Latest posts of: Gerronimo

Show Posts
Pages: [1]

on: February 19, 2014, 06:41:52 PM

Help. Нужен роутер WR703n или прошивка для MR3020. на последний не хочет ставиться прошивки Xianfu.

on: February 08, 2014, 05:24:08 PM

Need OpenWRT firmware for TP-link MR3020. with installed cgminer for avalon. I found only cgminer for HEX16 Can anyone help? MR3020 is WR703N with case and thats all - but firmware is incompatible

on: January 29, 2014, 06:34:36 PM

This is deja vu - isn't it? And these processes somehow survive after reboot!

on: January 29, 2014, 06:06:50 PM

Quote from: ionutrai on January 29, 2014, 02:42:42 PM I am using an Avalon 2nd Gen and in the admin panel, when I try to save cgminer settings it remains in loading mode... What is wrong? Network - Diagnostics - check network Status - Processes - check "cgminer" process it should be long - cgminer --avalon-options 115200:24:10:41:300 -q -#poolname# ... Also I have traced the cgminer boot process: it starts with {S99cgminer} /bin/sh /etc/rc.common /etc/rc.d/S99cgminer boot then {cgminer} /bin/sh /etc/rc.common /etc/init.d/cgminer start and {cgminer-monitor} /bin/sh /usr/bin/cgminer-monitor

on: January 28, 2014, 06:09:38 PM

OK. 1. The network: Using router ZTE 660 or mobile phone WiFi (less firewall - better works) Lan 5 cat - static address. I tried it many times - used only Lan, then only WiFi. It works only, if I reflash or load defaults - only this time, after pushing "apply settings" - the process "cgminer" is vanished and "connection refused" 2. Startup tab: cgminer process: I push stop, wait 10 sec, push start - go to process tab, see nothing There are all the screens: https://drive.google.com/folderview?id=0B0-eMVr6x9_0UXk0Z0h1VlZwM28&usp=sharing

on: January 27, 2014, 06:09:12 PM

Help me. I have some Avalon 230Ghs - I dont know the number of batch What Tp-link do I have? How can I find proper firmware. Please, the "connection refused" - is constant problem. I use that instruction: Quote Setup your laptop IP address 192.168.0.101 Open http://192.168.0.100 Make sure WR703N can access Internet, Configure WiFi: Network -> WIFI -> Scan(select your WIFI network) -> Join Network -> WPA passphrase -> Submit -> Save & Apply for connect to WIFI Internet setup your mining worker: Status -> Cgminer Configuration. Stop then Start the cgminer service (Restart not working. it's a known bug): System -> Startup, Check your avalon status: Status -> Cgminer Status But I connects only to with default pool settings (donating) stratum+tcp://stratum.ozco.in:80 But it doesnt mine.

on: January 26, 2014, 10:05:24 AM

Hi everybody. Have bought used Avalon 55nm 230Ghs. During 3 days where 4 delays in mining - had several delays for about 3 hours. As I am advanced user in network I started fresh and loaded defaults. But I have "Connection refused" - and it doesn't work at all. firmware - 20131229 firewall - all allow router - ZTE and android smartphone Pools - btcguild Started and stopped Cgminer process billon of times! Any help. Also I use computer USB connection and CGMiner But I have no hashes at all.

on: January 26, 2014, 08:23:31 AM

Have the same problem: Avalon 55nm 230Ghs TP-link 703N 0 hash at all. network is OK Tried both OpenWrt and direct USB (cgminer). LED: Done - constantly lit 1 led - blink Tried everything - all firmware of Tplink, several Wifi routers (messed up with Connection refused). cgminer shows Avalon: Reset failed! not an Avalon? (0: 00 b6 b2 10) get avalon read got err 0

Pages: [1]