Bitcoin Forum
June 21, 2024, 09:48:30 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
  Home Help Search Login Register More  
  Show Posts
Pages: [1]
1  Bitcoin / Mining support / Re: S9 Hashboard error: 2 boards=0 chip, 1 board=33 chips on: March 08, 2019, 10:36:27 PM
chances are, those boards have rested in peace,

but i have encountered a similar issue where one of the boards was showin 0 asic but i fixed that by flushing another firmware 'auto-tune'

refer to this topic and read through > https://bitcointalk.org/index.php?topic=5034849.msg46000519#msg46000519

I used your recommended auto-feq firmware, but still found zero chips:-(
2  Bitcoin / Mining support / S9 Hashboard error: 2 boards=0 chip, 1 board=33 chips on: March 08, 2019, 12:12:17 AM
Hi all.

My S9 miner don't work fine, it seems that J6/J8 hashboard couldn't be found any chips, and J7 hashboard could find 33 chips. I know it's better to replace the 34th chip for J7, but i don't think it worth to do it.

I want to repair J6/J8 hashboard, i want know whether there are other solution to repair them except to replace 0th chips?

The following is the kernel log.

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000313] ps7-ttc #0 at df804000, irq=43
[    0.000625] Console: colour dummy device 80x30
[    0.000656] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040212] pid_max: default: 32768 minimum: 301
[    0.040436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042617] CPU: Testing write buffer coherency: ok
[    0.042965] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043025] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043252] L310 cache controller enabled
[    0.043271] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121045] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210365] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210392] CPU: All CPU(s) started in SVC mode.
[    0.211090] devtmpfs: initialized
[    0.213503] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214755] regulator-dummy: no parameters
[    0.223753] NET: Registered protocol family 16
[    0.226073] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228390] cpuidle: using governor ladder
[    0.228404] cpuidle: using governor menu
[    0.235959] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237506] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237520] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237642] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259898] bio: create slab <bio-0> at 0
[    0.261627] vgaarb: loaded
[    0.262345] SCSI subsystem initialized
[    0.263235] usbcore: registered new interface driver usbfs
[    0.263408] usbcore: registered new interface driver hub
[    0.263639] usbcore: registered new device driver usb
[    0.264181] media: Linux media interface: v0.10
[    0.264351] Linux video capture interface: v2.00
[    0.264594] pps_core: LinuxPPS API ver. 1 registered
[    0.264606] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.264731] PTP clock support registered
[    0.265099] EDAC MC: Ver: 3.0.0
[    0.266176] Advanced Linux Sound Architecture Driver Initialized.
[    0.269190] DMA-API: preallocated 4096 debug entries
[    0.269206] DMA-API: debugging enabled by kernel config
[    0.269295] Switched to clocksource arm_global_timer
[    0.290771] NET: Registered protocol family 2
[    0.291452] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291509] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291595] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291640] TCP: reno registered
[    0.291659] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291693] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291948] NET: Registered protocol family 1
[    0.292311] RPC: Registered named UNIX socket transport module.
[    0.292324] RPC: Registered udp transport module.
[    0.292332] RPC: Registered tcp transport module.
[    0.292341] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292354] PCI: CLS 0 bytes, default 64
[    0.292816] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294881] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.297089] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.297285] msgmni has been set to 967
[    0.298098] io scheduler noop registered
[    0.298112] io scheduler deadline registered
[    0.298153] io scheduler cfq registered (default)
[    0.308496] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308517] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.433218] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.000521] console [ttyPS0] enabled
[    1.004809] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.012464] [drm] Initialized drm 1.1.0 20060810
[    1.029639] brd: module loaded
[    1.039054] loop: module loaded
[    1.048636] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.054532] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.062675] libphy: XEMACPS mii bus: probed
