Show Posts
Hi,
Need some guidance. I have Rigs with RX580 - bios moded.
I was mining Cryptonight algo - Tube for quite some time. My rigs were with Blockchain AMD drivers and SRBMiner 1.7.3 - I have very small problems with rigs, from some time the miner software crashes but is something like once in a 2-3 days. I just restart the miner software and continue to mine for another 2-3 days. When it crashes my rig is ~140 W till i restart it. SRBRestarter does not work for some reason probably because see that the process is ON /crashed but is not absent /
I decided to upgrade the miner with the last version first without changing the drivers. And all the problems started every night at about the same time all rigs stop sending to the pool but they continue to draw full power from the wall .
I tried to set --minrigspeed but the miner works at full power just not submitting to the pool so the string does not work for me /pool is https://bittube.miner.rocks/
Then I changed the drivers with 18.5.1 but without luck - the problem stays. It works for most of the day but then stops submitting to the pool and continues to draw full power from the wall /and not 140w like with 1.7.3/
Current setup is
SRB Miner 1.9.3
Afterburner 4.5.0
AMD Driver 18.5.1
Screenshot https://pasteboard.co/IrsHrzW.png
Need some guidance. I have Rigs with RX580 - bios moded.
I was mining Cryptonight algo - Tube for quite some time. My rigs were with Blockchain AMD drivers and SRBMiner 1.7.3 - I have very small problems with rigs, from some time the miner software crashes but is something like once in a 2-3 days. I just restart the miner software and continue to mine for another 2-3 days. When it crashes my rig is ~140 W till i restart it. SRBRestarter does not work for some reason probably because see that the process is ON /crashed but is not absent /
I decided to upgrade the miner with the last version first without changing the drivers. And all the problems started every night at about the same time all rigs stop sending to the pool but they continue to draw full power from the wall .
I tried to set --minrigspeed but the miner works at full power just not submitting to the pool so the string does not work for me /pool is https://bittube.miner.rocks/
Then I changed the drivers with 18.5.1 but without luck - the problem stays. It works for most of the day but then stops submitting to the pool and continues to draw full power from the wall /and not 140w like with 1.7.3/
Current setup is
SRB Miner 1.9.3
Afterburner 4.5.0
AMD Driver 18.5.1
Screenshot https://pasteboard.co/IrsHrzW.png
Also have similar problem. Use to be 24/7 stable ~0.1% HW errors.
Been mining TUBE on and off so I can't figure out exactly when the problem started but I think after SRBMiner v1.8.8.
Happens after 1-3 days of mining, then all of a sudden starts spitting out 100% HW errors, continues retrieving jobs from pool but doesn't restart.
Current setup:
5x Vega 56s (no bios mod)
AMD drivers 18.6.1
SRB Miner v1.9.3 (Run through AwesomeMiner + Remote Agent if that makes a difference, although never used to be a problem)
Parameters: --ccryptonighttype bittubev2 --cgpuid 0,1,2,3,4 --cgpuintensity 56,56,56,56,56 --cgpuworksize 8,8,8,8,8 --cgputhreads 2,2,2,2,2 --cgpufragments 1,1,1,1,1 --cgputweakprofile 5L,10L,10L,2,9L --cgpuheavymode 2,2,2,1,2 --resetvega --enablegpurampup --nobinaries --preparedata
Still trying to figure it out with low clocks ~900mhz atm but still same problem.
--nobinaries doesn't help.
The strange thing is that I have 4 rigs and they start almost at the same time at night around 6.30 AM - like something triggers them at this time /they are not in the same room and different power supply/electric phase - I have 3 phase electricity option and put rigs at different to distribute the load /.
I made little test - returned 3 of the rigs to 1.7.3 and they are working from 2 days but the 4th is with 1.9.3 and 18.5.1 and today again at 6.45 AM started to give errors
