Show Posts
|
Pages: [1]
|
I tested it 3 months ago and yes, I've had a positive experience with OneMiners too! I actually discovered them at a conference, and they've been great for my mining operations. The rate of 0.065 USD per kWh is quite competitive, but I'm also curious if anyone has found anything cheaper. If anyone has tips or other recommendations, feel free to share. Thanks for starting this discussion!
|
|
|
The easiest how to provide source of funds is it provide document of loan. Does not matter that you spent that loan for something else. Just take quick loan for 40K USD that you can repay anytime and you can provide these documents. Nobody can see that you have already payed back the loan
|
|
|
Hmm. Is Zeitcoin death ? What do I hear ?
|
|
|
How many computers can I have mining to one bitcoin address?
|
|
|
- thread-concurrency: Without this set correctly, you will get many hardware errors, and a very low hashrate. Now I have zero HW errors with these settings, and a negligible number of rejects.
Set it lower than you would for scrypt mining. I was able to gain over 100 kh/s on the 290x cards by lowering the clock speed from 1030 to 935. As long as you have 4GB of RAM, you should be able to get the maximum possible hashrate. I have no trouble running three-card 7950 and 7970 rigs with only 4GB of RAM, while also maxing out the CPU for XPM mining.
I'm running vertminer 0.5.4pre2, on Ubuntu 12.04 LTS.
Here are my settings, separated by type of card: 7950, at 283 kh/s:"intensity" : "21", "vectors" : "1", "worksize" : "256", "kernel" : "scrypt", "lookup-gap" : "2", "thread-concurrency" : "19712", "shaders" : "0", "gpu-engine" : "990", "gpu-fan" : "5-85", "gpu-memclock" : "1250", "gpu-powertune" : "10", "gpu-vddc" : "1.075", "temp-cutoff" : "95", "temp-overheat" : "90", "temp-target" : "75", "gpu-threads" : "1", "nscrypt" : true, 7970, at 367 kh/s:NB - This card needs to be run with 2 threads for optimum performance, and the intensity has to be 13."intensity" : "13", "vectors" : "1", "worksize" : "256", "kernel" : "scrypt", "lookup-gap" : "2", "thread-concurrency" : "8192", "shaders" : "0", "gpu-engine" : "1021", "gpu-fan" : "5-85", "gpu-memclock" : "1500", "gpu-memdiff" : "0", "gpu-powertune" : "20", "gpu-vddc" : "1.081", "temp-cutoff" : "95", "temp-overheat" : "85", "temp-target" : "75", "auto-fan" : true, "expiry" : "120", "gpu-threads" : "2", "nscrypt" : true, R9 290x, at 456 kh/s:NB - For this card, it's crucial to keep the temperature below 92º, because above that temp, the engine clock speed will start to drop. Don't forget to set powertune to 25, not 20!"intensity" : "21", "vectors" : "1", "worksize" : "512", "kernel" : "scrypt", "lookup-gap" : "2", "thread-concurrency" : "27000", "shaders" : "0", "gpu-engine" : "935", "gpu-fan" : "5-85", "gpu-memclock" : "1350", "gpu-memdiff" : "0", "gpu-powertune" : "25", "gpu-vddc" : "0.000", "temp-cutoff" : "100", "temp-overheat" : "97", "temp-target" : "85", "auto-fan" : true, "gpu-threads" : "1", "nscrypt" : true, THANK YOU THANK YOU.. Your config solved problem with hd 7970 having only 280Khs. Lot of people have same problem. The reason is that you need to set gpu-engine to lower frequency as you are used to from regular scrypt. Thank you:)[/list][/list]
|
|
|
Ready to test on (10x) 7970, (10x) 280X, (10x) 270X and (2x) 290X.
|
|
|
People how to mint. I have mint option inactive -- in gray color. Both Mint Lock and Mint Unlock. I updated wallet and I am really sorry for my 11M Zeits not mining. THx, for help
Did you encrypt your wallet (put a password on it)? If not, there's nothing to 'unlock' as you didn't 'lock' it in the first place. How long have you had coins in your wallet since your last send? From first week of mining. I already minted something but only after I sent half of them to cryptsy and than back to my wallet.
|
|
|
People how to mint. I have mint option inactive -- in gray color. Both Mint Lock and Mint Unlock. I updated wallet and I am really sorry for my 11M Zeits (from first week of mining) not mining. THx, for help
|
|
|
Please, please pull your sell orders at least to 0.00000020 from all exchanges!! You will understand what I mean 10 days later..
please dont add any zeit in any exchange for a year you will understand what I mean 365 days later "pos" or 20%/80% or so Do you thing that it will influence actual price or speed up price growing in Zeitcoin?
|
|
|
I would appreciate If you add Zeitcoin. It would boosted the hashrate and profitability.
|
|
|
Looks very promising. If you watch beginnings of auroracion, this coin has 5x better liquidity in the same days after launching .
|
|
|
|