[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000313] ps7-ttc #0 at df804000, irq=43
[    0.000623] Console: colour dummy device 80x30
[    0.000654] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040211] pid_max: default: 32768 minimum: 301
[    0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040454] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042588] CPU: Testing write buffer coherency: ok
[    0.042919] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042979] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043204] L310 cache controller enabled
[    0.043224] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121035] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210387] CPU: All CPU(s) started in SVC mode.
[    0.211050] devtmpfs: initialized
[    0.213464] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214675] regulator-dummy: no parameters
[    0.221908] NET: Registered protocol family 16
[    0.224147] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226447] cpuidle: using governor ladder
[    0.226460] cpuidle: using governor menu
[    0.233870] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235398] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235411] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235525] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257202] bio: create slab <bio-0> at 0
[    0.258632] vgaarb: loaded
[    0.259328] SCSI subsystem initialized
[    0.260970] usbcore: registered new interface driver usbfs
[    0.261341] usbcore: registered new interface driver hub
[    0.261579] usbcore: registered new device driver usb
[    0.262104] media: Linux media interface: v0.10
[    0.262261] Linux video capture interface: v2.00
[    0.262506] pps_core: LinuxPPS API ver. 1 registered
[    0.262518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262639] PTP clock support registered
[    0.262999] EDAC MC: Ver: 3.0.0
[    0.264027] Advanced Linux Sound Architecture Driver Initialized.
[    0.266872] DMA-API: preallocated 4096 debug entries
[    0.266887] DMA-API: debugging enabled by kernel config
[    0.266959] Switched to clocksource arm_global_timer
[    0.287021] NET: Registered protocol family 2
[    0.287692] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287750] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287835] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287879] TCP: reno registered
[    0.287896] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287929] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288166] NET: Registered protocol family 1
[    0.288510] RPC: Registered named UNIX socket transport module.
[    0.288522] RPC: Registered udp transport module.
[    0.288531] RPC: Registered tcp transport module.
[    0.288539] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288552] PCI: CLS 0 bytes, default 64
[    0.288996] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291034] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293167] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293359] msgmni has been set to 967
[    0.294138] io scheduler noop registered
[    0.294151] io scheduler deadline registered
[    0.294195] io scheduler cfq registered (default)
[    0.308357] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308378] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431337] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.999132] console [ttyPS0] enabled
[    1.003412] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.011035] [drm] Initialized drm 1.1.0 20060810
[    1.028143] brd: module loaded
[    1.037479] loop: module loaded
[    1.046839] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052712] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060776] libphy: XEMACPS mii bus: probed
[    1.065144] ------------- phy_id = 0x3625e62
[    1.070191] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085450] ehci-pci: EHCI PCI platform driver
[    1.092688] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099524] usbcore: registered new interface driver usb-storage
[    1.106385] mousedev: PS/2 mouse device common for all mice
[    1.112535] i2c /dev entries driver
[    1.119538] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.125020] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130924] Xilinx Zynq CpuIdle Driver started
[    1.135764] sdhci: Secure Digital Host Controller Interface driver
[    1.141936] sdhci: Copyright(c) Pierre Ossman
[    1.146206] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.153058] mmc0: no vqmmc regulator found
[    1.157097] mmc0: no vmmc regulator found
[    1.196976] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205671] usbcore: registered new interface driver usbhid
[    1.211182] usbhid: USB HID core driver
[    1.215900] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222195] nand: Micron MT29F2G08ABAEAWP
[    1.226160] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232111] Bad block table found at page 131008, version 0x01
[    1.238337] Bad block table found at page 130944, version 0x01
[    1.244387] 3 ofpart partitions found on MTD device pl353-nand
[    1.250169] Creating 3 MTD partitions on "pl353-nand":
[    1.255264] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263322] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270648] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279614] TCP: cubic registered
[    1.282850] NET: Registered protocol family 17
[    1.287562] Registering SWP/SWPB emulation handler
[    1.293430] regulator-dummy: disabling
[    1.297771] UBI: attaching mtd1 to ubi0
[    1.822731] UBI: scanning is finished
[    1.834344] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.841426] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.848187] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.854851] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.861729] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.867710] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.874817] UBI: max/mean erase counter: 28/16, WL threshold: 4096, image sequence number: 1105122292
[    1.884034] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.893251] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.893257] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.897222] ALSA device list:
[    1.897225]   No soundcards found.
[    1.913591] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.942686] UBIFS: recovery needed
[    2.021432] UBIFS: recovery completed
[    2.025105] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.031058] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.040162] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.050085] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.055080] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3B7239D8-21A7-4628-8BEE-5D1CF3D22D35, small LPT model
[    2.066381] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.073800] devtmpfs: mounted
[    2.076901] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.917826] random: dd urandom read with 0 bits of entropy available
[    3.307004] 
[    3.307004] bcm54xx_config_init
[    3.917009] 
[    3.917009] bcm54xx_config_init
[    7.917827] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.923936] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.601391] In axi fpga driver!
[   25.604462] request_mem_region OK!
