Can we get the actual setting used to achieve this? Vega settings are posted like they are the new HOT instagram whore.

I ( and so does everyone else ) realize that bios mods/straps are available for the Rx series cards. so what, post settings so others can see what works and what doesnt.

so if you have settings for the rx-series cards post them. so others can see what changes are actually working vs guessing.


so far I have changed

tRFC setting down in 10's till 150 (from 219 WHEN MINING ) - stable
REF to 30 - stable

this gets me about 1kh more on an rx580 samsung memory 8gb ( MSI OC armor ) stock bios - for Turtlecoin algo ( CN/pico CN/trtl ) - 7khs @ 80watts ( 1150/2150 OC, undervolt -162 MSI AB )

ran into a small issue with Cuda Block size for turtle it seems. posted over on github.

*******

fixed, ran into issue with the config.json for the xmrig miners. Issue described on GIT for anyone else.

I grabbed the new release v19.02.1

swapped over my wallet/coin settings, changed a few things for me. (afterburner off, cpu mining on, cuda 10.0 firmware)

ran basic autostart with minergate, fairpool. no coin filter, no algo filter.

boom benchmarking QRL/MSR/TRTL/GRFT! no errors

so far so good, thanks for the help in getting it sorted. Im gona dive deeper into tweaking it and dialing in more coins/pools, if I run into anything else I will post over at github.

great work

thanks for the updates, I will grab the new files and try it out - I am only trying to help with issues, if this is not how you want this thread to be, let me know and we can take it to messages of somewhere else. Plus I am digging into the code myself to try and figure this out, I dont want you to think im just asking for you to fix it.

fresh install of v19.02, fresh config with JUST algo/wallets copied over from V19.01

*** turtlecoin  not recognized, out of the gate *** - CnTrtl, CnTurtle, CryptonightTurtle, CnPico, Cryptonight-Pico, Turtlecoin --- adding algo(s) to config/include folder algo file no change
*** Masari not recognized, out of the gate *** - CnHalf --- fixed by adding "CnHalf" to config ( NVIDIA/CPU sections)
*** Fairpool, CryptoKnight still get error for miner setting ( automatic ) - not valid miner mode - my impression was you could connect/ input multiple pools in the autostart.bat and it would check them all, or am I wrong? At this point I can only get one pool to connect under automatic mode. all versions

please rephrase this part for me
"P.S. You will need to add the algos in the config.ini, or just comment algos line, and will skip filtering and use all available" - just comment algos line? in the config, or start.bat?

it sounds like, if you delete all algos( or comment the area ) in config it defaults to the list in the include folder?

I dont want to exclude, I want to include turtlecoin. its not working

the basic portion where it finds the pools that match your algo/ wallet/ currency settings in the config doesnt find turtle coin pools on minerrocks and im not finding turtle coin on any other pools to test it ( other pools included in this program )

no worries I understand, just leaving this here to help you with bugs.

I am still having issues with Turtle showing on minerrocks. even though the changes are registering in the miners and the pool. I think the config file needs the algos added to the CPU / NVIDIA/AMD section. Ill try to add them and see how it goes

*** no change on my end in adding CnPico, CnTurtle, CnTrtl to algos listed in config.ini ***

I think lethean was a algo problem, I will try on fairpool with the new miners. in v19.02

*** fairpool lethean connected, but Fairpool is another that wont work under automatic miner settings. only works when set to manual/ coin ****

interesting note, while talking to the turtle network guys on discord. CryptoKnight shut down their turtle coin pool, but yet it shows up when the miner starts with it set to manual coin. ( and if you go to the pools site, sure enough its not there )

I just edited a bit, added a few issues. I will grab the new stuff from git and report back. thanks

yeah if the algo matches I dont think trtlstak is necessary

1. awesome miner! thanks for the hard work.

I got an issue with minerrocks and turtle coin I want to bounce off you, So I have the config file set. When I run autostart with the filters I want It grabs 3 pools ( MSR/QRL/GRAFT ) and everything works fine. but TRTL ( turtlecoin ) pool isnt found on minerrocks. if I filter down to JUST TRTL coin. it returns "NO POOLS!"

I tried to get on a different pool using the start.bat and choosing manual coin mode. cryptoKnight shows turtlecoin but the algo is the old one so It doesnt work. turtlecoin forked to CN-trtl recently and cryptoKnight shows it as cnlitev7. so it never mines.

posted on minerrocks discord 1-29-19 "Turtlecoin will fork from 1,200,000 (in two days) to new POW - cn-trtl ( https://github.com/turtlecoin/turtlecoin/releases )
Please use trtlstak 2.7.3 ( https://github.com/turtlecoin/trtl-stak/releases ) and new ports: 5003, 5005, 5007.
Other ports will be closed during fork."

might need to add trtlstak 2.7.3 for good measure to the miners. but I have used xmrig ( command line only ) to mine it setting currency to turtlecoin

and suggestions as to whats going on, and why the minerrocks pool isnt linking? another note actually. if you try to just show a coin list for minerrocks, it shows NOTHING. where the cryptoKnight pool returns coins that match my config. where minerrocks wont ( even though MSR/QRL/GRAFT work )

also I thought I read on here you have a discord channel for this, can you link me?

**** I have been investigating a few things to see if I can figure this out. some other issues popped up ****

I found that the pool CryptoKnight has similar pools as minerrocks. so I wanted to verify on that pool, if turtle etc is working.

1. when I set mining mode to Automatic I get a response of "mining mode not available for this pool" - setting it to manual mode gets it going, but defeats the multipool idea.

2. in manual mode, I set the coin to turtle - it fails because the algorithm is setting as lite-v7 not cntrtl, this is on the JCP cpu miner, and xmrig. somewhere its defaulting to the old algo for turtle.

3. I have lethean coin - previously intensecoin - cryptoKnight has a pool for it, but it wont recognize it when I start the miner. lethean is Cnv8

just upgraded from 19.01-19.02 no change in any of this