[    1.067046] ------------- phy_id = 0x3625e62
[    1.072140] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.080799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.087418] ehci-pci: EHCI PCI platform driver
[    1.094674] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.101517] usbcore: registered new interface driver usb-storage
[    1.108374] mousedev: PS/2 mouse device common for all mice
[    1.114537] i2c /dev entries driver
[    1.121577] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.127066] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.132983] Xilinx Zynq CpuIdle Driver started
[    1.137839] sdhci: Secure Digital Host Controller Interface driver
[    1.144007] sdhci: Copyright(c) Pierre Ossman
[    1.148280] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.155136] mmc0: no vqmmc regulator found
[    1.159151] mmc0: no vmmc regulator found
[    1.199315] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.208042] usbcore: registered new interface driver usbhid
[    1.213547] usbhid: USB HID core driver
[    1.218302] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224598] nand: Micron MT29F2G08ABAEAWP
[    1.228565] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234512] Bad block table found at page 131008, version 0x01
[    1.240732] Bad block table found at page 130944, version 0x01
[    1.246784] 3 ofpart partitions found on MTD device pl353-nand
[    1.252569] Creating 3 MTD partitions on "pl353-nand":
[    1.257655] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265737] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.273079] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.282089] TCP: cubic registered
[    1.285324] NET: Registered protocol family 17
[    1.290049] Registering SWP/SWPB emulation handler
[    1.295956] regulator-dummy: disabling
[    1.300350] UBI: attaching mtd1 to ubi0
[    1.826859] UBI: scanning is finished
[    1.838513] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.845594] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.852354] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.859018] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.865896] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.871876] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.878983] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803
[    1.888026] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.897245] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.897250] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.901323] ALSA device list:
[    1.901327]   No soundcards found.
[    1.917714] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.946680] UBIFS: recovery needed
[    2.023308] UBIFS: recovery completed
[    2.026979] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.032930] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.042035] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.051960] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.056954] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    2.068261] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.075459] devtmpfs: mounted
[    2.078568] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.921003] random: dd urandom read with 0 bits of entropy available
[    3.319329]
[    3.319329] bcm54xx_config_init
[    3.929326]
[    3.929326] bcm54xx_config_init
[    7.930171] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.936258] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.105997] In axi fpga driver!
[   23.109071] request_mem_region OK!
[   23.112502] AXI fpga dev virtual address is 0xdf9fc000
[   23.117568] *base_vir_addr = 0x8c510
[   23.133070] In fpga mem driver!
[   23.136143] request_mem_region OK!
[   23.139734] fpga mem virtual address is 0xe2000000
[   23.929351]
[   23.929351] bcm54xx_config_init
[   24.559317]
[   24.559317] bcm54xx_config_init
[   28.560168] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   28.566194] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  131.503768] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8010ec4162bb885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[9] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[28] has core num=2
Chain[7] ASIC[38] has core num=15
Chain[7] ASIC[56] has core num=15
Chain[7] ASIC[59] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1376 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 2922 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8010ec4162bb885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=5640
get fan[2] speed=5880
get fan[5] speed=5640
get fan[2] speed=5880
get fan[5] speed=5640
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J7] has core num in PIC
Chain[J7] ASIC[9] has core num=1
miner total rate=4574GH/s fixed rate=4500GH/s
read PIC voltage=940 on chain[6]
Chain:6 chipnum=33
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637

