 Show Posts
|
|
Pages: [1]
|
does this miner work on 13.12 amd drivers ? my miner instacloses when i run it,i have r9 290 tri-x...
del *.bin
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
COLOR 0A
sgminer.exe --pool-algorithm bitblock -o stratum+tcp://******** -p x -u x --gpu-platform 1 -w 128 --lookup-gap 2 --thread-concurrency 20481 --xintensity 512 --gpu-engine 1040 --gpu-memclock 1300 --gpu-powertune 20 --auto-fan
any ideas ?
Remove all this " --gpu-platform 1 -w 128 --lookup-gap 2" thx man its working  im getting 2300kh/s w my r9 290 tri-x,is that good?can i get more? very bad, 290 (non x) is 3000kh/s instal 14.6 drivers the same here, I have only 2.8MH on r9 290 and 14.6 driver installed, is that because I have only 2GB system ram ? What has ram to do with computations on gpu ... |
|
|
|
My x15 sgminer was forked on sgminer-dev already :
https://github.com/sgminer-dev/sgminer/tree/v5_0-x15
Check out the lasted optimized win32 binary :
https://mega.co.nz/#!5FMEjBhZ!fvRKSBXpCehZIg9wQKCnCVO84Ow6QLnCFZDdUHqBoAQ
There also a "bitblockold" kernel working with older GPUs (78xx, 68xx ...)
Expecting hash rate on 14.6 driver :
270X : 1.85MH/s (1100/1400 engine/mem)
7950 : 2.4MH/s (1050/1250 engine/mem) (mine was undervoltage / can't push engine clock too hard)
280X : 2.9MH/s (1100/1400 engine/mem)
there's 3 batch file for 7950, 270x and 280x and 3 binary kernel if you don't want to upgrade to 14.6, but hash rate would be 5% slower compared to 14.6 driver, just update your pool, worker, password and run do you have file for r9 290?? 404 page not found: https://github.com/sgminer-dev/sgminer/tree/v5_0-x15and when I tried copy over bitblock.cl in sgminer_v5 -> compilation error |
|
|
|
I can't get more than 4.5 on r9 290 ... but some people report 5.1 ... and on 7950 I get 3.8 is someone having more on 7950 ? |
|
|
|
Hi,
I get only 3.2Mh, but i have 290x
My settings:
"kernel" : "x11mod",
"xintensity" : "50",
"worksize" : "64",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"gpu-threads" : "2",
"gpu-engine" : "1000",
"gpu-memclock" : "1500",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"shaders" : "2816",
"temp-target" : "70",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-hysteresis" : "3",
"api-allow" : "W:127.0.0.1,W:172.17.0.0/20",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "60",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Did you forget to put the modified cl files from coolers post ? I copied coolers kernel x11mod.cl into kernel directory of sgminer_v5 ... renamed darkcoin-mod.cl (because it always used darkcoin-mod) and I get: Unable to open darkcoin-mod.cl for reading! ok so I copied x11mod.cl over darkcoin-mod.cl and I get : Error -46: Creating Kernel from program. (clCreateKernel) Is that modified kernel x11mod.cl from cooler usable on sgminer_v5 ? Or what else should I try ? cd /home/andrej/bin/cryptoc/sgminer_v5/sgminer/ rm *.bin eval screen $SCREENPARAMS cgm0_$COIN0 /home/andrej/bin/cryptoc/sgminer_v5/sgminer/sgminer \ --url \$$COIN0 \ --userpass xxx:xxx \ --kernel x11mod \ --thread-concurrency 8192,8192,8192 \ --xintensity 40,63,63 \ --worksize 64,64,64 \ --lookup-gap 2 \ --gpu-powertune 50,20,20 \ --gpu-threads 2 \ --gpu-engine 947,1130,1124 \ --gpu-memclock 1350,1500,1570 \ --gpu-fan 68,58,58 \ --temp-cutoff 85,85,85 \ --temp-overheat 80,80,80 \ --api-network \ --api-listen \ --api-allow W:127.0.0.1 \ --api-port $GPU0PORT \ --no-submit-stale \ you need to modify the kernels yourself or download the miner from the OP. You have to use a x11mod capable miner to use those kernels. sgminer 5 users darkcoinmod which is different. You can modify the kernels yourself more information in a link posted here: http://redd.it/29mzytEDIT: I just uploaded the sgminer5kernels.. will add them to the reddit post. Not able to test them at the moment but theres no reason they shouldn't work. https://mega.co.nz/#!xZMCzRJa!bHfMKm-X75qXZFVKAB0QgK5zoRWEh3JVZAd7e_qfWlY Let me know if you have issues you can always check the post if youd prefer to do it yourself I tried but getting only 4.5MH, and when I changed also that macro #define SPH_T32(x) computer freezed ... is it possible to change that macro in your kernel source ? SPH_T32(((x) << (n)) | ((x) >> (32 - (n)))) |