[   25.607886] AXI fpga dev virtual address is 0xdf9fc000
[   25.612960] *base_vir_addr = 0x8c510
[   25.628043] In fpga mem driver!
[   25.631224] request_mem_region OK!
[   25.634786] fpga mem virtual address is 0xe2000000
[   26.426378] 
[   26.426378] bcm54xx_config_init
[   27.056329] 
[   27.056329] bcm54xx_config_init
[   31.056763] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   31.062871] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13927: log_level = 4
main.c:13954: This is XILINX board. Totalram:       507527168
main.c:13966: Detect 512MB control board of XILINX
driver-bitmain.c:1003: forceFreq=-1 forceFlag=0
main.c:8434: DETECT HW version=0008c510
main.c:13999: miner ID : 8058ec0005904814
main.c:14024: Miner Type = S9
main.c:14036: AsicType = 1387
main.c:14039: real AsicNum = 63
main.c:13591: Find /tmp/searcherror: F:1  The last log is below:
main.c:13927: log_level = 4
main.c:13954: This is XILINX board. Totalram:       507527168
main.c:13966: Detect 512MB control board of XILINX
driver-bitmain.c:1003: forceFreq=-1 forceFlag=0
main.c:8434: DETECT HW version=0008c510
main.c:13999: miner ID : 8058ec0005904814
main.c:14024: Miner Type = S9
main.c:14036: AsicType = 1387
main.c:14039: real AsicNum = 63
main.c:14132: use critical mode to search freq...
driver-bitmain.c:2401: get PLUG ON=0x000000e0
driver-bitmain.c:2471: Find hashboard on Chain[5]
driver-bitmain.c:2471: Find hashboard on Chain[6]
driver-bitmain.c:2471: Find hashboard on Chain[7]
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
main.c:2164: Check chain[5] PIC fw version=0x03
main.c:2164: Check chain[6] PIC fw version=0x03
main.c:2164: Check chain[7] PIC fw version=0x03
main.c:8799: read pic freq and badcore num...
main.c:8820: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8862: has freq in PIC, will disable freq setting.
main.c:8961: chain[5] has freq in PIC and will jump over...
main.c:8965: Chain[5] has core num in PIC
main.c:2164: Check chain[5] PIC fw version=0x03
main.c:8799: read pic freq and badcore num...
main.c:8820: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8862: has freq in PIC, will disable freq setting.
main.c:8961: chain[6] has freq in PIC and will jump over...
main.c:8965: Chain[6] has core num in PIC
main.c:2164: Check chain[6] PIC fw version=0x03
main.c:8799: read pic freq and badcore num...
main.c:8820: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8862: has freq in PIC, will disable freq setting.
main.c:8961: chain[7] has freq in PIC and will jump over...
main.c:8965: Chain[7] has core num in PIC
main.c:8975: Chain[7] ASIC[28] has core num=4
main.c:2164: Check chain[7] PIC fw version=0x03
main.c:9039: get PIC voltage=142 on chain[5], value=860
main.c:9039: get PIC voltage=142 on chain[6], value=860
main.c:9039: get PIC voltage=142 on chain[7], value=860
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9205: chain[5] temp offset record: 62,0,0,0,0,0,37,28
main.c:9222: chain[5] temp chip I2C addr=0x98
main.c:9228: chain[5] has no middle temp, use special fix mode.
main.c:9205: chain[6] temp offset record: 62,0,0,0,0,0,37,28
main.c:9222: chain[6] temp chip I2C addr=0x98
main.c:9228: chain[6] has no middle temp, use special fix mode.
main.c:9205: chain[7] temp offset record: 62,0,0,0,0,0,37,28
main.c:9222: chain[7] temp chip I2C addr=0x98
main.c:9228: chain[7] has no middle temp, use special fix mode.
main.c:13838: total_exist_chain_num = 3
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9456: CRC error counter=0
main.c:9471: set command mode to VIL
main.c:9543: 
--- check asic number
main.c:9640: After Get ASIC NUM CRC error counter=0
main.c:9663: set_baud=0
main.c:10588: The min freq=700
main.c:10590: set real timeout 52, need sleep=379392
main.c:12720: After TEST CRC error counter=0
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:14167: search freq for 1 times, completed chain = 3, total chain num = 3 
board_frq_tuning.c:549: single_board_frq_tuning enter
board_frq_tuning.c:550: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:132: force_freq not set, don't need tuning
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:14559: restart Miner chance num=2
main.c:14599: waiting for receive_func to exit!
main.c:14613: waiting for pic heart to exit!
main.c:13809: bmminer not found= 1378 root       0:00 grep bmminer

main.c:14657: bmminer not found, restart bmminer ...
This is the first time running after searching freq!
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 13 10:46:43 CST 2018 type: Antminer S9j
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8058ec0005904814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
driver-btm-c5.c:4965:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:4965:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:4965:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:4965:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:4965:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:4965:check_fan_beforeInit: waiting fans become stable...
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
get fan[5] speed=6120
Fatal Error: some Fan lost or Fan speed low!