Show Posts
|
Pages: [1] 2 3 »
|
The coin is dead. Only 3-4 people are mining it. The buy pool will dry up soon.
If you are expecting anything else from this coin i would not hold my breath.
|
|
|
Lost quite a bit of speed with the new version..
Testing with datacoin
10.2.2 > 178-182 CPD on all 3 of my cards. 2x RX580 and 1 R9 280
10. 3 > 160 - 165 CPD on each card if i play with the settings i can get the RX580's to 170-175 CPD but the R9280 Still sits in the low 160's
|
|
|
How long do transfers take?
I sent a bunch of coins and they are still sitting at 0/unconfirmed something about memmory buffer.
Whats the deal with this? Almost been 24 hours.
|
|
|
Can any one point me in the direction to help
Im mining datacoin. i have two GPU's.
RX 580 and a R9 280X
If i mine only with the R9 280X i get about 180CPD
If i mine only with the RX 580 i get 207 - 214CPD
However if i mine with both of them at the same time i get 160 on the R9 and 180-185 on the 580.
Any one know why im losing CPD on my GPU's. I've tried the CPU offload at 0,1 and 2. I have a I7 4770k
No matter what settings i change i cant seem to get the max from both GPU's if they are both mining at the same time.
Have you tried two miner instances? yes same results
|
|
|
Can any one point me in the direction to help
Im mining datacoin. i have two GPU's.
RX 580 and a R9 280X
If i mine only with the R9 280X i get about 180CPD
If i mine only with the RX 580 i get 207 - 214CPD
However if i mine with both of them at the same time i get 160 on the R9 and 180-185 on the 580.
Any one know why im losing CPD on my GPU's. I've tried the CPU offload at 0,1 and 2. I have a I7 4770k
No matter what settings i change i cant seem to get the max from both GPU's if they are both mining at the same time.
|
|
|
I have just over 52 XPM(Primecoin), looking to trade for XRP(Ripple)
Please send me a message.
Willing to discount a little if you take all 52XPM.
|
|
|
My dogs bumped my machine and caused it to reboot. Now i get this error when trying to start the miner. any one know how to fix this error?
OpenCL error: -1001 at C:/build/xpmclient/src/opencl.cpp:14
|
|
|
Share values: # value # value # value # value 7 0.0007 8 0.0187 9 0.3948 10 7.6365
what is share values for #11 #12 #13?
It would be the same as 10. 10 is a block. So is 11,12 and 13. So they will have the same value
|
|
|
With this potential, after 9 days, in the calculator we will write "difficulty - 12" Diffuculty 12 required 30 times more network power, than 11, not real now with current XPM price. at difficulty 12 good GPU's will be producing a whopping 0.016 CPD - is that right?
25-27 times less than CPD with target=11. in other words - in a couple of weeks, it will not be interesting to mine this coin. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) when it moved from diff 9>10 it did the same thing. then leveled out for 4 years. this coin will sit sit at diff 11.7/11.8 for years
|
|
|
Hi, eXtremal! I have the following problem. I can not launch your miner on nvidia 1080 good. I have 8 cards. On 4 cards the miner works well, but as I launch 5+ card I have an issue - the processor is loaded 100% and the hashrate starts to drop. There are no such problems on AMD cards. Maybe some settings?
What CPU are you using? Try increasing or decreasing the CPU offload. Even with a GPU miner this coin is CPU heavy, more cards = higher CPU usage. Also Nvidia pushes more to the CPU then AMD
|
|
|
I have hidden DTC pool on coinsforall: http://coinsforall.io/#!/coin/DTC, but it not tested. I have moved I gpu to it for testing purposes ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) server = "coinsforall.io"; port = "6670";
Are you working on this? I would mine on this pool if it was fully developed
|
|
|
why am i getting
* warning: ran out of hashes, increasing sha256 work size coefficient to 65536 * warning: ran out of hashes, increasing sha256 work size coefficient to 65536 * warning: ran out of hashes, increasing sha256 work size coefficient to 98304 * warning: ran out of hashes, increasing sha256 work size coefficient to 131072
Then its starting?
|
|
|
Since difficulty is low can we CPU mine this much like Primecoin back in the day?
