kerney666 - thanks for moving the ETH Cfg values into the upper table of detail stats with the v0.7.19 release.  Was going to request something like that, so ETH Cfg didn't take up it's own section of extra lines per gpu, but now it's already nice and compacted.

Hello gents, I have a feature request to make TRM even better.  Similar to "--temp_limit=TEMP", please add config setting for a Navi memory temperature limit.  I have a few 5700's that sometimes push upper 90's for mem temp, even with fans at 100%.  Would be awesome if TRM did gradual intensity ramp down to stay under the temp limit.

Alternatively, if the existing --temp_limit would accept a list to customize per GPU, could (indirectly) keep Navi mem temps roughly under a target.

Hello pumuckl,
Were you able to get cpuminer-multi mining on your Rock Pi 4 mining?  I'm considering buying the Rock Pi 4, and wondering what kind of hashrates and power usage you are getting?  Have you tried other miners like Xmrig?

Thanks

Hello doktor83
I found a minor bug with setting intensity on the turtle algo.  Auto settings are very good (thanks to you), and I get well over 8k hashrate with my rx480 8gb cards auto set at 104 intensity.  But I do want to tweak intensity a bit for each of my cards to get the last bit of hashrate and long-running stability.  However when I manually set intensity, even to the same 104 value picked by auto, hashrate drops to below 6k.  Here are my settings:

--ccryptonighttype turtle --cpool pool --cwallet wallet --cpassword workername --logfile srbmineTRTL.log --ckeepalive true --cnicehash false --showstales --gpureorder --cgpuid 0,1,2,3,4 --cgputhreads 2,2,2,2,2 --cgpuintensity 0,0,0,0,0 --minrigspeed 41000

When I change only intensity setting to --cgpuintensity 0,104,0,0,0 then that one card set manually has large hashrate drop.  I've tried all 5 of my cards with same results.  I discovered this on v1.8.1, and it still happens with latest v.1.8.2.  Didn't try it on previous versions.

I also mine haven algo, and manual intensity setting is working fine there and I can get max hashrate/stability dialed in.  Thanks for taking a look at this when you get a chance.