Latest posts of: ehwwong

Show Posts
Pages: [1] 2 »

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 09, 2014, 05:17:17 AM

Quote from: Anonymailer on March 09, 2014, 03:38:36 AM Quote from: nwoolls on March 08, 2014, 05:47:14 PM More 2 cents from me (hope to know more later): The 5-chip units use the Apple CDC drivers, not FTDI drivers. Only the 1-chip units seem to use FTDI. ~~Ah, damn, what about pre 10.9?~~ CDC not FTDI, right what can i do to test/confirm this?

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 08, 2014, 04:23:58 PM

Quote from: Anonymailer on March 07, 2014, 09:52:49 PM Quote from: ehwwong on March 07, 2014, 08:28:33 AM OK, so exactly what i did. removed the previous gridseed5 unplug my miner and plug it back run sudo kextload -b com.FTDI.driver.FTDIUSBSerialDriver at terminal start gridseed6 GPU miner pops up automatically. Close it. Click on cgminer and insert the manual flag - --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0 Check on pool settings.. click save and then START... unfortunately still getting the same error Can you please try this version with the drivers unloaded? Hi, Unfortunately unloading the drivers did not make any difference on cgminer.

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 08:28:33 AM

OK, so exactly what i did. removed the previous gridseed5 unplug my miner and plug it back run sudo kextload -b com.FTDI.driver.FTDIUSBSerialDriver at terminal start gridseed6 GPU miner pops up automatically. Close it. Click on cgminer and insert the manual flag - --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0 Check on pool settings.. click save and then START... unfortunately still getting the same error below. 2014-03-07 16:25:02] Started cgminer 3.8.5 [2014-03-07 16:25:02] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 16:25:03] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 16:25:03] No devices detected! [2014-03-07 16:25:03] Waiting for USB hotplug devices or press q to quit [2014-03-07 16:25:03] Probing for an alive pool [2014-03-07 16:25:06] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 16:25:07] Pool 0 difficulty changed to 205.124450 [2014-03-07 16:25:08] Pool 0 difficulty changed to 189.594947 [2014-03-07 16:25:08] Network diff set to 3.81G [2014-03-07 16:25:09] Stratum from pool 0 requested work restart [2014-03-07 16:25:13] API running in IP access mode on port 4048 (24) [2014-03-07 16:25:02] Started cgminer 3.8.5 [2014-03-07 16:25:02] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 16:25:03] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 16:25:03] No devices detected! [2014-03-07 16:25:03] Waiting for USB hotplug devices or press q to quit [2014-03-07 16:25:03] Probing for an alive pool [2014-03-07 16:25:06] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 16:25:07] Pool 0 difficulty changed to 205.124450 [2014-03-07 16:25:08] Pool 0 difficulty changed to 189.594947 [2014-03-07 16:25:08] Network diff set to 3.81G [2014-03-07 16:25:09] Stratum from pool 0 requested work restart [2014-03-07 16:25:13] API running in IP access mode on port 4048 (24) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 16:25:15] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 16:25:15] gridseed detect (253:6) failed to initialise (incorrect device?) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 16:25:21] gridseed detect (253:6) failed to initialise (incorrect device?)

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 07:13:53 AM

@Anonymailer, While the pleasure is mine man, you helped me get this up and running! Otherwise, this would be an expensive mistake.. LOL BTW, cgminer still insist not to work. After unload/load the FTDI driver from nwolls it didn't make any difference. Still getting the same error. Maunal Flag - --dual [2014-03-07 15:13:22] Started cgminer 3.8.5 [2014-03-07 15:13:22] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 15:13:23] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 15:13:23] No devices detected! [2014-03-07 15:13:23] Waiting for USB hotplug devices or press q to quit [2014-03-07 15:13:23] Probing for an alive pool [2014-03-07 15:13:26] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 15:13:27] Pool 0 difficulty changed to 213.749153 [2014-03-07 15:13:28] Pool 0 difficulty changed to 211.222290 [2014-03-07 15:13:28] Network diff set to 3.81G [2014-03-07 15:13:28] Stratum from pool 0 requested work restart

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 06:38:51 AM

FWIW, i am getting 393 KH/s harsh rate running at freq-800 with CPU Miner. I will meddle more with cgminer when i have time later in the day. Thanks for everything!

