 Show Posts
|
|
Pages: [1] 2
|
|
Does anyone try to withdraw USD/EUR from Bitstamp to other third parties such as Okpay or Moneypolo ? I wrote a ticket to them for concerning but seem they are getting stuck with huge requests.
By the way,i am thinking of registering an online bank account in Europe.Is it possible to do this ?
Thank buddy
|
|
|
|
Polo close all my previous tickets, but still i have not receive the 11-bitcoin i'm supposed too since 29april2017, so its been 17days
~snip~
Their traffic seems fine right now, I can trade smoothly, place buy and sell orders of NXT several times and it worked as how it used to be, so I figure they're cleared their issue. And about your ticket, maybe it's a stupid suggestion, but since they close them all, why don't you open a mew one? Maybe they intentionally close every ticket to "reset" the ticket submissions that became chaotic and we are supposed to submit a new one? they left 1 ticket open, but refuse to reply at all 18days nowI did some noises in trollbox and admin solved for me.Please do the same because it was my last choice yesterday to get back 0.69 BTC.That's really useful way if the support guy doesn't solve your case.Your 11 BTC withdrawal is really big. |
|
|
|
|
You guys must be careful with Poloniex.I've posted 2 tickets for supporting in BTC withdrawal because my BTC was hold by Poloniex.There was 1 support guy received ticket and he kept silent for almost nearly 4 days.
After that,my friend told me that should post more questions in troll box for admin and mod.Amazingly,they solved my case right after i posted annoucements.What the hell is that ? What did they do with my money in last 4 days ?
You can easily search in this forum,many cases like me in the past.Never trade on Poloniex again.PLEASE BE CAREFUL
|
|
|
|
|
Same issue here.Waiting for over 72 hours but still no respond.I will never trade at Poloniex again.Nearly 1 BTC is still there without any feedback.Very bad services for Poloniex
|
|
|
|
|
I'm being stuck with the BTC withdraw at Poloniex exchange.I did withdraw 0.7 BTC (nearly 1000 USD) without any transaction ID and the status is displayed
"Awaiting Approval BTC 0.69770054
2017-05-13 14:02:52 Address: 1EdQz7eUFuZ6JMvFFepDG1ARurgP"
I posted a ticket 3 days ago since Saturday 13rd May and there is no respond from support team.
Is it possible of losting money here ? Please help and advice
|
|
|
|
i think we're only waiting. Yesterday, bitstamp support replied after 4 days: " Dear Pham, according to our logs your withdrawal was finished and the funds sent to your designated account. Please note that international wire transfers usually take up to 5 business days to arrive. If you should not receive your funds within the next few business days, please feel free to contact us again. Best regards, Rok Štucin " Money come very fast, but money out too slow.  ) hi Saga,What's is the bank that you are using for ? |
|
|
|
Thanks,i got it.But after 1 day mined of VTC - Lyre2re ,seem the profit did not equal FTC,just back to mine FTC - the last stand at this time.Anyone got higher mining speed ?please help to share the configs pls,nearly die at this time  What are you getting? Really appreciate your kernel for mining FTC,it's helping us survive at this time & no more request from you.I'm getting 140 Kh/s with R9 270 & 280 Kh/s with 7950,but seem diff and hashrate increased while the price is going down.Life is so hard Ah, okay. I've got 290kh/s on 270X and 420kh/s on 7950 so far - still working. Congrats.You are genius.Finding the way to catch you ;-) ,just kidding |
|
|
|
Thanks,i got it.But after 1 day mined of VTC - Lyre2re ,seem the profit did not equal FTC,just back to mine FTC - the last stand at this time.Anyone got higher mining speed ?please help to share the configs pls,nearly die at this time What are you getting? Really appreciate your kernel for mining FTC,it's helping us survive at this time & no more request from you.I'm getting 140 Kh/s with R9 270 & 280 Kh/s with 7950,but seem diff and hashrate increased while the price is going down.Life is so hard |
|
|
|
Thanks,i got it.But after 1 day mined of VTC - Lyre2re ,seem the profit did not equal FTC,just back to mine FTC - the last stand at this time.Anyone got higher mining speed ?please help to share the configs pls,nearly die at this time |
|
|
|
My sgminer versions are updated with Lyra2RE now for those that want to use it
Hello,where do i download the Sgminer for Lyra2RE friend ? Thank you |
|
|
|
R9 280X hynix rawintensity 6144 Worksize 256 tc 8192 1140/1600 gpu-threads 2 amd 14.6rc2 280 kH/s ..I need better settings  R9 280X hynix rawintensity 5120 Worksize 64 tc 8192 982/1450 gpu-threads 2 amd 14.6rc2 300 kH/s Thank you,this conf worked well which miner and kernel do ypu have in this settings? Use Wolf's kernel and one of sgminer 5 modded for neoscrypt ,you could search easily within this topic |
|
|
|
R9 280X hynix rawintensity 6144 Worksize 256 tc 8192 1140/1600 gpu-threads 2 amd 14.6rc2 280 kH/s ..I need better settings R9 280X hynix rawintensity 5120 Worksize 64 tc 8192 982/1450 gpu-threads 2 amd 14.6rc2 300 kH/s Thank you,this conf worked well |
|
|
|
So the new neoscrypt kernel "isn't released yet", but the hashrate on most of the neoscrypt coins has doubled in the last few hours..
