 Show Posts
|
|
Pages: [1]
|
Dear dev,
I really look forward to the function of the failover pools in pools.txt file!
You can set failover pools by repeating "-o" parameter for each pool: -o <primary_pool_url> -o <failover_pool1_url> -o <failover_pool2_url> -o <failover_pool3_url> Hello. I am aware of this possibility. But I would like to have this functionality in a separate file with backing pools.txt, like Claymore did! Hi, apart from development effort this would require some extra design work as we'd be introducing another way of passing pool URLs to the miner and need to figure out what takes precedence when and so on. I may put this on my todo list but I'm afraid it'll be low priority for now. Thanks for understanding. Hello! Please answer, they are asking you! But it seems to me that you don't want to answer questions. Therefore, here I see only insults from other participants. Please tell me, so will you make this function? In fact, many people need it. After that, we will add your miner. |
|
|
|
I read the forum thread... It does not inspire confidence when developers are rude to the usual questions of forum users... Support 0  The author of the topic is rigelminer and I did not see rudeness in his posts. You can find a link to this topic in the README.md file. Information from the README.md file Support Discord: https://discord.gg/zKTgcGgc6k I am not the developer of this miner, so when I see banal questions, I sometimes swear  It's not hard to guess by looking at your other forum posts that you are the developer of this program (or are in the development group). So yes, it's very convenient to be rude to everyone under the guise of another account. I have been in mining for more than 6 years. I have never seen such a disregard (on forum branches) anywhere! There's just 0 support. Well, even if you are not a developer (which I don't believe), then the developers clearly don't care about their project, since it allows this on its forum thread. Good luck with this attitude  |
|
|
|
I read the forum thread... It does not inspire confidence when developers are rude to the usual questions of forum users... Support 0 |
|
|
|
Please help me! Is this normal???  here the topics are only about the Phoenix program. Go to another branch. From myself, I will say this: this is a very bad indicator!  |
|
|
|
Do I need a tablet for Phoenix Miner for 1080? I can't understand, in Phoenix there is a parameter - straps. If I install it, do I still need to run ohgodethenlargementpill separately? If necessary, please tell me what is your hashrate for 1080 and what are the overclocking parameters and what are the Phoenix parameters? PS. Gigabyte Gaming 1080 card  |
|
|
|
tell me what the problem may be I run the miner (Phoenix) on ETH, it works stably: Ubuntu 18.04.05, h110-d3a, g4400 6 cards msi rx 588, drivers 18.20, RAM 8gb, swap file 60gb, the system is on ssd-120gb. The problem is that the miner is constantly stopped due to a memory segmentation error (the memory stack is flushed to disk). I tried different Ubuntu distributions, different driver versions, different versions of Phoenix miner (and other miners!!), different versions of the bios, the problem does not go away, it can work from 3 minutes to 3 days on 1 video card, the system started, and worked stably, but after setting all 6 cards, this error was repeated, I tried to shoot some of the cards, the problem did not go away. Tell me what to do? THNX  |
|
|
|
PhoenixMiner 5.4c (release candidate) is ready. You can download PhoenixMiner 5.4c from here (both Windows and Linux versions): https://mega.nz/folder/DR8ChZCR#vSVph_yXN27g09ge5EqduQ (MEGA) If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvidia cards under Windows): File: PhoenixMiner_5.4c_Windows.zip
===================================
SHA-1: 191f35a6f90c5caa9c95813a1b1737e642f73c67
SHA-256: 4599daac32507079c96d43ed0f401c09a0d362a59dd7aa828bc8203148f3d193
SHA-512: 0ed90d35cbe5d04f2c0a0717b1d5f199a79e281b2590687d2448867f3c8fbceb7062c85833653f9c879c6d7b254460eb3f8bcda89f9aa9892a738bc850fdb72a
File: PhoenixMiner_5.4c_Linux.tar.gz
====================================
SHA-1: f2341079baacdc75e12c7c8976ab25acaa3acaaa
SHA-256: da3801a37d561bde30bc2b2083310bc2f3e8b2ea674fa0555e3af5d90e3ade2c
SHA-512: 265db5f014bbfce03bfbc15d8cfbf255903b95f7232f1a9d50a90bae9f49c40786c3644210f4fbad88180c23ab8f7a9937dcc4b63dd53b437522dde5f2ff722f
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The changes in this release (since 5.4b) include the following: - Added support for DAG epochs up to 500
- Fixed crash (or GPUs not detected error) when using the latest Windows Nvidia drivers 460.79 and 460.89
- Validated support for Nvidia RTX 3090, 3080, 3070, and 3060Ti GPUs. Those still use the current kernels and there are no speed increases from the previous PhoenixMiner release
- Add support for the older AMD Linux driver 19.50-1011208-ubuntu-18.04 (used by some Linux mining OSes and other software)
- Added new kernels to allow mining on AMD Hawaii cards (R9 390, etc.) with the current and future DAG epochs (even with DAG buffer above 4GB for the 8GB cards). Note that the AMD Windows drivers do not support compute mode for Hawaii cards, so the hashrate will be quite low (14-15 MH/s with the current ETH DAG epoch). This problem is fixed under Linux, where you can get the full 29-30 MH/s speed out of the Hawaii cards.
The changes of the previous beta (5.4b) since the last version (5.3b) are: - New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
- Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
- Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
- Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
- Other small fixes and improvements
Some notes on the best (or at least some of the better) drivers for AMD cards: - If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
- If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
- Avoid using the 20.40.x, and 20.45.x drivers under Linux.
Please let us know if you have any problems or questions related to PhoenixMiner 5.4c Phoenix, thank you for the new version. So far it works stably |
|
|
|
how to use PhoenixMiner command in ethOS |
|
|
|
Hi! I want to buy ASIC under Ethereum. I only mined on the GPU. Question does ASIC already have the program sewn in? Or will Phoenix need to be specially configured for ASIC? Thanks! |
|
|
|
Question, I look everywhere, but there is no normal answer...
can I immediately specify the exchange's wallet?
Just all the examples indicate Metamask, MEW...
Yes, you can specify the exchange's wallet. But the exchange is not a reliable source of storage. |
|
|
|
|
How glad I am! Now my RX 4 GB got a new life! Thanks ETC!!
|
|
|
|
Hi! Can I mine ETC on RX470 (4GB)?
Yes, on the new algorithm! |
|
|
|
Every of my RX 580 8Gb drop in hashrate by ~3 Mh on epochs over ~380 on 5.1c.
install the latest version. |
|
|
|
|
Hi! Tell me who faced, 1070 with 30 megahashes falls on 20-18 megahashes.
|
|
|
|
Friends! Help! I've spent several days already. AMD 570 (8 GB) can mine Ethereum? Or can't Claymore? I tried it on Windows - it doesn't work. Linux doesn't start either. What is the problem??? help please. ASUS AMD Radeon RX 570 cards  ends at 384 DAG epoch. What does the miner reporting? Post here error logs Have other miners tried it? Are they running? Is the driver running normally? |
|
|
|
|
Has anyone tried 3070? how are they on Ethereum?
|
|
|
|
|