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 05:20:55 AM

Quote from: Anonymailer on March 07, 2014, 05:12:05 AM @ ehwwong I'd be interested to know whether the cgminer works with the FTDI drivers installed and not unloaded but I suspect the problem is my fix to the driver not working properly so I'll have to look in to that some more. It's not that it doesn't see the device, it is showing up there, it's just not working Did you run CPU successfully before or after unloading the drivers and had you installed the FTDI driver from here: http://ftdichip.com/Drivers/VCP.htm ? @BrandonMcPherson I suspect the issue with CPU miner is a driver issue more likely than a VM issue if it's showing up to any extent in the cgminer log. What driver setup were you using, what manual flags and what does the CPU miner output say? Hi, In fact CPU Miner runs before and after unloading the drivers.. weird? Is there any command i can check that the VCP driver is still loaded? Or maybe the kexunload did not work correctly on my iMAC? Yes, i install it from http://ftdichip.com/Drivers/VCP.htm You want me to just reload the VCP driver again?

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 05:09:30 AM

Quote from: BrandonMcPherson on March 07, 2014, 05:04:14 AM I wasn't able to duplicate ehwwong's success with CPUminer, and CGminer returned the same "failed to initialise (incorrect device?)" error he saw. I suspect my CPUminer issue is related to my virtual machine Linux installation still claiming the device, so don't make too much of that. I'll fiddle with it some more. Brandon, Did you setup the manual flag - --freq=600 --gc3355=/dev/cu.usbmodemfdxxxx ?

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 05:06:35 AM

CGminer proofs to be more tricky, already ran the kextunload command and restart macminer but still getting: 2014-03-07 13:00:35] Started cgminer 3.8.5 [2014-03-07 13:00:35] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 13:00:37] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 13:00:37] No devices detected! [2014-03-07 13:00:37] Waiting for USB hotplug devices or press q to quit [2014-03-07 13:00:37] Probing for an alive pool [2014-03-07 13:00:39] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 13:00:40] Pool 0 difficulty changed to 199.535929 [2014-03-07 13:00:41] Pool 0 difficulty changed to 189.433645 [2014-03-07 13:00:41] Network diff set to 3.81G [2014-03-07 13:00:41] Stratum from pool 0 requested work restart [2014-03-07 13:00:47] API running in IP access mode on port 4048 (24) [2014-03-07 13:00:35] Started cgminer 3.8.5 [2014-03-07 13:00:35] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 13:00:37] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 13:00:37] No devices detected! [2014-03-07 13:00:37] Waiting for USB hotplug devices or press q to quit [2014-03-07 13:00:37] Probing for an alive pool [2014-03-07 13:00:39] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 It seems that CGMiner cannot detect the gridseed miner... is there anyway to force detection like CPU Miner where i can tell it to look under /dev/cu.usbmodemfd1421 ? Experiment with manual flag freq from 600 ~ 800 yields the same result.. --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 04:54:17 AM

Quote from: Anonymailer on March 07, 2014, 04:40:00 AM Oooh sounds like it's working then! Thanks guys! To check your work go here http://pool.fabulouspanda.co.uk:9327/static/graphs.html?Day and look for your LTC address. I'm hoping LfTBLS7pycKpxkVu5XYYhAxnVqwSHUabRX is you? Yeah, CPU miner is definitely working now. And LfTBLS7pycKpxkVu5XYYhAxnVqwSHUabRX is me ... Trying to get cgminer to work now. I suspect it has to be the manual flag, will try to dig more.

