Show Posts
|
Pages: [1] 2 3 4 »
|
Wir haben den S7 nun auch gelistet: http://asicminer-shop.de/Bitmain-Antminer-S7-486-TH-sWir sind auch weiterhin der einzige offizielle Partner von Bitmaintech in Europa. Ansonsten ist das Werben mit 2 Jahren Gewährleistung vermutlich wettbewerbswidrig, da es keine großzügige Geste ist, sondern gesetzlich geregelt ist. Die gibt es also bei jedem deutschen Händler. BTW: Wer denkt Shopbestellungen stehen bei Bitmain an erster Stelle, glaubt vermutlich auch an Yesminers ;-)
|
|
|
Raspberry Pi 2 Modell B (Made in UK) http://asicminer-shop.de/Raspberry-Pi-2-Modell-B-Made-in-UK_1Our price: 39,99 € including 19% VAT., plus shipping ---------------------------------------------------------------------- The Raspberry Pi 2 Model B is the second generation Raspberry Pi. It replaced the original Raspberry Pi 1 Model B+ in February 2015. Compared to the Raspberry Pi 1 it has: A 900MHz quad-core ARM Cortex-A7 CPU 1GB RAM Like the (Pi 1) Model B+, it also has: 4 USB ports 40 GPIO pins Full HDMI port Ethernet port Combined 3.5mm audio jack and composite video Camera interface (CSI) Display interface (DSI) Micro SD card slot VideoCore IV 3D graphics core Because it has an ARMv7 processor, it can run the full range of ARM GNU/Linux distributions, including Snappy Ubuntu Core, as well as Microsoft Windows 10 (see the blog for more information). The Raspberry Pi 2 has an identical form factor to the previous (Pi 1) Model B+ and has complete compatibility with Raspberry Pi 1.
|
|
|
http://asicminer-shop.de/Raspberry-Pi-2-Modell-B-Made-in-UK39,99 € inkl. 19% USt., zzgl. Versand ---------------------------------------------------------------------------------------- Raspberry Pi 2 Modell B (Made in UK) Der Raspberry Pi 2 Modell B bietet eine erhebliche Leistungssteigerung gegenüber seinen Single-Core-Vorgängern! Er ist bis zu sechsmal schneller. Neben einem neuen Quad-Core Cortex-A7-Prozessor verfügt der Raspberry Pi 2 Modell B nun auch über 1 GB RAM-Speicher. Der Betriebssystemkern wurde aktualisiert, um die neueste ARM Cortex-A7-Technologie voll auszuschöpfen. Hardware und Software sind weiterhin abwärts kompatibel mit dem Raspberry Pi 1 Modell A+/B+. Broadcom BCM2836 900 MHz ARM Cortex-A7 Quad-Core-Prozessor mit VideoCore IV Dual-Core-GPU Die GPU bietet Open GL ES 2.0, OpenVG mit Hardwarebeschleunigung und 1080p30 H.264 High-Profile-Decoding Die GPU ermöglicht 1 GPixel/s, 1,5 GTexel/s oder 24 GFLOPs mit Texturfilterung und DMA-Infrastruktur 1 GB LPDDR2 SDRAM HD 1080p-Videoausgang Composite-Video-Ausgang (PAL/NTSC) Stereo-Audioausgang Ethernet-Anschluss 10/100 BaseT RJ45 Video/Audiobuchse HDMI 1.3 und 1.4 4-polige Audio/Composite-Video-OUT-Buchse, 3,5 mm 4 USB 2.0-Buchsen 15-poliger MPI CSI-2-Steckverbinder für die Raspberry Pi HD-Videokamera 15-poliger serieller Display-Schnittstellensteckverbinder MicroSD-Kartensteckplatz 40-polige Stiftleiste für GPIO und serielle Busse (kompatibel mit 26-poliger Stiftleiste für den Raspberry Pi 1) Stromversorgung: +5 V @ 2 A über microUSB-Buchse Abmessungen: 86 x 56 x 20 cm Die Firmware sucht nun nach Zusatzplatinen, die mit den HAT-Designrichtlinien konform sind. Dies ermöglicht es dem Raspberry Pi 2 Modell B, die GPIO automatisch für eine Erweiterungsplatine einzurichten und entsprechende Treiber zu laden. Weitere Informationen finden unter: http://www.raspberrypi.org/introducing-raspberry-pi-hats/Hinweis: Frühere NOOBS-Software Ver 1.3.x ist nicht kompatibel mit Raspberry Pi 2 Modell B. NOOBS 1.4: http://www.raspberrypi.org/downloads/
|
|
|
@fr00p Lass dich doch nicht verarschen. Stornieren, mit Frist für die Rückzahlung, falls die überschritten wird sofort Onlinemahnbescheid. Falls doch versendet wird einfach nicht annehmen. Bestellst du bei einem seriösen Händler erneut hast du die Waren vermutlich schneller. Mein S5 wurde nach 5 Tagen versendet... (nicht nur gedruckt)... zwar noch etwas zu langsam, aber trotzdme alles geklappt...
