I am running a P2Pool node in Germany:

    fast internet connection
    Debian Server equipped with SSD, tuned for low latency
    no fee (0%)


How to connect:
Server = http://78.47.241.34:12347
Username = your AUR wallet address
Password = choose a whatever random password

Frontend:
http://78.47.241.34:12347/static

Complete p2pool list:

http://78.47.241.34:8084

Highlights:

    No registration, start mining directly
    Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
    Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
    Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
    Decentralized network, harder to attack
    Transactionfee's in a block will also by payed to all miners in the pool
    Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup


Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.

You will have more stales/rejects, around 10 ~ 20% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate.

happy mining & enjoy payments

I am running a P2Pool node in Germany:

    fast internet connection
    Debian Server equipped with SSD, tuned for low latency
    no fee (0%)


How to connect:
Server = http://78.47.241.34:25490
Username = your SPA wallet address
Password = choose a whatever random password

Frontend:
http://78.47.241.34:25490/static

Highlights:

    No registration, start mining directly
    Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
    Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
    Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
    Decentralized network, harder to attack
    Transactionfee's in a block will also by payed to all miners in the pool
    Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup


Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.

You will have more stales/rejects, around 10 ~ 20% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate.

happy mining & enjoy payments

make obj folder inside src ;-)

I am running a P2Pool node in Germany  :

    fast internet connection
    Debian Server equipped with SSD, tuned for low latency
    no fee (0%)


How to connect:
Server = http://78.47.241.34:25490
Username = your SPA wallet address
Password = choose a whatever random password

Frontend:
http://78.47.241.34:25490/static

Highlights:

    No registration, start mining directly
    Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
    Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
    Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
    Decentralized network, harder to attack
    Transactionfee's in a block will also by payed to all miners in the pool
    Switch between different p2pool nodes without penalty. Payments will continue, they are all connected --> just setup another P2Pool node or two as backup


Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.

You will have more stales/rejects, around 10 ~ 20% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate.

happy mining & enjoy payments

p2pool, 0% fee

How to connect:
Server = http://78.47.241.34:12347
Username = your AUR wallet address
Password = choose a whatever random password

Example cgminer config:
cgminer --scrypt -o stratum+tcp://78.47.241.34:12347 -u AagW2ak7TZbKzZnQkDFqiEdDKhzZAwgGqr -p x --expiry 1 --scan-time 1 --queue 0

(Make sure to use your Auroracoin address as your username or you will be donating your hashes to the node operator)

Frontend:

http://78.47.241.34:12347/static

Highlights:

    No registration, start mining directly
    Lightweight pool frontend, responsive design also perfect for browsing with tablet or smartphone
    Node heartbeat live displayed on frontend, updating every 10 seconds also on smartphone and tablet PC
    Fast and direct payments (PPLNS) into your wallet instead of a central wallet managed by someone you don't know
    Decentralized network, harder to attack
    Transactionfee's in a block will also by payed to all miners in the pool

Hints to succes:
You will receive small payments very soon, these payments will get higher as longer you run on P2Pool. You should mine at least 24 hours to get an idea.
You should consider mining this pool if you have a minimum hashrate of 1 Mh/s. Lower hashrates are not recommended because it's not efficient. If you have a lower hashrate you should think about using a normal pool.

You will have more stales/rejects, around 10 ~ 20% is normal with P2Pool technology. You may have to play with the intensity. With P2Pools you should normally lower your intensity one or two steps down. Just look at the accept/reject rate.

p2pool :-)

http://78.47.241.34:8866/static

Please join

new extended p2pool list, now with response time ;-)

http://aurp2pool.no-ip.org:8084

please join.

Does anyone know the settings for p2pool networks.py file? I want to set up p2pool for this coin ;-)

litecoin example:

/networks.py

litecoin=math.Object(
        PARENT=networks.nets['litecoin'],
        SHARE_PERIOD=15, # seconds
        CHAIN_LENGTH=24*60*60//10, # shares
        REAL_CHAIN_LENGTH=24*60*60//10, # shares
        TARGET_LOOKBEHIND=200, # shares
        SPREAD=3, # blocks
        IDENTIFIER='e037d5b8c6923410'.decode('hex'),
        PREFIX='7208c1a53ef629b0'.decode('hex'),
        P2P_PORT=9338,
        MIN_TARGET=0,
        MAX_TARGET=2**256//2**20 - 1,
        PERSIST=True,
        WORKER_PORT=9327,
        BOOTSTRAP_ADDRS='forre.st vps.forre.st'.split(' '),
        ANNOUNCE_CHANNEL='#p2pool-ltc',
        VERSION_CHECK=lambda v: True,
        VERSION_WARNING=lambda v: 'Upgrade Litecoin to >=0.8.5.1!' if v < 80501 else None,
    ),

/bitcoin/networks.py

litecoin=math.Object(
        P2P_PREFIX='fbc0b6db'.decode('hex'),
        P2P_PORT=9333,
        ADDRESS_VERSION=48,
        RPC_PORT=9332,
        RPC_CHECK=defer.inlineCallbacks(lambda bitcoind: defer.returnValue(
            'litecoinaddress' in (yield bitcoind.rpc_help()) and
            not (yield bitcoind.rpc_getinfo())['testnet']
        )),
        SUBSIDY_FUNC=lambda height: 50*100000000 >> (height + 1)//840000,
        POW_FUNC=lambda data: pack.IntType(256).unpack(__import__('ltc_scrypt').getPoWHash(data)),
        BLOCK_PERIOD=150, # s
        SYMBOL='LTC',
        CONF_FILE_FUNC=lambda: os.path.join(os.path.join(os.environ['APPDATA'], 'Litecoin') if platform.system() == 'Windows' else os.path.expanduser('~/Library/Application Support/Litecoin/') if platform.system() == 'Darwin' else os.path.expanduser('~/.litecoin'), 'litecoin.conf'),
        BLOCK_EXPLORER_URL_PREFIX='http://explorer.litecoin.net/block/',
        ADDRESS_EXPLORER_URL_PREFIX='http://explorer.litecoin.net/address/',
        TX_EXPLORER_URL_PREFIX='http://explorer.litecoin.net/tx/',
        SANE_TARGET_RANGE=(2**256//1000000000 - 1, 2**256//1000 - 1),
        DUMB_SCRYPT_DIFF=2**16,
        DUST_THRESHOLD=0.03e8,
    ),



Thanks.

~40 public p2pool nodes list for auroracoin

http://aurp2pool.no-ip.org:8084

mine on public p2pool network with 0% fee

list of public p2pool nodes:

http://78.47.241.34:8084

current pool speed: 1004.08 Mh/s and growing ;-)

another new p2pool


http://aurp2pool.no-ip.org:12347/static/

0% fee
global pool rate ~2MH/s

please join us to solve some blocks

Example cgminer config:
cgminer --scrypt -o stratum+tcp://aurp2pool.no-ip.org:12347 -u AagW2ak7TZbKzZnQkDFqiEdDKhzZAwgGqr -p x

Example minerd config:
minerd -o stratum+tcp://aurp2pool.no-ip.org:12347 -u AagW2ak7TZbKzZnQkDFqiEdDKhzZAwgGqr -p x

PS.
Make sure to use your Auroracoin address as your username or you will be donating your hashes to the node operator.

My Little Contribution to AuroraCoin network :-)

http://aurp2pool.no-ip.org:8084