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 04:26:01 AM

Quote from: Anonymailer on March 07, 2014, 04:03:13 AM odd that you have accepts but 0KH! Does the pool website show the work yet? any more detail in the log? Did you run the kextunload command since your last restart the last time you ran cgminer? [/quote] Hey, i am actually still on the legacy http://pool.fabulouspanda.co.uk:9327 pool, how do i find the work there? The CPU Miner log window is not allowing me to copy/paste the log. Hmmm i don't remember, but i better restart everything and try the cgminer again.

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 04:00:37 AM

OK, i think we are getting some where.. on gridseed5, CPU Miner... after setting up manual flag - --freq=600 --gc3355=/dev/cu.usbmodemfd1421 i am getting this: Dispatching new work for GC3355 LTC Core .... And i can see the Accepted: 3 of 3 100% !!! ps: the KH/s is showing 0.00KH

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 03:57:09 AM

Quote from: Anonymailer on March 07, 2014, 02:49:44 AM Quote from: ehwwong on March 07, 2014, 02:41:19 AM OK, i removed a previously installed bluetooth device with serial port... right now, ls -l /dev/cs.* only shows the below. crw-rw-rw- 1 root wheel 18, 7 Mar 7 02:24 /dev/cu.Bluetooth-Incoming-Port crw-rw-rw- 1 root wheel 18, 3 Mar 7 02:24 /dev/cu.Bluetooth-Modem crw-rw-rw- 1 root wheel 18, 11 Mar 7 10:39 /dev/cu.usbmodemfd1421 started CG Miner but still getting this: [2014-03-07 10:38:17] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 10:38:17] gridseed detect (253:6) failed to initialise (incorrect device?) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 10:38:23] gridseed detect (253:6) failed to initialise (incorrect device?) Any luck with the CPU Miner? I modified the driver for cgminer based on the reports on this version, the standard gridseed code doesn't compile on Mac OS so it's slightly modified by me http://downloads.fabulouspanda.co.uk/MacMiner-gridseed5.zip err, what manual flag should i be using for CPU miner? On Gridseed5, CG Miner, manual flag - --gridseed-options=baud=115200,freq=600,chips=5,modules=1,usefifo=0,btc=16 --hotplug=0 [2014-03-07 11:55:26] Started cgminer 3.8.5 [2014-03-07 11:55:26] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 11:55:28] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 11:55:28] No devices detected! [2014-03-07 11:55:28] Waiting for USB hotplug devices or press q to quit [2014-03-07 11:55:28] Probing for an alive pool [2014-03-07 11:55:31] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 11:55:32] Pool 0 difficulty changed to 174.855851 [2014-03-07 11:55:33] Pool 0 difficulty changed to 173.050674 [2014-03-07 11:55:33] Network diff set to 3.81G [2014-03-07 11:55:33] Stratum from pool 0 requested work restart

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 02:41:19 AM

OK, i removed a previously installed bluetooth device with serial port... right now, ls -l /dev/cs.* only shows the below. crw-rw-rw- 1 root wheel 18, 7 Mar 7 02:24 /dev/cu.Bluetooth-Incoming-Port crw-rw-rw- 1 root wheel 18, 3 Mar 7 02:24 /dev/cu.Bluetooth-Modem crw-rw-rw- 1 root wheel 18, 11 Mar 7 10:39 /dev/cu.usbmodemfd1421 started CG Miner but still getting this: [2014-03-07 10:38:17] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 10:38:17] gridseed detect (253:6) failed to initialise (incorrect device?) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 10:38:23] gridseed detect (253:6) failed to initialise (incorrect device?)

