Show Posts
|
Pages: [1]
|
He did not work well at his workplace, I carried out diagnostics in my other two laboratories, where I replaced power supplies and boards.
|
|
|
Hey, i have same problem. But i found one nuance. You was try to start only one of this boards?
When i start only one of 3 boards it work. If more than one board - get error.
|
|
|
I've tried everything. I've updated the firmware, tried different power supplies, different control boards, etc. Nothing helps.
|
|
|
Hello. I have problem with new S19 and S19 Pro asic. After start asic was get error REG_TYPE = 1 and stop mining. But if i plug only one hashboard, at any slot, any plce it work. If more than one hashboard i always get this error. What to do? CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152 pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 209572K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19804K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090e410 (9242 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b3cda0 ( 244 kB) .bss : 0xc0b3cda0 - 0xc0b77024 ( 233 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 6732K (cd467000 - cdafa000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154 Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: disable subpage write nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: NAND_ECC_HW nand: NAND_ECC_HW_SYNDROME mtd->writesize = 2048 ecc->strength = 1 ecc->size = 2048 mtd->writesize = 2048 chip->ecc_strength_ds = 4 chip->ecc_step_ds = 512 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 8 ofpart partitions found on MTD device pl35x-nand Creating 8 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000005200000 : "sig" 0x000005200000-0x000006000000 : "reserve1" 0x000006000000-0x000007000000 : "upgrade-ramfs" 0x000007000000-0x00000a800000 : "upgrade-file" 0x00000a800000-0x000010000000 : "reserve2" nf_conntrack version 0.5.0 (3635 buckets, 14540 max) ip_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro devpts: called with bogus options ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 262741923 ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4 ubi0: background thread "ubi_bgt0d" started, PID 729 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model ubi2: attaching mtd4 ubi2: scanning is finished ubi2: attached mtd4 (name "reserve1", size 14 MiB) ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0 ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2642727309 ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4 ubi2: background thread "ubi_bgt2d" started, PID 740 UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744 UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc" UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs) UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB) UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 34DDD26A-2E95-41B3-8532-5CCDD42C37CF, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: avahi-daemon urandom read with 2 bits of entropy available macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfbc8000 *base_vir_addr = 0xb031 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000
===========================================Miner log=========================================== 1970-01-01 00:00:10 Miner compile time: Mon Oct 26 17:45:27 CST 2020 type: Antminer S19 1970-01-01 00:00:11 This is fix-freq version 1970-01-01 00:00:11 Miner compile time: Mon Oct 26 17:45:27 CST 2020 type: Antminer S19 1970-01-01 00:00:11 commit version: 62e4736 2020-09-21 11:17:56, build by: jenkins 2020-10-26 17:54:40 1970-01-01 00:00:11 opt_multi_version = 1 1970-01-01 00:00:11 opt_bitmain_ab = 1 1970-01-01 00:00:11 mid_auto_gen = 0 1970-01-01 00:00:11 opt_bitmain_work_mode = 0 1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000 1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7 1970-01-01 00:00:11 Note: front fan is power on! 1970-01-01 00:00:11 Note: rear fan is power on! 1970-01-01 00:00:11 start the http log. 1970-01-01 00:00:11 httpListenThread start ret=0 1970-01-01 00:00:11 start listen on 6060 ... 