Really awesome project with great and intuitive minds behind it. Investing in this project was the best thing I have ever done in my life. If you want a stable roi this project is the one for you.

hey is there really a hiden dev fee? let me see the screenshot am not seeing it on the link below

ok so i did some research and testing of the obove firmware and below is what i concluded and found out

* The firmware is awesome,however there is hidden dev fees, yes thats when the machine constantly reboot or restart. This person program his firmware to restart every 5 or so minutes to set his mining wallet then after few minutes the system come back to normal.

Other than that good firmware but i would definitely stay away from this firmware.

Another thing is that there is a script that get run on the kernellog thats routing and unknown ip to a 40 something port, never seen that with antminer log before

s9 13.5th am getting stable 16 th currently but am wondering if the temp reading are correct

working really awesome on my s9. hope there is no dev fee or hidden dev fee. this firmware is one of the best i have come across so far, temp is very low on it. again really nice work

hey and how do i change the freq from 687 to higher? do you have any firmware that has freq higher than 687? miner advanced wont let me change freq because its fixed

another thing the miner gui vanishes every 5 or so minutes then come back up. am thinking this is your way of implimenting your dev fee. if not please fix it

ok thanks, so how can i increase the chip voltage to 923mv?

OK THANKS, so this will make the miner work over clock as when i use skylaker code above?

good day, i like the post u made to overclock bitmain s9, however when i set frequency to 1 it runs at 850mh as you said. Is there another code to set the fixed frequency to something like 700mhz? if you can can you please email me it at janoycuff@gmail.com  . im using 1600w psu and would want miner to run at 700mh