|
|
|
GIVE ME A HELP: 
I used my .bat to trigger my sgminer, here it is :
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
timeout /t 30
sgminer.exe --kernel x11mod -c sgminer.conf and my sgminer.conf is : {
"pools" : [
{
"url" : "stratum+tcp://sea.wafflepool.com:3331",
"user" : "19RLsfsfAZwi31TsqRX8PLDasfasdfsPpd5Qerre",
"pass" : "0.008"
}
]
,
"kernel" : "x11mod",
"intensity" : "0",
"xintensity" : "50",
"rawintensity" : "0",
"worksize" : "64",
"gpu-threads" : "2",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-engine" : "1000-1000",
"gpu-memclock" : "1200",
"gpu-fan" : "50-60",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1"but i got this: fatal JSON error in configuration file. configuration file could not be used. need to specify at least one pool server. input server details. URL: What's wrong with this, help!![/color] missing bracket } at the end ? maybe |
|
|
|
Hi,
I get only 3.2Mh, but i have 290x
My settings:
"kernel" : "x11mod",
"xintensity" : "50",
"worksize" : "64",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"gpu-threads" : "2",
"gpu-engine" : "1000",
"gpu-memclock" : "1500",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"shaders" : "2816",
"temp-target" : "70",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-hysteresis" : "3",
"api-allow" : "W:127.0.0.1,W:172.17.0.0/20",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "60",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Did you forget to put the modified cl files from coolers post ? I copied coolers kernel x11mod.cl into kernel directory of sgminer_v5 ... renamed darkcoin-mod.cl (because it always used darkcoin-mod) and I get: Unable to open darkcoin-mod.cl for reading! ok so I copied x11mod.cl over darkcoin-mod.cl and I get : Error -46: Creating Kernel from program. (clCreateKernel) Is that modified kernel x11mod.cl from cooler usable on sgminer_v5 ? Or what else should I try ? cd /home/andrej/bin/cryptoc/sgminer_v5/sgminer/ rm *.bin eval screen $SCREENPARAMS cgm0_$COIN0 /home/andrej/bin/cryptoc/sgminer_v5/sgminer/sgminer \ --url \$$COIN0 \ --userpass xxx:xxx \ --kernel x11mod \ --thread-concurrency 8192,8192,8192 \ --xintensity 40,63,63 \ --worksize 64,64,64 \ --lookup-gap 2 \ --gpu-powertune 50,20,20 \ --gpu-threads 2 \ --gpu-engine 947,1130,1124 \ --gpu-memclock 1350,1500,1570 \ --gpu-fan 68,58,58 \ --temp-cutoff 85,85,85 \ --temp-overheat 80,80,80 \ --api-network \ --api-listen \ --api-allow W:127.0.0.1 \ --api-port $GPU0PORT \ --no-submit-stale \ |
|
|
|
Any help for 290 config file ?
X11 / X13 ?
Please share...
Sharing IS caring...
I'm sure it's not best configs, but they work stable for me R9 290, AMD v14.6rc2 + AB for UV, sgminer v4.1.0
| ~5.1 Mh, t < 80 deg (gpu uv)
"kernel" : "x11mod",
"intensity" : "0",
"xintensity" : "50",
"rawintensity" : "0",
"worksize" : "64",
"gpu-threads" : "2",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-engine" : "1000-1000",
"gpu-memclock" : "1200",
"gpu-fan" : "50-60",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1"
|
| ~3.6 Mh, t < 80 deg (gpu uv)
"kernel" : "x13mod",
"intensity" : "17",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "64",
"gpu-threads" : "2",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-engine" : "1000-1000",
"gpu-memclock" : "1200",
"gpu-fan" : "60-60",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-port" : "4028",
"api-mcast-port" : "4028",
"api-allow" : "W:127.0.0.1"
| this is most important for speed and stability
for fine tuning
<---
<---
<---
<---
<---
|
hope it will help  is that R9 290X or R9 290 ? because I have only 4.4 MHash on R9 290 ... |
|
|
|
|
Reputation Thread for Leasing my rigs out on Leaserig.net. Looking to start leasing my 6.2M X11 rig.
|
|
|
|
|