Wow, 5 Tage ist heute im Onlinehandel eigentlich nicht mehr tragbar. Vor allem wenn mit "Sofort versandfertig, Lieferzeit ca. 1-3 Werktage" geworben wird. Wir versenden normalerweise innerhalb von 24h nach Zahlungseingang. zu PP und Miner: Ist natürlich ausgemachter Schwachsinn! PP hat, wie Flensgold schon schrieb, einige Nachteile für den Händler. Was aber in dem Fall vermutlich der eigentliche Grund sein wird: Mit PayPal funktioniert die Masche "Geld kassieren, keine Gegenleistung und erst mal ewig nicht melden" nicht so gut.
|
|
|
Preissenkung auf idealo.de Preis
|
|
|
My Cloud EX4 wurde von Grund auf für die Qualität und Zuverlässigkeit entworfen, mit der Sie WD verbinden, und ist ein leistungsfähiges NAS mit vier Einschüben für den Heim- oder Bürogebrauch. Es bietet Ihnen ein robustes Metallgehäuse, mehrere RAID-Volumes, einfache Laufwerksinstallation und eine umfassende App-Suite, um Ihr NAS-Funktionsspektrum mit Leistung und Flexibilität zu erweitern.
http://asicminer-shop.de/WD-My-Cloud-EX4-Persoenlicher-Cloud-Speicher-unbestueckt-4-bay310,00 299 € inkl. 19% USt., zzgl. Versand
|
|
|
Dann ist es ja noch nicht Open Source? Anyhow, bin es dir neidig dass du die schon hast und ich noch auf Batch 2 warten muss Groszartige Idee & Produkt! So gesehen noch nicht 100%, hoffe der Hardwareteil wird bald veröffentlicht. Ach Vorfreude ist doch die schönste Freude, oder du kauft einfach einen für die Übergangszeit @Lincoln6Echo Ja, nur noch 44,99, habe es gerade hier angepasst, thx Ja, den Ausdruck kannst du selbst anpassen, siehe: https://github.com/mycelium-com/entropyWobei die Anpassung direkt beim Hersteller erfolgt ist. Die Sticks sind also original versiegelt, falls du mir nicht trauen solltest. Wenn der Drucker jpeg vom USB Stick drucken kann, sollte der Entropystick auch funktionieren. Falls dies unerwartetet Weise nicht so sein sollte nehmen wir zurück. Hoffe alle ? sind beseitigt
|
|
|
The exchange rate is moving towards 300 USD, time to think about the safe storage of your BTC. We are pleased to offer you a new, super simple and secure way to print paperwallets: The new mycelium Entropy USB stick. It was developed by the team of the popular Mycelium AppOrder now: asicminer-shop.de/Entropy_1 47.99 € including 19% VAT., plus shippingFor orders with a valid EU VAT number, or deliveries to non-EU countries your price is 40.33€ | | Mycelium Entropy is a small USB device with a single purpose: Making it easy to create Bitcoin paper wallets in a secure controlled environment.
Paper wallets are created in 2 simple steps:
1. Insert Mycelium Entropy into a printer that allows you to print .jpg from a USB flash drive. 2. Select the print option on the printer.
This way the paper wallet has never touched a computer or a network, and as soon as you eject the device the private key is wiped from memory.
Mycelium Entropy is the easiest and most secure way of creating a paper wallet for offline cold storage.
How does it work?
When Mycelium Entropy is inserted into a USB socket, it powers up and generates a large random number based on hardware entropy. That number is turned into a Bitcoin private key and a Bitcoin address. The private key and the address are turned into QR codes and and stored in a JPG file, and the USB device presents itself as a USB flash drive. This allows a printer that can print photos off a USB flash drive to print the paper wallet directly off the device.
The hardware based entropy is collected by using a chip with static RAM as the source of entropy, as described in the scientific paper: Power-up SRAM State as an Identifying Fingerprint and Source of True Random Numbers (Holcomb, D.E.; Burleson, W.P.; Fu, K.).
Quote from the article: "We demonstrate that a 512-bite SRAM fingerprint contains sufficient entropy to generate 128-bit true random numbers, and that the generated numbers pass the NIST tests for runs, approximate entropy, and block-frequency."
Because Mycelium Entropy collects entropy from tens of thousands of SRAM cells, the result is impossible to guess. Every time you plug the device into a USB port, the power-up process makes the SRAM cells contain a completely random state, allowing the chip to create a different high entropy random number. This allows you to make as many safe and secure paper wallets as you wish.
