclock 1950 -tt 74 -daglim 0 -rmode 0 -wd 0 -eres 0 -rvram -1
2020.12.12:15:43:47.100: main Unable to enum CUDA GPUs: no CUDA-capable device is detected
2020.12.12:15:43:47.279: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2020.12.12:15:43:47.279: main OpenCL platform: OpenCL 2.1 AMD-APP (3004.6)
2020.12.12:15:43:47.279: main Available GPUs for mining:
2020.12.12:15:43:47.279: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 1.2, 8 GB VRAM, 36 CUs
2020.12.12:15:43:47.279: main GPU2: AMD Radeon (TM) RX 470 Graphics (pcie 2), OpenCL 1.2, 4 GB VRAM, 32 CUs
2020.12.12:15:43:47.279: main GPU3: AMD Radeon (TM) RX 470 Graphics (pcie 4), OpenCL 1.2, 4 GB VRAM, 32 CUs
2020.12.12:15:43:47.279: main GPU4: Radeon RX 570 Series (pcie 5), OpenCL 1.2, 4 GB VRAM, 32 CUs
2020.12.12:15:43:47.280: main AMD sysfs monitor initialized
2020.12.12:15:43:47.280: main Eth: Loading pools from epools.txt
2020.12.12:15:43:47.280: main Eth: the pool list contains 5 pools (1 from command-line)
2020.12.12:15:43:47.280: main Eth: primary pool: ru-eth.hiveon.net:4444
2020.12.12:15:43:47.280: main Starting GPU mining
2020.12.12:15:43:47.280: main GPU1: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.280: main GPU2: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.280: main GPU3: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.280: main GPU4: fan PWM control mode 2, min 0, max 255
2020.12.12:15:43:47.330: hwmc GPU1: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.331: hwmc GPU2: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.331: hwmc GPU3: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.331: hwmc GPU4: set auto fan: 74C target temp (min fan 0, max fan 100)
2020.12.12:15:43:47.381: main Eth: Connecting to ethash pool ru-eth.hiveon.net:4444 (proto: EthProxy)
2020.12.12:15:43:47.382: main GPU1: 49C 21% 37W, GPU2: 27C 20% 19W, GPU3: 25C 24% 13W, GPU4: 29C 34% 36W
GPUs power: 105.6 W
2020.12.12:15:43:47.482: eths Eth: Connected to ethash pool ru-eth.hiveon.net:4444 (185.22.235.97)
2020.12.12:15:43:47.482: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0xe9.RX470","x"]}
2020.12.12:15:43:47.553: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2020.12.12:15:43:47.553: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
...
2020.12.12:15:43:47.629: GPU1 GPU1: Starting up... (0)
2020.12.12:15:43:47.630: GPU1 GPU1: Generating ethash light cache for epoch #381
2020.12.12:15:43:47.630: GPU2 GPU2: Starting up... (0)
2020.12.12:15:43:47.630: GPU3 GPU3: Starting up... (0)
2020.12.12:15:43:47.630: GPU4 GPU4: Starting up... (0)
2020.12.12:15:43:49.078: eths Eth: Received:
2020.12.12:15:43:49.078: eths Eth: New job #ae9927c8 from diff: 5000MH
2020.12.12:15:43:51.029: GPU1 Light cache generated in 3.4 s (18.7 MB/s)
2020.12.12:15:43:51.164: GPU1 GPU1: Free VRAM: 7.960 GB; used: 0.019 GB
2020.12.12:15:43:51.172: GPU1 GPU1: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.173: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.12:15:43:51.173: GPU1 Fatal error detected. Restarting.
2020.12.12:15:43:51.300: GPU2 GPU2: Free VRAM: 3.968 GB; used: 0.019 GB
2020.12.12:15:43:51.308: GPU2 GPU2: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.308: GPU2 GPU2: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.12:15:43:51.435: GPU3 GPU3: Free VRAM: 3.968 GB; used: 0.019 GB
2020.12.12:15:43:51.438: GPU3 GPU3: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.439: GPU3 GPU3: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.12:15:43:51.582: GPU4 GPU4: Free VRAM: 3.968 GB; used: 0.019 GB
2020.12.12:15:43:51.582: GPU4 GPU4: Allocating DAG for epoch #381 (3.98) GB
2020.12.12:15:43:51.582: GPU4 GPU4: Allocating buffers failed with: clCreateBuffer (-61). |
|
|
|
is there a fix for Allocating buffers failed with: clCreateBuffer (-61). ? |
|
|
|
RX 570/580 with 4Gb still can mining ethereum with 28-30Mhz on HiveOS ?
My rig stopped mining since age 379 (2nd December), main card in with 8GB, but the OS will just reboot right after miner start |
|
|
|
2020.12.05:01:46:32.191: GPU1 GPU1: Allocating DAG for epoch #379 (3.93) GB
2020.12.05:01:46:32.191: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.05:01:46:32.191: wdog Fatal error detected. Restarting.
Can anyone help me please?
Its like that since 2nd December... many people write here, but no one gave solution Latest Hive OS with me, rig of 4 radeons - 8gb main one, 4gb the rest. |
|
|
|
for me the teamredminer has the same speed with rx570s samsung memory
10x man, switched to Teamred... and my 4gb cards run again |
|
|
|
|
Can someone explain how to automatically apply desired overclocking on reboot?
So far I have to put all these settings in the miner config, overclocking via HiveOS interface does not stick between reboots
|
|
|
|
|
Show Posts