1970-01-01 00:00:11 load machine NBS1902 conf 1970-01-01 00:00:11 machine : NBS1902 1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2 2021-02-05 14:13:20 miner ID : 80020cce7510481c 2021-02-05 14:13:20 FPGA Version = 0xB031 2021-02-05 14:13:20 HASH_ON_PLUG V9 = 0x7 2021-02-05 14:13:20 ==========================capability start========================== 2021-02-05 14:13:20 board num = 3 2021-02-05 14:13:20 board id = 0, chain num = 1 2021-02-05 14:13:20 chain id = 0 2021-02-05 14:13:20 board id = 1, chain num = 1 2021-02-05 14:13:20 chain id = 1 2021-02-05 14:13:20 board id = 2, chain num = 1 2021-02-05 14:13:20 chain id = 2 2021-02-05 14:13:20 ==========================capability end============================ 2021-02-05 14:13:20 chain num = 3 2021-02-05 14:13:22 [chain 0] 2021-02-05 14:13:22 0x0000 11 42 7E 7C 4B 48 16 F2 DA CC 96 A6 7B 13 9E 45 2021-02-05 14:13:22 0x0010 A6 28 6D 8B D0 49 63 F9 37 F6 39 28 32 74 8F 80 2021-02-05 14:13:22 0x0020 17 0A 5D 9A CE 5F AA 18 8E E7 96 6C BE F4 AA 10 2021-02-05 14:13:22 0x0030 FA 6A A9 41 8D 23 09 03 2E 10 6B 57 C4 CC B6 60 2021-02-05 14:13:22 0x0040 A4 28 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:22 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2021-02-05 14:13:22 2021-02-05 14:13:23 [chain 1] 2021-02-05 14:13:23 0x0000 11 42 BD CE AC 60 E6 08 D0 06 87 36 E0 A2 D5 C3 2021-02-05 14:13:23 0x0010 5F 54 4E DF E3 45 17 C1 76 22 78 E4 70 59 77 5C 2021-02-05 14:13:23 0x0020 66 1F 4F C6 B0 BC 1A 7F B1 5B AB 5F 05 2F 5E E7 2021-02-05 14:13:23 0x0030 F9 31 D4 49 9A 2D 48 BF CF 7D 9B B0 C0 CE 73 F3 2021-02-05 14:13:23 0x0040 BC B8 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:23 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2021-02-05 14:13:23 2021-02-05 14:13:25 [chain 2] 2021-02-05 14:13:25 0x0000 11 42 9C DC 64 48 28 8B 63 EC 89 BE D6 CC 08 0F 2021-02-05 14:13:25 0x0010 45 F8 25 C9 C5 B4 C3 C4 06 CF 7E 62 41 CE 27 5D 2021-02-05 14:13:25 0x0020 6C 78 02 C6 1E 88 04 6A 5B A8 AD 4B C3 F0 17 F8 2021-02-05 14:13:25 0x0030 4B 03 5E 88 EF 34 C1 87 50 A0 0E 55 DA 98 CB E7 2021-02-05 14:13:25 0x0040 C9 84 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x0060 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x0070 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2021-02-05 14:13:25 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5A 2021-02-05 14:13:25 2021-02-05 14:13:25 fan_eft : 0 fan_pwm : 100 2021-02-05 14:13:25 create thread 2021-02-05 14:13:25 fixed working voltage = 1380 2021-02-05 14:13:25 Chain [0] PCB Version: 0x011e 2021-02-05 14:13:25 Chain [0] BOM Version: 0x0100 2021-02-05 14:13:25 Chain [1] PCB Version: 0x011e 2021-02-05 14:13:25 Chain [1] BOM Version: 0x0100 2021-02-05 14:13:25 Chain [2] PCB Version: 0x011e 2021-02-05 14:13:25 Chain [2] BOM Version: 0x0100 2021-02-05 14:13:29 Fan check passed. 2021-02-05 14:13:30 chain[0] PIC jump to app 2021-02-05 14:13:32 Check chain[0] PIC fw version=0x89 2021-02-05 14:13:33 chain[1] PIC jump to app 2021-02-05 14:13:34 Check chain[1] PIC fw version=0x89 2021-02-05 14:13:35 chain[2] PIC jump to app 2021-02-05 14:13:37 Check chain[2] PIC fw version=0x89 2021-02-05 14:13:37 create thread 2021-02-05 14:13:37 max sensor num = 4 2021-02-05 14:13:37 temperature_monitor_thread start... 2021-02-05 14:13:41 power type version: 0x0071 2021-02-05 14:13:41 Enter sleep to make sure power release finish. 2021-02-05 14:14:31 Slept 49 seconds, diff = 5. 2021-02-05 14:14:31 set_voltage_by_steps to 1500. 2021-02-05 14:14:34 start up min temp by 75a = 23 2021-02-05 14:14:34 set UART baud to 115200 2021-02-05 14:14:43 Chain[0]: find 76 asic, times 0 2021-02-05 14:14:50 Chain[1]: find 76 asic, times 0 2021-02-05 14:14:58 Chain[2]: find 76 asic, times 0 2021-02-05 14:14:58 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0 2021-02-05 14:15:01 min freq in eeprom = 675 2021-02-05 14:15:01 fixed frequency is 675 2021-02-05 14:15:01 Bring up temperature is 23 2021-02-05 14:15:01 set UART baud to 12000000 2021-02-05 14:15:02 set_voltage_by_steps to 1380. 2021-02-05 14:15:09 STATUS_INITED: soc init done! 2021-02-05 14:15:09 create thread 2021-02-05 14:15:09 create thread 2021-02-05 14:15:11 start to init... 2021-02-05 14:15:22 Init done! 2021-02-05 14:15:22 STATUS_OKAY 2021-02-05 14:15:22 start the cached job 2021-02-05 14:15:22 Version num 8 2021-02-05 14:15:22 Mask num 0xe000 2021-02-05 14:15:22 freq = 675, percent = 90, hcn = 14560, timeout = 524 2021-02-05 14:15:22 set_start_time_point total_tv_start_sys=140 total_tv_end_sys=141
|
|
|
|