When paired with the Mycelium Bitcoin Wallet, with its ability to spend directly from cold storage paper wallets, storing and using Bitcoin securely becomes very easy for anyone.
|
Mycelium Entropy is 100% open source, and uses off-the-shelf components. It is fully programmable and more features can be added over time. It is trivially easy to flash the device using either firmware you download from mycelium, signed with their key, or with your own custom changes to our source code. Mycelium guarantee that the device does not contain any malware or back doors. Flashing is as easy as plugging it in, turning on flash mode, and copying files over to the drive. You are able to download the sources, make any changes, build your own and flash the device. Mycelium Entropy, in addition to classic paper wallets, also supports 2-of-3 split private keys using a technique called Shamir's Secret Sharing. This allows you to split a private key into 3 paper shares, where any two of the three shares are needed to get access to your bitcoins. That way, if one of your shares gets lost or stolen, you can still combine the remaining two shares to get access to your funds. This is far superior to any password encrypted private key scheme. Going forward there is a plan to add the option of generating master seeds for BIP32 HD wallets as a downloadable upgrade. Mycelium Entropy is assembled in Austria (known for its strict privacy laws) and is shipped in a hologram sealed box to prevent tampering while en-route. List of Printers Tested So Far:Brother HL-4150CDN Color Laser - OK Brother MFC-J875DW Wireless All-In-One - resets printer when trying to print Brother MFC-8710DW All-in-One Laser - OK Brother MFC-9970CDW Color All-in-One Laser - OK Most Canon printers do not have USB ports. Canon i560 - does not work Canon imageCLASS MF8280CW Color Laser - OK Canon Selphy CP910 - comes out plain white on multiple sheets Canon PIXMA-MG6250 - OK Epson XP-610 - OK Epson XP-810 - OK Epson XP-850 - OK Epson WF-2540 - No way to print photos from USB Epson WF-3520 All-in-One - OK Epson WF-3540 All-in-One - OK Epson WP-4540 - No way to print photos from USB Epson WF-7510 Wide-format All-in-One - OK HP Envy 120 Wireless - OK HP LaserJet Pro 200 Color - OK HP LaserJet Pro MFP M476dw - OK HP Officejet 6700 Premium - OK HP Officejet Pro 8600 Plus - OK HP Officejet Pro 8610 - OK HP Officejet Pro 8630 - OK HP Photosmart 7520 - OK
|
|
|
Der Kurs bewegt sich auf die 300 USD zu, Zeit über die sichere Lagerung der eigenen BTC nachzudenken. Wir freuen uns euch eine neue, supereinfache und gleichzeitig sichere Möglichkeit für den Paperwallet-Druck anbieten zu können, der neue Mycelium Entropy USB Stick. Dahinter steht das Team der beliebten Mycelium AppAb sofort lieferbar: asicminer-shop.de/Entropy 44.99 € inkl. 19% USt., zzgl. Versand | | Mycelium Entropy is a small USB device with a single purpose: Making it easy to create Bitcoin paper wallets in a secure controlled environment.
Paper wallets are created in 2 simple steps:
1. Insert Mycelium Entropy into a printer that allows you to print .jpg from a USB flash drive. 2. Select the print option on the printer.
This way the paper wallet has never touched a computer or a network, and as soon as you eject the device the private key is wiped from memory.
Mycelium Entropy is the easiest and most secure way of creating a paper wallet for offline cold storage.
How does it work?
When Mycelium Entropy is inserted into a USB socket, it powers up and generates a large random number based on hardware entropy. That number is turned into a Bitcoin private key and a Bitcoin address. The private key and the address are turned into QR codes and and stored in a JPG file, and the USB device presents itself as a USB flash drive. This allows a printer that can print photos off a USB flash drive to print the paper wallet directly off the device.
The hardware based entropy is collected by using a chip with static RAM as the source of entropy, as described in the scientific paper: Power-up SRAM State as an Identifying Fingerprint and Source of True Random Numbers (Holcomb, D.E.; Burleson, W.P.; Fu, K.).
Quote from the article: "We demonstrate that a 512-bite SRAM fingerprint contains sufficient entropy to generate 128-bit true random numbers, and that the generated numbers pass the NIST tests for runs, approximate entropy, and block-frequency."
Because Mycelium Entropy collects entropy from tens of thousands of SRAM cells, the result is impossible to guess. Every time you plug the device into a USB port, the power-up process makes the SRAM cells contain a completely random state, allowing the chip to create a different high entropy random number. This allows you to make as many safe and secure paper wallets as you wish.