Is that's how it's gonna be? Know someone to get the new kernel?
Nope. It's here: https://ottrbutt.com/tmp/neoscrypt.clWorksize should be 64, don't bother setting TC, GPU threads 2. Basically the same as my earlier screenshot. Thank you, dear)) 256 @ 7970 240 @ 280x Would be nice if you share a little informations ,such as : -Your OS ? -Your SGminer version ? -Your AMD driver version ? I could mine as higher speed but more HW also PiMP 1.4 CGMiner 5.0.0 14.6 Thanks buddy |
|
|
|
So the new neoscrypt kernel "isn't released yet", but the hashrate on most of the neoscrypt coins has doubled in the last few hours..
Is that's how it's gonna be? Know someone to get the new kernel?
Nope. It's here: https://ottrbutt.com/tmp/neoscrypt.clWorksize should be 64, don't bother setting TC, GPU threads 2. Basically the same as my earlier screenshot. Thank you, dear)) 256 @ 7970 240 @ 280x Would be nice if you share a little informations ,such as : -Your OS ? -Your SGminer version ? -Your AMD driver version ? I could mine as higher speed but more HW also |
|
|
|
Hi Claymore
Your miner did not run with my rig (6 cards HD 7950 - 14.7 RC3 driver).I ran debug and it's showing below,please help
C:\batcoin\XCN>NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CRBpyT
sTAtDcCtgQDFgMsV2djLkiS9Mvd9 -p x -dbg 1
Main pool is xcnpool.1gh.com
╔════════════════════════════════════════════════════════════════╗
║ Claymore XCN GPU Miner v2.1 Beta ║
╚════════════════════════════════════════════════════════════════╝
Cards available: 6
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
GPU #4: name: Tahiti, 3072 MB available, 28 units
GPU #5: name: Tahiti, 3072 MB available, 28 units
Total cards: 6
Catalyst 14.7 is REQUIRED for best performance and compatibility
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing, please wait...
0 m = 2
1 m = 2
2 m = 2
3 m = 2
4 m = 2
5 m = 2
POOL version
How long did you wait? https://bitcointalk.org/index.php?topic=774601.msg8877670#msg8877670Claymore,it's running now,thank you for help.It took almost 5 minutes for the preparation |
|
|
|
|
Hi Claymore
Your miner did not run with my rig (6 cards HD 7950 - 14.7 RC3 driver).I ran debug and it's showing below,please help
C:\batcoin\XCN>NsGpuXCNMiner.exe -o stratum+tcp://xcnpool.1gh.com:7333 -u CRBpyT
sTAtDcCtgQDFgMsV2djLkiS9Mvd9 -p x -dbg 1
Main pool is xcnpool.1gh.com
╔════════════════════════════════════════════════════════════════╗
║ Claymore XCN GPU Miner v2.1 Beta ║
╚════════════════════════════════════════════════════════════════╝
Cards available: 6
GPU #0: name: Tahiti, 3072 MB available, 28 units
GPU #1: name: Tahiti, 3072 MB available, 28 units
GPU #2: name: Tahiti, 3072 MB available, 28 units
GPU #3: name: Tahiti, 3072 MB available, 28 units
GPU #4: name: Tahiti, 3072 MB available, 28 units
GPU #5: name: Tahiti, 3072 MB available, 28 units
Total cards: 6
Catalyst 14.7 is REQUIRED for best performance and compatibility
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing, please wait...
0 m = 2
1 m = 2
2 m = 2
3 m = 2
4 m = 2
5 m = 2
POOL version
|
|
|
|
are you gonna release these kernels any time soon?
one thing i like in neoscrypt miner, they keep all in github as they make any changes
you can allways have the latest and fastest version
they are not holding things in secret..
lot of people the way claymore makes it..
The full kernel? No. Might I leak a few optimizations? Maybe. And I could probably do some work on neoscrypt, too; just hasn't looked profitable. my days mining x11 are over, just no profit there, even if i had my 4.4mhs -->6.2mhs so i dont really care about the kernels myself. about neo, coins are moving to it one by one, FTC going on friday They would really use some help with kernel, there is some problem with radeon cards older than hd7000 series. kernels is not vectorised so cards like 6000 series have extreme poor hashrate for now. Hm... at first glance, the code looks decent, which is quite surprising - I see a couple things that may be kinda stupid, but on the whole, not terrible. i have read about u wolf0 on other threads so tread lightly here
What have you read? I'm curious.  Sorry was not you, another wolf ... Oh, okay. Got 6.6 - 6.7 on 280X; 290X is at 9.3MH/s. Shooting for 10MH/s on 290X. I read a lot of news that you got very high hash rate.Glad if you would share some settings for us,otw it's just show that you are selfie |
|
|
|
|
1 more question : i saw the unconfirm coins are slowing down after 2 or 3 days mining,then if i close the miner and re-open it again,the unconfirm status show the number increasing.
|
|
|
|
I got a blue dead screen when mining XPM with HD7990,anyone got this ?  Have you tried "troubleshooting" section from readme file? I look to every single row in your readme file  ,but not yet disable the Overclock,let me try 1 last time.Will feed back soon |
|
|
|
I got a blue dead screen when mining XPM with HD7990,anyone got this ? |
|
|
|
|
