Hi All,

I have a TB250 BTC Pro mother board and two RX580 GPU's connected to it. I have connected the RX 580's to the PCI slots but not to the Yellow main PCI slot.
If I don't do that the monitor signal is coming through my mother board DVI-D out.
Now my problem is when I switch on both the GPU fan's will start execute and after sometime one of the GPU's fan will stop running.
Inside the device manager I can see both the RX580 GPU's (Under Display adaparter).

Do you know what all are the BIOS settings for these GPU's? I'm fed up changing after watching all youtube video's but nothing works perfectly for me.

Thanks
Nrgl

Hi All,

Thanks much for all your inputs. Starts working after resetting the motherboard to defaults and then removing the GPU riser connection from main PCI slot to other one.
I also moved the GPU HDMI cable connection to monitor, to DVI-D port and monitor.

When restarted all started working as expected and windows loaded from SSD perfectly.


Now this is my first mining rig with two GPU cards.
I still have few more questions. I'm not sure to create new topics or post it here itself.
If you feel not like replying just say start a new topic.

1. Which is best mining software needed in windows 10 for mining ETH? I know its going to be POS soon, may be I'll mine until then.
2. I have two RX580 but from different manufacturers. Does that matter? Do I need to install gpu drivers for both the GPU's?
3. Which Wallets are you guys using to receive the mined coins rewards? Suggest something safe and secure. I have in mind is Jaxx and Trust or Myether wallet.
4. Suggest some good Altcoins that could be mined using RX580 graphics cards.

Thanks
NRGL

Hi All,

I'm building a mining rig and did all the setup and loaded windows 10 to my SSD (after replacing the laptop hdd with Ssd and installing windows). But when connected all my cables to the respective ports and started the rig, the bios is loaded during the first start. I set my DVD drive in Boot order as priority 1, then set SSD as priority 2. Now when I start the rig it gets stuck with a blank screen and the windows 10 is not loaded from the SSD, it's just a black screen in the monitor. (Connected the HDMI from main GPU to monitor)


I remove the SSD and tried to use in laptop and could load the windows 10 successfully.

Here few details of all peripherals i'm using in the Rig.

Mother board - TB 250 BTC Pro

CPU - Celeron 3930

PSU - EVGA 850 W GQ

GPU - Two RX580 (One is XFX made and another one ASUS made)

SSD - 256GB

Ram - 8GB DDR4

DVD drive

Can some one has a similar experience and know why the system is not booting ?