Show Posts
|
Pages: [1]
|
Are there any plans for XTL to be mineable with Teamredminer???
|
|
|
so I am mining Stellite and am using 8 rx580's running driver 18.6.1. when i get connected to the pool for about 3 minutes all 8 gpu's are recognized and hashing. after that it drops to only 4 gpu's hashing. running this on windows 10. Any ideas on how to resolve.
Thanks
|
|
|
i am using cast_xmr-vega and i think 18.9.3 and having some issues. i will try older version thanks
|
|
|
What is the best driver version to use for these cards for mining Stellite. I read somewhere that past a certain driver version would not work for mining this on windows 10? Thanks in advance
|
|
|
So i am using amr-stak with 8 msi rx580's armor oc. im getting about 3000 h/s and only pulling about 700 watts from the wall. Is this a decent hash rate. i have already made sure my gpu's are on compute mode and i have done whatever overclocking i can through msi afterburner. if my hash rate is too low what should i be doing differently? What's strange is when the miner starts the difficulty always decreases to about 400 before any of my shares are accepted by the pool.
thanks for your help.
|
|
|
Thanks for the help. i will definitely look through it all. Dont trust myself to do it quite yet.
|
|
|
If you flash them you will still consume nearly as much power and by flashing a BIOS the cards are never as stable as they are on default settings, so if you are getting 28.3 Mhs on each one of them by mining ethereum it is a really good hashrate.
If you need to flash them or would like to ,there are a lot of guides, in google, youtube and including this very specific area of the forum, just do a search.
yeah i am pretty happy with what i was able to achieve here without flashing. im pretty new and don't trust myself to do the flashing properly. now if i can just figure out how to mine stellite on smos ill be good to go. i am having an issue where i connect to the pool and get logged in but hashing never happens. very weird.
|
|
|
Hello everyone. i have setup my first 8gpu rig with msi rx580 armor oc edition. i am running on smos and need to know if i am killing my cards with these settings. they have been running for 3 days with no rejected or stale shares, no reboots and my temps are running in the low 60's. these cards have not been flashed as i don't know how to do that. i am getting about 28.3 MH/s per card.pulling about 1150 watts from the wall
Core MHz: 1230,1230,1230,1230,1230,1230,1230,1230
Memory MHz: 2300,2300,2300,2300,2300,2300,2300,2300
Core undervolt: 875,875,875,875,875,875,875,875
Aggressive undervolt:on
Powerstage: 5 Target Temperature ℃: 65 Minimum Fan speed %: 30
|
|
|
Hi guys. I am a total noob at this. so i have a mining cave riserless rig that came with smos installed on a 120 gb ssd. i have windows 10 on a bootable usb. when i boot my rig to try to get to the bios to change the boot, i can't seem to find it. it just goes to a bunch of code. Any ideas. i am trying to do this so i can bios mod my rx580's. unless there is a way to connect my cards to my laptop to bios mod them. any help is appreciated,
Thanks
|
|
|
|