 Show Posts
|
|
Pages: [1]
|
My bitcoin balance has just gone to zero on ghash, but there's no sign of any withdrawal! (It's nowhere near the auo payout threshold as well)
Has this happened to anyone else?
I have the same problem, today morning I received this from cex.io. Thank you for updating us on this matter. Auto Payout was triggered, and got stuck because of an error, which we are still investigating. Please check back later today to check if the problem is resolved. We also have an ongoing issue with the transaction history logs not presenting properly, this will be resolved ASAP. https://support.cex.io/hc/en-us/articles/202931483-30-Jul-2014-Missing-records-in-balanceWe apologise for the inconvenience this has caused, and thank you for your patience. Best Regards, Daniel CEX.IO Support |
|
|
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. |
|
|
|
|
Batch 1 only
Shipped 0
Waiting 2 - 20140630 , 20140701
|
|
|
|
... a few hours' delay in sending coins to user's wallet in a few more hours = 1 day, something is not right, time to move to another pool  |
|
|
|
Yeah .. I'm saying if you are good at math you wont buy one.
Oh ok  you right. I'm not that good at math , but I wont buy one for this price, BTC0.6 for S1 maybe .. Or english.... mwahahaa No I'm not, I don't speak English  I'm from Chicago .....mwahahaa |
|
|
|
Yeah .. I'm saying if you are good at math you wont buy one.
Oh ok you right. I'm not that good at math , but I wont buy one for this price, BTC0.6 for S1 maybe .. |
|
|
|
No one is being forced to buy. Those that are good at math will sit on the fence.
Good in math for 0.885 ? price is way to high, with this price ROI = 3 months maybe more depends how much you pay for electricity, bitcoin price and difficulty, after that you will be making what ? $1/day --> http://www.vnbitcoin.org/bitcoincalculator.php |
|
|
|
Not sure if this is the right place.
Bought 2x S1's yesterday. I received an invoice via email but no confirmation of payment. Blockchain confirms payment. Bitmain's site confirms payment. But no email.
Have other people experienced this? i.e. is this normal or should I be worried?
How long has it been taking from purchase to being shipped ?
hi, it is normal for bitmain, they stop shipping next day air, regular ups, I think 5 business days. |
|
|
|
Anyone else NOT been able to access bitmain's website? I check it every couple of days to see if anything is in stock again, but getting nothing today.  Yep, down. They were up and selling early today. If you go to 112bit they have listed over 2800 in stock for $404 USD, I would pay with BTC but I use Coinbase not Bitpay. Dang, I need one more. I ordered earlier today, hope it doesn't get messed up... Ditto. I payed in full but didn't recieve a confirmation email. BTC is gone from the address I sent to. They do not send confirmation e mails, only when order are shipped, I paid them Monday hopefully website will be up again tonight. |
|
|
|
Hello I need advise, I setup today 2nd miner from bitmain and on the miner status it is only 155GH/s , ASIC status oooooooo oooooooo oooooooo oooooooo xxxxxxxx oooooooo oooooooo oooooooo tested with 2 psu working fine with other S1 not sure is that mean part of the S1 board is defective?  |
|
|
|
thanks for replay, I disabled NTP client in System and removed broadcast address (blank) from setup , reboot, power off, on still can't ping anything and errors from system log Wed Mar 12 02:42:12 2014 kern.info kernel: [ 24.820000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected Wed Mar 12 02:42:44 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org' Wed Mar 12 02:42:44 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping Wed Mar 12 02:43:14 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org' Wed Mar 12 02:43:14 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping Wed Mar 12 02:43:44 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org' Wed Mar 12 02:43:44 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping Wed Mar 12 02:44:14 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org' Wed Mar 12 02:44:14 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping Wed Mar 12 02:44:20 2014 daemon.info sysinit: Alarm clock Wed Mar 12 02:44:20 2014 daemon.info sysinit: --bitmain-options 115200:32:8:40:350:4d81 -o http://stratum.bitcoin.cz:3333 -O raspberrypirobots.worker4:qwerty --api-listen --api-network Wed Mar 12 02:44:20 2014 daemon.info sysinit: - init complete - Wed Mar 12 02:45:01 2014 cron.info crond[576]: crond: USER root pid 984 cmd /usr/bin/cgminer-monitor What is the address of your router, are you sure it is 192.168.1.1? You need to have the correct address for your gateway and DNS. ups I forgot about that ... Thanks for help  LAN gateway 192.168.1.254 Primary DNS 68.94.156.1 this fixed everything |
|
|
|