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 02:35:16 AM

Quote from: Anonymailer on March 07, 2014, 01:21:18 AM please update to this version: http://downloads.fabulouspanda.co.uk/MacMiner-gridseed4.zip Which fixes that issue, sorry about that! I think the problem with cgminer is that this version wants you to unload any serial usb drivers from the system so try running sudo kextunload -b Library/Extensions/SiLabsUSBDriver.kext && sudo kextunload -b Library/Extensions/SiLabsUSBDriver64.kext && sudo kextunload -b Library/Extensions/FTDIUSBSerialDriver.kext && kextunload -b com.silabs.driver.CP210xVCPDriver && kextunload -b com.silabs.driver.CP210xVCPDriver64 && kextunload -b com.FTDI.driver.FTDIUSBSerialDriver && kextunload -b com.silabs.driver.CP210xVCPDriver && kextunload -b com.silabs.driver.CP210xVCPDriver64 && kextunload -b com.FTDI.driver.FTDIUSBSerialDriver && kextunload -b Library/Extensions/SiLabsUSBDriver.kext && kextunload -b Library/Extensions/SiLabsUSBDriver64.kext && kextunload -b Library/Extensions/FTDIUSBSerialDriver.kext in Terminal first then start cgminer again! after entering the above in terminal, i get this: (kernel) Kext Library/Extensions/SiLabsUSBDriver.kext not found for unload request. Failed to unload Library/Extensions/SiLabsUSBDriver.kext - (libkern/kext) not found.

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 02:31:23 AM

@anonymailer FYI - macminer 4 cpu miner works now. [2014-03-07 10:29:31] 2 miner threads started, using 'scrypt' algorithm. [2014-03-07 10:29:31] Binding thread 0 to cpu 0 [2014-03-07 10:29:31] Binding thread 1 to cpu 1 [2014-03-07 10:29:32] Starting Stratum on stratum+tcp://pool.fabulouspanda.co.uk:9327 [2014-03-07 10:29:34] Stratum detected new block [2014-03-07 10:29:35] Stratum detected new block [2014-03-07 10:29:35] thread 1: 1656 hashes, 5.79 khash/s [2014-03-07 10:29:35] thread 0: 1572 hashes, 5.40 khash/s [2014-03-07 10:29:56] Stratum detected new block [2014-03-07 10:29:56] thread 0: 114804 hashes, 5.66 khash/s [2014-03-07 10:29:56] thread 1: 114852 hashes, 5.66 khash/s [2014-03-07 10:30:38] stratum_recv_line failed [2014-03-07 10:30:38] Stratum connection interrupted [2014-03-07 10:30:38] thread 0: 219912 hashes, 5.16 khash/s [2014-03-07 10:30:38] thread 1: 221844 hashes, 5.20 khash/s [2014-03-07 10:30:40] Stratum detected new block [2014-03-07 10:30:41] Stratum detected new block [2014-03-07 10:30:46] Stratum detected new block [2014-03-07 10:30:46] thread 1: 21648 hashes, 4.94 khash/s [2014-03-07 10:30:46] thread 0: 21180 hashes, 4.82 khash/s I will try the gridseed miner soon.

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 01:08:53 AM

Quote from: Anonymailer on March 06, 2014, 07:52:26 PM Could you try the CPU miner set to litecoin and see whether that works please? I need to recompile the cgminer and cpuminer for this as gridseed have updated their versions, hopefully we'll have better luck with that! Hi, Try CPU Miner and set to litecoin and it did not work. Encounter this. dyld: Library not loaded: /usr/local/lib/libidn.11.dylib Referenced from: /Users/*/Documents/Temproray/MacMiner.app/Contents/Resources/gridseedcpu/bin/minerd Reason: image not found