When paired with the Mycelium Bitcoin Wallet, with its ability to spend directly from cold storage paper wallets, storing and using Bitcoin securely becomes very easy for anyone.
|
Mycelium Entropy is 100% open source, and uses off-the-shelf components. It is fully programmable and more features can be added over time. It is trivially easy to flash the device using either firmware you download from mycelium, signed with their key, or with your own custom changes to our source code. Mycelium guarantee that the device does not contain any malware or back doors. Flashing is as easy as plugging it in, turning on flash mode, and copying files over to the drive. You are able to download the sources, make any changes, build your own and flash the device. Mycelium Entropy, in addition to classic paper wallets, also supports 2-of-3 split private keys using a technique called Shamir's Secret Sharing. This allows you to split a private key into 3 paper shares, where any two of the three shares are needed to get access to your bitcoins. That way, if one of your shares gets lost or stolen, you can still combine the remaining two shares to get access to your funds. This is far superior to any password encrypted private key scheme. Going forward there is a plan to add the option of generating master seeds for BIP32 HD wallets as a downloadable upgrade. Mycelium Entropy is assembled in Austria (known for its strict privacy laws) and is shipped in a hologram sealed box to prevent tampering while en-route. List of Printers Tested So Far:Brother HL-4150CDN Color Laser - OK Brother MFC-J875DW Wireless All-In-One - resets printer when trying to print Brother MFC-8710DW All-in-One Laser - OK Brother MFC-9970CDW Color All-in-One Laser - OK Most Canon printers do not have USB ports. Canon i560 - does not work Canon imageCLASS MF8280CW Color Laser - OK Canon Selphy CP910 - comes out plain white on multiple sheets Canon PIXMA-MG6250 - OK Epson XP-610 - OK Epson XP-810 - OK Epson XP-850 - OK Epson WF-2540 - No way to print photos from USB Epson WF-3520 All-in-One - OK Epson WF-3540 All-in-One - OK Epson WP-4540 - No way to print photos from USB Epson WF-7510 Wide-format All-in-One - OK HP Envy 120 Wireless - OK HP LaserJet Pro 200 Color - OK HP LaserJet Pro MFP M476dw - OK HP Officejet 6700 Premium - OK HP Officejet Pro 8600 Plus - OK HP Officejet Pro 8610 - OK HP Officejet Pro 8630 - OK HP Photosmart 7520 - OK
|
|
|
Da finden sich sicherlich einige 😡
Ja, gerade PNs beantwortet. ... Ich habe dann natürlich gefragt, warum ich erst, nach mehr als 14 Tage (nach dem Widerrufsrecht) Bescheid bekomme.
Antwort: Schulferien und da die Miningerträge nicht schlecht werden können, hat er mir den "gefallen" getan und sie für mich gebunkert.
Schulferien passt doch irgendwie zu dem an den Tag gelegten Verhalten. ICH KANN JEDEM NUR EIN HANDELN MIT IHM ABRATEN!
Da sind wir uns wohl alle einig. --------- Da Hr. Poinart, unserer Auffassung nach, wiederholt gegen das Urteil verstößt wird es Zeit für Runde 2. Der aufmerksame Leser kann sich sicherlich denken was nun folgt
|
|
|
Wem der Widerruf von Herrn Poinart / Menig verweigert wurde möge sich bitte melden!
|
|
|
Preisupdate: 1449 €* (größere Mengen auf Anfrage) *Stückpreis inkl. 19% USt., zzgl. Versand
|
|
|
Ab sofort im shop bestellbar 1479 1449 €* (größere Mengen auf Anfrage) *Stückpreis inkl. 19% USt., zzgl. Versand Antminer S4 - 1449€ - best price Technische Daten:standalone unit, einfach per webbrowser zu konfigurieren Es wird kein extra PC benötigt! Hashrate: 2000 GH/s ±5% Leistungsaufnahme: ~1,4 kW Energieeffizienz: ~0.69 W/GH/s Stromversorgung: internes 80PLUS gold Netzteil Netzwerkverbindung: Ethernet Kabel Abmessungen: 3U Formfaktor, 432mm x 442mm x 133mm Wir sind der einzige von Bitmaintech gelistete Reseller in Europa!Wir bieten nun auch Hosting an Preise starten bei 14,9 Eurocent (brutto), bereits alles inklusive. Miner bleiben in Zentraleuropa, sind also juristisch greifbar. Das Gelände ist komplett eingezäunt und wird 24/7 Kameraüberwacht mit direkter Aufschaltung zu einem Sicherheitsdienst, welcher bei unbefugten Zutritt innerhalb Minuten vor Ort ist. Die Miner sind selbstverständlich gegen Diebstahl, Feuer, etc versichert. Vor Ort wird eine ausreichende Anzahl an Ersatzgeräten und Netzteilen vorgehalten. Antminer S4 - 1449€ - best price
|
|
|
|