Chain:6 max freq=637
Chain:6 min freq=637


Miner fix freq ...
read PIC voltage=940 on chain[6]
Chain:6 chipnum=33
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=637
Asic[ 0]:637
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637

Chain:6 max freq=637
Chain:6 min freq=637

max freq = 637
set baud=1
Chain[J7] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[6]
get send work num :57456 on Chain[6]
wait recv nonce on chain[6]
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=00 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=00 asic[07]=00
asic[08]=00 asic[09]=00 asic[10]=00 asic[11]=00 asic[12]=00 asic[13]=00 asic[14]=00 asic[15]=00
asic[16]=00 asic[17]=00 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=00 asic[22]=00 asic[23]=00
asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00
asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00
asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00
asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00
asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=00

asic[01]=00

asic[02]=00

asic[03]=00

asic[04]=00

asic[05]=00

asic[06]=00

asic[07]=00

asic[08]=00

asic[09]=00

asic[10]=00

asic[11]=00

asic[12]=00

asic[13]=00

asic[14]=00

asic[15]=00

asic[16]=00

asic[17]=00

asic[18]=00

asic[19]=00

asic[20]=00

asic[21]=00

asic[22]=00

asic[23]=00

asic[24]=00

asic[25]=00

asic[26]=00

asic[27]=00

asic[28]=00

asic[29]=00

asic[30]=00

asic[31]=00

asic[32]=00

asic[33]=00

asic[34]=00

asic[35]=00

asic[36]=00

asic[37]=00

asic[38]=00

asic[39]=00

asic[40]=00

asic[41]=00

asic[42]=00

asic[43]=00

asic[44]=00

asic[45]=00

asic[46]=00

asic[47]=00

asic[48]=00

asic[49]=00

asic[50]=00

asic[51]=00

asic[52]=00

asic[53]=00

asic[54]=00

asic[55]=00

asic[56]=00

asic[57]=00

asic[58]=00

asic[59]=00

asic[60]=00

asic[61]=00

asic[62]=00



freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637

total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[6]
get send work num :57456 on Chain[6]
wait recv nonce on chain[6]
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=00 asic[01]=00 asic[02]=00 asic[03]=00 asic[04]=00 asic[05]=00 asic[06]=00 asic[07]=00
asic[08]=00 asic[09]=00 asic[10]=00 asic[11]=00 asic[12]=00 asic[13]=00 asic[14]=00 asic[15]=00
asic[16]=00 asic[17]=00 asic[18]=00 asic[19]=00 asic[20]=00 asic[21]=01 asic[22]=00 asic[23]=00
asic[24]=00 asic[25]=00 asic[26]=00 asic[27]=00 asic[28]=00 asic[29]=00 asic[30]=00 asic[31]=00
asic[32]=00 asic[33]=00 asic[34]=00 asic[35]=00 asic[36]=00 asic[37]=00 asic[38]=00 asic[39]=00
asic[40]=00 asic[41]=00 asic[42]=00 asic[43]=00 asic[44]=00 asic[45]=00 asic[46]=00 asic[47]=00
asic[48]=00 asic[49]=00 asic[50]=00 asic[51]=00 asic[52]=00 asic[53]=00 asic[54]=00 asic[55]=00
asic[56]=00 asic[57]=00 asic[58]=00 asic[59]=00 asic[60]=00 asic[61]=00 asic[62]=00


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=00

asic[01]=00

asic[02]=00

asic[03]=00

asic[04]=00

asic[05]=00

asic[06]=00

asic[07]=00

asic[08]=00

asic[09]=00

asic[10]=00

asic[11]=00

asic[12]=00

asic[13]=00

asic[14]=00

asic[15]=00

asic[16]=00

asic[17]=00

asic[18]=00

asic[19]=00

asic[20]=00

asic[21]=01
asic[22]=00

asic[23]=00

asic[24]=00

asic[25]=00

asic[26]=00

asic[27]=00

asic[28]=00

asic[29]=00

asic[30]=00

asic[31]=00

asic[32]=00

asic[33]=00

asic[34]=00

asic[35]=00

asic[36]=00

asic[37]=00

asic[38]=00

asic[39]=00

asic[40]=00

asic[41]=00

asic[42]=00

asic[43]=00

asic[44]=00

asic[45]=00

asic[46]=00

asic[47]=00

asic[48]=00

asic[49]=00

asic[50]=00

asic[51]=00

asic[52]=00

asic[53]=00

asic[54]=00

asic[55]=00

asic[56]=00

asic[57]=00

asic[58]=00

asic[59]=00

asic[60]=00

asic[61]=00

asic[62]=00



freq[00]=637 freq[01]=637 freq[02]=637 freq[03]=637 freq[04]=637 freq[05]=637 freq[06]=637 freq[07]=637
freq[08]=637 freq[09]=637 freq[10]=637 freq[11]=637 freq[12]=637 freq[13]=637 freq[14]=637 freq[15]=637
freq[16]=637 freq[17]=637 freq[18]=637 freq[19]=637 freq[20]=637 freq[21]=637 freq[22]=637 freq[23]=637
freq[24]=637 freq[25]=637 freq[26]=637 freq[27]=637 freq[28]=637 freq[29]=637 freq[30]=637 freq[31]=637
freq[32]=637 freq[33]=637 freq[34]=637 freq[35]=637 freq[36]=637 freq[37]=637 freq[38]=637 freq[39]=637
freq[40]=637 freq[41]=637 freq[42]=637 freq[43]=637 freq[44]=637 freq[45]=637 freq[46]=637 freq[47]=637
freq[48]=637 freq[49]=637 freq[50]=637 freq[51]=637 freq[52]=637 freq[53]=637 freq[54]=637 freq[55]=637
freq[56]=637 freq[57]=637 freq[58]=637 freq[59]=637 freq[60]=637 freq[61]=637 freq[62]=637

total valid nonce number:1
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:1
last_nonce_num:0
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
setStartTimePoint total_tv_start_sys=436 total_tv_end_sys=437
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=3.77400 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[6]
Done read temp on Chain[6]
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=3116
Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!