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 07, 2014, 12:47:09 AM

Quote from: Anonymailer on March 06, 2014, 08:10:54 PM I've updated to the gridseed-cgminer-3.8.5 http://downloads.fabulouspanda.co.uk/MacMiner-gridseed3.zip Which has significant changes to the driver so worth a shot! Hey, downloaded and running the legacy pool with CG Miner. run into this [2014-03-07 08:44:29] Started cgminer 3.8.5 [2014-03-07 08:44:29] Loaded configuration file /Users//Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 08:44:31] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 08:44:31] No devices detected! [2014-03-07 08:44:31] Waiting for USB hotplug devices or press q to quit [2014-03-07 08:44:31] Probing for an alive pool [2014-03-07 08:44:34] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 08:44:35] Pool 0 difficulty changed to 172.547491 [2014-03-07 08:44:36] Pool 0 difficulty changed to 152.957332 [2014-03-07 08:44:36] Network diff set to 3.81G [2014-03-07 08:44:37] Stratum from pool 0 requested work restart [2014-03-07 08:44:42] API running in IP access mode on port 4048 (24) [2014-03-07 08:44:29] Started cgminer 3.8.5 [2014-03-07 08:44:29] Loaded configuration file /Users//Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 08:44:31] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 08:44:31] No devices detected! [2014-03-07 08:44:31] Waiting for USB hotplug devices or press q to quit [2014-03-07 08:44:31] Probing for an alive pool [2014-03-07 08:44:34] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 08:44:35] Pool 0 difficulty changed to 172.547491 [2014-03-07 08:44:36] Pool 0 difficulty changed to 152.957332 [2014-03-07 08:44:36] Network diff set to 3.81G [2014-03-07 08:44:37] Stratum from pool 0 requested work restart [2014-03-07 08:44:42] API running in IP access mode on port 4048 (24) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 08:44:43] gridseed detect (253:6) failed to initialise (incorrect device?) [2014-03-07 08:44:43] gridseed detect (253:6) failed to initialise (incorrect device?) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 08:44:50] gridseed detect (253:6) failed to initialise (incorrect device?) i did setup the manual flag - --freq=600 --gc3355=/dev/cu.usbmodemfdxxxx

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 06, 2014, 05:16:15 PM

Ok, i was meddling around a bit and i came across the fabulous panda pool option and i went ahead to give it a go. and it somehow sprung to life! Still not getting any work done though.. LOL here's the log: [2014-03-07 01:13:47] Started cgminer 3.5.0 [2014-03-07 01:13:47] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 01:13:47] [1;32mDetected Btc devices total: 0[0m [2014-03-07 01:13:47] No devices detected! [2014-03-07 01:13:47] Waiting for USB hotplug devices or press q to quit [2014-03-07 01:13:47] Probing for an alive pool [2014-03-07 01:13:50] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 01:13:52] Pool 0 difficulty changed to 165.918801 [2014-03-07 01:13:52] Network diff set to 3.81G [2014-03-07 01:13:52] Stratum from pool 0 detected new block [2014-03-07 01:13:53] Stratum from pool 0 requested work restart [2014-03-07 01:13:57] API running in IP access mode on port 4048 (26) [2014-03-07 01:13:47] Started cgminer 3.5.0 [2014-03-07 01:13:47] Loaded configuration file /Users/ericwong/Library/Application Support/MacMiner/bfgurls.conf [2014-03-07 01:13:47] [1;32mDetected Btc devices total: 0[0m [2014-03-07 01:13:47] No devices detected! [2014-03-07 01:13:47] Waiting for USB hotplug devices or press q to quit [2014-03-07 01:13:47] Probing for an alive pool [2014-03-07 01:13:50] Switching pool 0 http://pool.fabulouspanda.co.uk:9332 to stratum+tcp://pool.fabulouspanda.co.uk:9332 [2014-03-07 01:13:52] Pool 0 difficulty changed to 165.918801 [2014-03-07 01:13:52] Network diff set to 3.81G [2014-03-07 01:13:52] Stratum from pool 0 detected new block [2014-03-07 01:13:53] Stratum from pool 0 requested work restart [2014-03-07 01:13:57] API running in IP access mode on port 4048 (26) (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 01:14:09] Pool 0 difficulty changed to 139.219060 [2014-03-07 01:14:09] Stratum from pool 0 requested work restart [2014-03-07 01:14:09] Pool 0 difficulty changed to 139.219060 [2014-03-07 01:14:09] Stratum from pool 0 requested work restart (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 01:14:18] Pool 0 difficulty changed to 123.948074 [2014-03-07 01:14:19] Stratum from pool 0 requested work restart [2014-03-07 01:14:18] Pool 0 difficulty changed to 123.948074 [2014-03-07 01:14:19] Stratum from pool 0 requested work restart (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 01:15:27] Pool 0 difficulty changed to 193.639545 [2014-03-07 01:15:27] Stratum from pool 0 requested work restart [2014-03-07 01:15:27] Pool 0 difficulty changed to 193.639545 [2014-03-07 01:15:27] Stratum from pool 0 requested work restart (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m [2014-03-07 01:15:32] Pool 0 difficulty changed to 169.857820 [2014-03-07 01:15:32] Stratum from pool 0 requested work restart [2014-03-07 01:15:32] Pool 0 difficulty changed to 169.857820 [2014-03-07 01:15:32] Stratum from pool 0 requested work restart (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m (5s):0.000 (avg):0.000h/s \| A:0 R:0 HW:0 WU:0.0/m

