Hello, my name is jared I’m new this website and a little new to mining. I recently purchased an Asus b250 mining expert 19 slot motherboard as my first mining rig. I have a 2000 watt psu to begin with, it runs one 24 pin and 8 pin power supply . I have an i3 processor . With 2 8 gb ram chips, and 16 x pci extensions . I amtrying to run my first Radeon 580 duel fan gpu .
Let me know if I forgot to mention anything but I gotta 16 x card case with 120mm fan also on it, my issues go further then this though I got all the pieces together last week, and was so excited to get her started up , unfortunately I did forget a power button and did not try to jump it as I didn’t want to ruin anything to soon. Regardless, I got the button in a few day later and went to try my first rig, and....nothing. Nothing even made a click or a tick, there was no sign of anything working. So initially I thought it was the psu, so I found out how to test it by jumping the power, and that worked just fine. The fans ran and the power started . At the time I figured it was maybe the motherboard so I put a different one to power and it started right up. So I got a new motherboard today and , same thing, nothing. So I jumped the psu from the back of the plug while still plugged into the motherboard and finally I got the whole motherboard to power up. Well most of it. I have a red light on the pci extension and connector for the gpu , but no power, no fans on the gpu are spinning, and no video display for either the motherboard hdmi output or the video gpu output. Please hellppp
|