Hello guys. Slowly selling some rackable gear. In stock are 4U chassis-cases for gpu mining. Made in EU, limited quantity for 'ourselves' and approx 20 pcs here in hand -never used. https://s.put.re/co7KRAZF.jpghttps://s.put.re/TV9PX9R2.jpghttps://s.put.re/tRCDnQW9.jpgcase dimensions: 700 x 445 x 170 mm (D x W x H) for 6 x gpu whole piece with detachable top cover preinstalled 33 x 8mm standoffs for risers and mobo mount for atx psu and 2.5'' hdd +50 screws (m3) power-on and reset buttons 3 x sunnon fans 150cfm each, sata connector 3 x 120mm fan grills 2 x L-shaped rails for the rack (to slide in) rails: distance 565 mm between mounting holes weight with fans and rails: approx 15kg This is a minimum chassis setup, in stock ready for shipment. It's also possible to preinstall mobo/cpu/risers, all parts new with warranty https://s.put.re/C363tMjE.jpgFor a 'core version', to make it cheap, bare metal case not painted, without fans/screws/standoffs: PM Shipping: from .ee to EU countries. For members with good trust I ship the gear before payment. Payment: crypto or sepa transfer, can provide invoice. Escrow is accepted at buyer's expense. |
|
|
|
|
What about ASTEC AA2390L (2800w) ? Though it has ridiculos pinout. Should be working, last used 2 years ago. Asking 60£ equiv plus shipping.
|
|
|
|
they cannot sell a 3 month warranty product in EU either, where a minimum warranty should be 2 years.
Yes they can sell in EU, with 3 months warranty, but only to a legal entity. I just received an email from big supplier, offering stock of 100+ pcs What do you guys think about the price, to make it worth buying? What is a good fair deal for ZOTAC P104-100 4GB GDDR5X Mining (3 Months Warranty)? |
|
|
|
80x PCIE-Riser v0.7
Are these powered by sata, molex or 6-pin connector? Also, it would be good to hear about USB cable length  |
|
|
|
Gigabyte 280x with elpida onboard is giving me stable 13.5 sols. I did nothing besides unpacking and launching the miner ))
I have no idea how you managed to get 13.5sols. The most I could get was 11.50 with some heavy overclocking. Just use ancient drivers, I am still on 13.12 with my Tahities and feeling good  I have tested the shittiest card with lowest ASIC quality and the slowest hashrate on ALL algos. Got the results on 1050/1500@1.094v btw |
|
|
|
|
Gigabyte 280x with elpida onboard is giving me stable 13.5 sols. I did nothing besides unpacking and launching the miner ))
|
|
|
|
I have rx480, windows non-whql-16.9.1-Sep7 driver and nicehash 5.5.0
Did anyone manage to accomplish such simple thing as: sgminer --gpu-fan 50
I was also unable to set clocks and voltage with this. Is it supported?
Look Here https://bitcointalk.org/index.php?topic=1630513.0Well, thanks. However, I am still looking for neat command line utility, capable of setting fans, clocks and voltages. Sgminer worked like a charm with R9 2xx cards, I really liked that and kinda got used to it. So is there a fork of sg/cg/whatever miner, that supports calls to the driver of Polaris' cards? |
|
|
|
|
I have rx480, windows non-whql-16.9.1-Sep7 driver and nicehash 5.5.0
Did anyone manage to accomplish such simple thing as: sgminer --gpu-fan 50
I was also unable to set clocks and voltage with this. Is it supported?
|
|
|
|
I haven't checked this thread for a while, but after reading just ONE last page -- this is ridiculously awesome! Payment processor, monerodo OS which I am downloading right now -- that's a huge progress, thank you guys for your hard work! And here comes the Le Monde article, right in time  |
|
|
|
Hi Claymore, Since you are about to start updating the code, maybe you could add Karbowanec support at once. Shouldn't be much of a coding I guess, everything concerning KRB can be found in this thread - https://bitcointalk.org/index.php?topic=1491747Best regards & thank you in advance. |
|
|
|
Пока не будет признано существование эфира
В советских учебниках по физике про эфир было, до какого-то года. Потом убрали |
|
|
|
I hear several algos break pretty bad on Tonga cards - which there are quite a few of, now. 285, 380, 380X...
What do you mean by that? Certain algo optimizations for Tonga aren't giving expected results? If so  I have few Tongas, but haven't played with them enough. Couldn't start the optimized win-32-bit shit at all, on stock 64-bit sgminer Tonga hashes way slower comparing to Tahiti ... although temps rarely exceed 50 degrees |
|
|
|
|
С одного процессора Интел Q9550 (или i3 средней паршивости) получается 0.05 монет в сутки. Это грубо говоря 5 американских копеек или 3.5 рубля. Чтобы намайнить 70 рублей нужно 20 "более-менее" процов или 2-3 мощных серверных. Как-то так
|
|
|
|
Это сколько получается в день намайнить? А то может мне на Монеру переключиться с Магикоина.
С одного процессора получается досвидания. С нескольких - ну как вам сказать )) Если калькулятор не катит, то переключите хотя бы на сутки свою процессорную мощу на монеру и сравните с магикойном |
|
|
|
как работает метод анонимизации транзакций основанный на кольцевых подписях?
Транзакция не подписывается человеком - собственником кошелька. Для каждой сделки генерируется одноразовая групповая подпись, и хз кто зачинщик  хорошая статья на русском кстати - http://bits.media/cryptonote/ |
|
|
|
Доброго времени суток. Интересен ли такой майнер сообществу:
Котел-водонагреватель (майнер)...
Готовы ли вы купить майнер дороже, если у него есть второе полезное применение (как в старое доброе время видеокарт)?
Меня несколько месяцев терзала мысль, как бы приступить к разработке чего-то подобного. А у вас ... молодцы!!! Респект и увага. Поделюсь парой мыслишек. Штамповка одинаковых аппаратов может себя не оправдать. Тут нужно подходить индивидуально к каждому клиенту, исходя из его реалий и потребностей. И второй ньюанс - как у вас предусмотрена замена "майнерской" состовляющей, можно ли будет потом без особых усилий выкинуть железо из масляного контейнера и поменять на что-нить "посовременней"? Типа - через год поменял "контроллер" и отапливать стало в 2 раза профитней )) |
|
|
|
|
Show Posts