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 06, 2014, 05:06:15 PM

Hi Anonymailer, Deleting the folder did the trick, i am able to start macminer again. After entering my pool information and password, i started CG Miner and encounter the following: 2014-03-07 01:03:12] /Users//Documents/Temproray/MacMiner.app/Contents/Resources/gridcgminer3.5/bin/cgminer: -c: JSON decode of file '/Users//Library/Application Support/MacMiner/bfgurls.conf' failed unable to open /Users//Library/Application Support/MacMiner/bfgurls.conf: No such file or directory [2014-03-07 01:03:12] /Users//Documents/Temproray/MacMiner.app/Contents/Resources/gridcgminer3.5/bin/cgminer: -c: JSON decode of file '/Users//Library/Application Support/MacMiner/bfgurls.conf' failed unable to open /Users//Library/Application Support/MacMiner/bfgurls.conf: No such file or directory Did i miss any steps?

Alternate cryptocurrencies / Mining (Altcoins) / Re: The official MacMiner thread [BTC/LTC-CPU/GPU/FPGA/ASIC]

on: March 06, 2014, 04:04:30 PM

Quote from: Anonymailer on March 06, 2014, 03:32:35 PM Thanks guys! The bfgminer update wasn't for the 5 chip devices unfortunately, but looking into things I think the cpuminer and cgminer I compiled for gridseed devices actually requires the same ftdi driver bfgminer does, unusually, so those may work with the bfgminer driver setup as opposed to the standard cgminer setup. OK, as i said earlier, i am totally new to this... so as expected, i encounter my first issue... For the record, i am running OSX 10.9.1 VCP driver installed successfully from here - http://www.ftdichip.com/Drivers/VCP.htm After installing the driver and running ls -l /dev/cu.* I noticed a new device was detected - crw-rw-rw- 1 root wheel 18, 11 Mar 6 23:48 /dev/cu.usbmodemfd1421 I am not sure whether this is the grid seed 5 miner.. but anyway, i did a test when i plug out the USB cable, it disappear.. so it must be it. Then I downloaded the macminer here - http://downloads.fabulouspanda.co.uk/MacMiner-gridseed2.zip I went out and sign up a new pool from https://www.wemineltc.com and enter the following pool setting: stratum+tcp://hk2.wemineltc.com:3336 Not sure what is the username/password, so i left it empty. And right after i saved, the FPGA window pop-up along with some error messages which i failed to copy down.. and then i panic.. basically i went on and start EVERY miner... and this went bad... I can't quit the program and i have to force quite the macminer... then when i tried to start it... i got the "MacMiner Quit Unexpectedly" window Process: MacMiner [4575] Path: /Users/USER/Documents/*/MacMiner.app/Contents/MacOS/MacMiner Identifier: com.fabulouspanda.macminer Version: 1.5.19gridseed2 (1519gridseed2) Code Type: X86-64 (Native) Parent Process: launchd [203] Responsible: MacMiner [4575] What do i need to do now?

Pages: [1] 2 »