Driver:
https://mega.nz/file/4NRSiL6A#0jcBLJwhVfNhFrc9RgZeIa3xS5XGOl23ie6Ue439LBQInfo from someone on discord:
Summary so far on 3060:
-Use the 470.05 Dev Nvidia driver
-Need to stick the 3060 into motherboard directly (Does not work with riser)
-Must have at least pcie 3.0 enabled in bios, or set to auto
-HDMI/Display port of the graphics card needs to be either connected to a monitor or dummy plug
-2nd 3060 on the same mb will work as long as it is plugged into the x16 slot running x8 lanes or above with HDMI/Display port filled (not confirmed with 3 cards)
-Some have confirmed working cards after fresh windows install, then installing the 470.05 dev driver
-Works on ASUS STRIX/TUF/DUAL 3060, Palit 3060, EVGA black 3060, EVGA 3060 XC GAMING(12G-P5-3657-KR), Galax 3060, Gigabyte 3060 Vision OC, MSI Ventus 2x, MSI Gaming X, Zotac 3060 twin edge
-Does not work on Inno3D that we know of
EDIT2: It seems to have been tested on pci-X 4x slots and did not work. Only 8x and 16x work, with a dummy cable and no risers.
EDIT3: Current record for maximum number of 3060 on 1 mobo is 2 cards, running on x16 and x8 full slots.
EDIT4: 8x / 8x also seems to work.
Show Posts