I have 5 servers each with 128 cores that sit idle all day in a test environment. I cant find a CPU miner anywhere.
Any one have one that's pool capable?
Hi drozenski, Primecoin cpu miner: https://github.com/j0nn9/XPMinerMaybe I say a big bullshit ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) since you can not install anything, but you can not put the miner on an external drive with, for example, USB and launch it from there? Thats a Linux only miner ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) I dont have physical access either. They are over an hour away in a data center. So USB is out of the question. Only time were ever at the data center is for upgrades or if something failed. Oh well i went back to Monero
|
|
|
Since difficulty is low can we CPU mine this much like Primecoin back in the day?
I have 5 servers each with 128 cores that sit idle all day in a test environment. I cant find a CPU miner anywhere.
Any one have one that's pool capable?
Interesting... you can use this wallet https://sourceforge.net/projects/datacoin/ to CPU mine. It contains an embedded CPU miner (select the amount of cores) if you would just like to test it out on one server first. Otherwise, you can do what Chicago suggested. Again i cant install anything on these systems. We use them for testing scientific models before they are uploaded for full modeling. Normally these take 2-3 days of cpu power then they lay dormant weeks on end until the next research project. I would need a miner that i can run in a CMD prompt. Nothing is allowed to be installed or it could mess with test results. Hi drozenski, If you're able to execute a CPU miner as a user on the system, then you're able to execute a Datacoin-Qt or datacoind as a user. An "installation" would be if the program became installed and was available for all users through their Start Menu. Simply running a Datacoin-Qt or datacoind as a user without performing a full installation is just like running a CPU miner in that the user is just running a program which writes some data to the user's profile directory. In the case of Datacoin, the files would be written into %APPDATA%\Datacoin. Are you saying there is a difference in your environment which makes it safe to use a CPU miner which writes log files and other data but not safe to run the node software? If so - then what do you think is the functional difference? Best Regards, -Chicago The CPU miner i have now does not write any logs and allows me to run it from a network share. Been very successful for Monero mining. I was just hoping some one has something similar. But looks like the CPU miners all died when GPU mining came out.
|
|
|
Since difficulty is low can we CPU mine this much like Primecoin back in the day?
I have 5 servers each with 128 cores that sit idle all day in a test environment. I cant find a CPU miner anywhere.
Any one have one that's pool capable?
Interesting... you can use this wallet https://sourceforge.net/projects/datacoin/ to CPU mine. It contains an embedded CPU miner (select the amount of cores) if you would just like to test it out on one server first. Otherwise, you can do what Chicago suggested. Again i cant install anything on these systems. We use them for testing scientific models before they are uploaded for full modeling. Normally these take 2-3 days of cpu power then they lay dormant weeks on end until the next research project. I would need a miner that i can run in a CMD prompt. Nothing is allowed to be installed or it could mess with test results.
|
|
|
I just picked up a new GPU. AMD RX580. When ever i try and start the miner it just crash's. Any idea on how to get it working on the new card?
I had a 280x previously.
Im getting this
found platform[0] name = 'AMD Accelerated Parallel Processing' <info> found 1 devices Using device 0 as GPU 0 <info> compiling ... <info> source: 236813 bytes
error: 64-bit kernels not supported on a 32-bit executable Frontend phase failed compilation. Error: Compiling CL to IR
prepare_adl success GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_C5801682&REV_E7_4&B857930&0&0009A iBusNumber 5 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon RX 580 Series GPU 0 Radeon RX 580 Series hardware monitoring enabled Failed to ADL_Overdrive5_ODPerformanceLevels_GetOpenCL error: -46 at /build/xpmclient/src/xpmclient.cpp:101 Existing OpenCL kernel (kernel.bin) incompatible with configuration Please remove kernel.bin file and restart miner
Hi drozenski, Great to see you mining Datacoin! Did you mine with the 280x on this system? Have you attempted what the program is asking of you --> "Please remove kernel.bin file and restart miner" You can find this file in the folder that contains your Datacoin miner, perhaps called "dcclient_vX.X.X" -- and contains "kernel.bin" -- remove that file by either deleting it, or even better, putting in another folder to save just in case. The kernel may need to rebuild to work with the new GPU... when you restart the miner, it should create a new kernel.bin Let us know how it goes Regards, DatacoinMiner I was able to figure it out. Had to set my system virtual memory from 32GB to 18GB
|
|
|
I just picked up a new GPU. AMD RX580. When ever i try and start the miner it just crash's. Any idea on how to get it working on the new card?