hello I need some help to setup my AntMiner. I have psu cx500, I can connect to my miner using 192.168.1.99 , I updated all info regarding pool, worker, password ect. , but for some reason something is wrong with my setup. I can't ping any websites using ssh or gui: root@antMiner:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.  : 56 data bytes ^C --- 8.8.8.8 ping statistics --- 5 packets transmitted, 0 packets received, 100% packet loss also from system log: Wed Mar 12 01:49:53 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Mar 12 01:49:53 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Mar 12 01:50:00 2014 authpriv.notice dropbear[929]: Password auth succeeded for 'root' from 192.168.1.71:59830
Wed Mar 12 01:50:23 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Wed Mar 12 01:50:23 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Wed Mar 12 01:50:53 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Mar 12 01:50:53 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Mar 12 01:51:01 2014 cron.info crond[576]: crond: USER root pid 989 cmd /usr/bin/cgminer-monitor
Wed Mar 12 01:51:23 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Mar 12 01:51:23 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping Looks like I have a problem with DNS setup ? DNS server is not resolving ? I have miner connected to my 2WIRE router - ethernet cable My WAN setup: static address adress 192.168.1.99 netmask 255.255.255.0 gateway 192.168.1.1 brodcast 192.168.1.255 DNS 192.168.1.1 DHCP disable LAN setup: DHCP client SYSTEM NTP client enabled Please help ! also can anyone post link wher to download latest firmware for S1? Thanks You need to disable the NTP client or replace the addresses with other local ntp servers if you just google them. Also your broadcast address look incorrect, it should be the same as the ipv4 or just leave it blank. thanks for replay, I disabled NTP client in System and removed broadcast address (blank) from setup , reboot, power off, on still can't ping anything and errors from system log Wed Mar 12 02:42:12 2014 kern.info kernel: [ 24.820000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected Wed Mar 12 02:42:44 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org' Wed Mar 12 02:42:44 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping Wed Mar 12 02:43:14 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org' Wed Mar 12 02:43:14 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping Wed Mar 12 02:43:44 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org' Wed Mar 12 02:43:44 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping Wed Mar 12 02:44:14 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org' Wed Mar 12 02:44:14 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping Wed Mar 12 02:44:20 2014 daemon.info sysinit: Alarm clock Wed Mar 12 02:44:20 2014 daemon.info sysinit: --bitmain-options 115200:32:8:40:350:4d81 -o http://stratum.bitcoin.cz:3333 -O raspberrypirobots.worker4:qwerty --api-listen --api-network Wed Mar 12 02:44:20 2014 daemon.info sysinit: - init complete - Wed Mar 12 02:45:01 2014 cron.info crond[576]: crond: USER root pid 984 cmd /usr/bin/cgminer-monitor |
|
|
|
hello I need some help to setup my AntMiner. I have psu cx500, I can connect to my miner using 192.168.1.99 , I updated all info regarding pool, worker, password ect. , but for some reason something is wrong with my setup. I can't ping any websites using ssh or gui: root@antMiner:~# ping 8.8.8.8 PING 8.8.8.8 (8.8.8. : 56 data bytes ^C --- 8.8.8.8 ping statistics --- 5 packets transmitted, 0 packets received, 100% packet loss also from system log: Wed Mar 12 01:49:53 2014 daemon.info sysinit: ntpd: bad address '3.openwrt.pool.ntp.org'
Wed Mar 12 01:49:53 2014 daemon.info sysinit: ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
Wed Mar 12 01:50:00 2014 authpriv.notice dropbear[929]: Password auth succeeded for 'root' from 192.168.1.71:59830
Wed Mar 12 01:50:23 2014 daemon.info sysinit: ntpd: bad address '2.openwrt.pool.ntp.org'
Wed Mar 12 01:50:23 2014 daemon.info sysinit: ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Wed Mar 12 01:50:53 2014 daemon.info sysinit: ntpd: bad address '1.openwrt.pool.ntp.org'
Wed Mar 12 01:50:53 2014 daemon.info sysinit: ntpd: could not resolve peer 1.openwrt.pool.ntp.org, skipping
Wed Mar 12 01:51:01 2014 cron.info crond[576]: crond: USER root pid 989 cmd /usr/bin/cgminer-monitor
Wed Mar 12 01:51:23 2014 daemon.info sysinit: ntpd: bad address '0.openwrt.pool.ntp.org'
Wed Mar 12 01:51:23 2014 daemon.info sysinit: ntpd: could not resolve peer 0.openwrt.pool.ntp.org, skipping Looks like I have a problem with DNS setup ? DNS server is not resolving ? I have miner connected to my 2WIRE router - ethernet cable My WAN setup: static address adress 192.168.1.99 netmask 255.255.255.0 gateway 192.168.1.1 brodcast 192.168.1.255 DNS 192.168.1.1 DHCP disable LAN setup: DHCP client SYSTEM NTP client enabled Please help ! also can anyone post link wher to download latest firmware for S1? Thanks |
|
|
|
|
