 Show Posts
|
|
Pages: [1] 2 »
|
Every time I look at nemos the top coin that it is currently mining says .007-.01 btc/day. My average btc according to zpool stats is only .0027/day. Why such a big gap? My interval is set at 300, should I adjust it?
Sorry that I don't have an answer but you made me curious. Where do you see average BTC on zpool? |
|
|
|
yeah it is an older model, nvidia770 but I've got it to mine skunk before. now its having a hard time mining the x17 algo which I've seen my card run as well...and now skein; although I've never tested that with other mining programs. but yeah all of the same errors. unsupported
this is the bat I used for mine skunk only on zpool and it worked.
ccminer-x64 --algo=skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq
now this is the line this miner uses and says my device isn't supported.
Bin\NVIDIA-skunk\ccminerskunk.exe -a skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq
try ccminer 1.7.6, or 1.8-dev for algos other than skunk which is only going to be in the newest miner apps since its a new algo; If i stil had a 7 series, I would test all the copies I have collected over the years... But for other algos, like X17, skein, etc... try wither of those 2 versions. should be able to find links to them on github or cryptominingblog. Yeah; to test, just make a quick batch file that just launches the miner you are testing; using a very basic batch such as this: mineskein.bat ccminer176.exe -a skein -o stratum+tcp://mine.zpool.ca:4933 -u BTCADDRESS -p c=BTC,skein
pause be sure to replace the btcaddress with your BTC address. Once you find a compatible one; check with minerx on how to integrate it into the powershell scripts. It may be as easy as just replacing the offending miner app itself, naming the new one just like the old one was.... but he will know best. I haven't looked at his scripts much. I know nemosminer right now is using SP_'s pay-for-use/private-build miner app.... the problem with it not working now could be that he switched from the tpruvot version recently... but i am unsure if he originally was serving out the tpruvot version for skunk. *edit* check my bold highlight; it should be '-a' as i've corrected it. your post only had a '-' Yeah I typoed that "-a" earlier. Good eye. I think the best solution would be to point the script to the new miners for the trouble coins but that's pretty far above me without some guidance on where to start. I have been just deleting the trouble algos out of the start.bat and not worrying about it. I hope to upgrade my card soon but this is all hobby stuff for me so no big deal. I appreciate the help from everyone so far! |
|
|
|
yeah it is an older model, nvidia770 but I've got it to mine skunk before. now its having a hard time mining the x17 algo which I've seen my card run as well...and now skein; although I've never tested that with other mining programs. but yeah all of the same errors. unsupported
this is the bat I used for mine skunk only on zpool and it worked.
ccminer-x64 --algo=skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq
now this is the line this miner uses and says my device isn't supported.
Bin\NVIDIA-skunk\ccminerskunk.exe - skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq
try ccminer 1.7.6, or 1.8-dev for algos other than skunk which is only going to be in the newest miner apps since its a new algo; If i stil had a 7 series, I would test all the copies I have collected over the years... But for other algos, like X17, skein, etc... try wither of those 2 versions. should be able to find links to them on github or cryptominingblog. Just so I make sure I understand. You want me to replace the miners the program automatically tried to fire up with older ones to see if it works? sorry if I'm being dense. So I went ahead and replaced some of the versions of ccminer that nemosminer would start with versions I know worked with my card and yeah its mining now! Thanks that was way easier than I had imagined. Well I don't that was a cure all. It switched to sib using one of the ccminers I replaced and it shot off a bunch of low memory errors or something. |
|
|
|
|
yeah it is an older model, nvidia770 but I've got it to mine skunk before. now its having a hard time mining the x17 algo which I've seen my card run as well...and now skein; although I've never tested that with other mining programs. but yeah all of the same errors. unsupported
this is the bat I used for mine skunk only on zpool and it worked.
ccminer-x64 --algo=skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq
now this is the line this miner uses and says my device isn't supported.
Bin\NVIDIA-skunk\ccminerskunk.exe - skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq
|
|
|
|
I can't get the exact details right now as out and about but look for CCMiner for Nvidia mining. It's x11 algo. You can multi-mine and get paid in $PEPE/$MEME or $BTC or whatever using prohashing.com or there is pepe.suprnova.cc but it's in the middle of wallet upgrade at the mo. New pool also being worked on as we speak
I can't get my ccminer to work on supernova but I got it running on prohashing. I only have a 770 right now so there's basically no hashing power. I'm not getting any valid shares so maybe I should keep trying supernova. maye it won't connect due to the wallet changing business you were talking about. |
|
|
|
|
Hey! I haven't mined for coins since dogecoin was released and I am very rusty at this. Is there a good guide for me to start mining this with a Nvidia card? I appreciate the help!
|
|
|
|
When I try to load the Mac wallet I get "sys coin-qt is damaged and can't be opened. you should move it to the trash."
You can't use Chrome or Safari I think. I used Firefox and it's fine (except it won't sync). Thank you! |
|
|
|
|
When I try to load the Mac wallet I get "sys coin-qt is damaged and can't be opened. you should move it to the trash."
|
|
|
|
Voted! Thanks for the link. |
|
|
|
I don't know why but I have a really good feeling about this coin... I'm staying!!!  I've already more than doubled my initial investment so this is a very good coin so far. |
|
|
|
|
That's not a bad amount to be sitting on.
|
|
|
|
hopefully, I wasn't. However, the dev doesn't seem to be a noobs with 4 posts on the forum
That's another reason I got dragged into it :/ |
|
|
|
altcalendar says in 30minutes
Pretty sure this is already over man. Hopefully, if you were in the IPO, you got it back from Kingscrown! |
|
|
|
|
D5x1YTfgGLLgevEPPiiLo4Kk9nsChWASVv so I paid 175k dogecoin to that address. Did that ever get to you?
Edit: I just looked up the address...and it doesn't look like my coins were ever moved out of it.
|
|
|
|
the good news is IPO wont be scam, because im holding it.
so if the dev wont show up.. i have the funds to send them back to u.
Oh freaking awesome news! I was getting a bit worried. im holidn the BTC of the IPO, but if u are person that paid LTC directly to OP - i have no control of that. if u are the BTC inwestor then u can sleep safe  Well that kinda sucks because I paid him in dogecoins. he said he would convert it and it's not labeled as dogecoin so hopefully its BTC. How do we prove who owns which section of the IPO? I have emails and such if you need proof but I'm the 0.2027 BTC. |
|
|
|
the good news is IPO wont be scam, because im holding it.
so if the dev wont show up.. i have the funds to send them back to u.
Oh freaking awesome news! I was getting a bit worried. |
|
|
|
|
Is dev still offline? Maybe it's another IPO scam and a joke because 13coin haha bad luck.
|
|
|
|
only 12h left till IPO end. there is 6 people in right now.  Just need 7 more to get that lucky number |
|
|
|
|