I had a 280x previously.
Im getting this
found platform[0] name = 'AMD Accelerated Parallel Processing' <info> found 1 devices Using device 0 as GPU 0 <info> compiling ... <info> source: 236813 bytes
error: 64-bit kernels not supported on a 32-bit executable Frontend phase failed compilation. Error: Compiling CL to IR
prepare_adl success GPU 0 iAdapterIndex 0 strUDID PCI_VEN_1002&DEV_67DF&SUBSYS_C5801682&REV_E7_4&B857930&0&0009A iBusNumber 5 iDeviceNumber 0 iFunctionNumber 0 iVendorID 1002 strAdapterName Radeon RX 580 Series GPU 0 Radeon RX 580 Series hardware monitoring enabled Failed to ADL_Overdrive5_ODPerformanceLevels_GetOpenCL error: -46 at /build/xpmclient/src/xpmclient.cpp:101 Existing OpenCL kernel (kernel.bin) incompatible with configuration Please remove kernel.bin file and restart miner
|
|
|
does this support the primcoin/datacoin algo?
I cant seem to find it.
|
|
|
All these servers are running a headless version of windows. I own the company but these servers are configured in such a way that installing new software is a pain in the ass process. However running a miner in a CMD promt is no problem. I have a CPU miner that works with the algo's listed below and I've been using it on monero but would really like to see what 640 cores could do on a pool for datacoin. anime Animecoin (ANI) argon2 axiom Shabal-256 MemoHash bastion blake blake256r14 (SFR) blakecoin blake256r8 blake2s Blake-2 S bmw BMW 256 c11 Chaincoin cryptolight Cryptonight-light cryptonight cryptonote, Monero (XMR) decred Blake256r14dcr deep Deepcoin (DCN) dmd-gr Diamond drop Dropcoin fresh Fresh groestl Groestl coin heavy Heavy hmq1725 Espers hodl Hodlcoin jha jackppot (Jackpotcoin) keccak Maxcoin keccakc Creative Coin lbry LBC, LBRY Credits luffa Luffa lyra2h Hppcoin lyra2re lyra2 lyra2rev2 lyrav2, Vertcoin lyra2z Zcoin (XZC) lyra2z330 Lyra2 330 rows, Zoin (ZOI) m7m Magi (XMG) myr-gr Myriad-Groestl neoscrypt NeoScrypt(128, 2, 1) nist5 Nist5 pentablake 5 x blake512 phi1612 phi, LUX coin pluck Pluck:128 (Supcoin) polytimos quark Quark qubit Qubit scrypt scrypt(1024, 1, 1) (default) scrypt:N scrypt(N, 1, 1) scryptjane:nf sha256d Double SHA-256 sha256t Triple SHA-256, Onecoin (OC) shavite3 Shavite3 skein Skein+Sha (Skeincoin) skein2 Double Skein (Woodcoin) skunk Signatum (SIGT) timetravel timeravel8, Machinecoin (MAC) timetravel10 Bitcore (BTX) tribus Denarius (DNR) vanilla blake256r8vnl (VCash) veltor whirlpool whirlpoolx x11 Dash x11evo Revolvercoin (XRE) x11gost sib (SibCoin) x13 X13 x13sm3 hsr (Hshare) x14 X14 x15 X15 x16r Ravencoin (RVN) x17 xevan Bitsend (BSD) yescrypt Globlboost-Y (BSTY) yescryptr8 BitZeny (ZNY) yescryptr16 Yenten (YTN) zr5 Ziftr
|
|
|
Since difficulty is low can we CPU mine this much like Primecoin back in the day?
I have 5 servers each with 128 cores that sit idle all day in a test environment. I cant find a CPU miner anywhere.
Any one have one that's pool capable?
|
|
|
|