 Show Posts
|
|
Pages: [1]
|
I'm still not able to make TBlackMiner work. I've installed the 1.19 from HiveOs, and this is the screenshot of the Miner console. As you can see is printing multiple time per second the hashrate of each GPU, and still 3 GPU are not recognized. Then they go in timeout and exit, the system freezes, I've to phisically reboot. All are RX 580. I've no problem with other miners.  I'm also having the same issue on Hiveos, all rejected shares Coin: ETC Pool: miningpoolhub GPUs: 4 x RX570 4GB |
|
|
|
|
Perfect! It is working
Any ideas of when SSL connection will be fixed? I prefer to use SSL
Also, the stats is broken when I first launch the miner, but it fixes itself after the few minutes. Any suggestions?
Thanks
|
|
|
|
I'm not getting any shares after running the miner for more than 20 minutes. Can you let me know how to fix it?
wich cards, pool and launchconfig? RTX 3060 on the laptop Flexpool I edited tbminer_flexpool_eth.bat and launched this file My config is TBMiner --algo ethash --hostname eth-us-east.flexpool.io --ssl-port 5555 --ssl --wallet %ETH_WALLET% --worker_name Rig |
|
|
|
|
I'm not getting any shares after running the miner for more than 20 minutes. Can you let me know how to fix it?
PING is showing 0ms
|
|
|
|
0.6-204@210703 🐧
What's new?
MINERS👷♂️
⛏ lolMiner v1.30 (added Autolykos V2 mining ERGO; improved performance and reduced power draw of RTX 3060 semi-unlocker; significantly reduced RAM usage for Nvidia cards on ethash; significantly improved DAG repair process on all Nvidia GPUs; fixed a bug with 3060 semi-unlocker not unlocking after DAG rebuild; fixed a bug in Ethash stratum when mining with Nicehash protocol on some pools not sticking 100% close to protocol; some minor fixes)
⛏ GMiner v2.59 (display pool hashrate for all supported algorithms; added CPU share check for all supported algorithms; removed algorithms: BitTube, Swap)
⛏ SRBMiner-Multi v0.7.7 (added algorithm lyra2v2_webchain: MINTME - MintMe.com coin for CPU/GPU mining, fee 2%; added algorithm ghostrider: RTM - Raptoreum for CPU mining, fee 0.85%; added algorithm cryptonight_turtle for CPU/GPU mining, fee 0.85%; added algorithm randomyada: YDA - Yada coin for CPU mining, fee 0.85%; added algorithm yespowerarwn: ARWN - Arowana coin for CPU mining, fee 0.85%; better auto setup for 'yespower' algorithms; removed devfee for 'cryptonight_cache' algorithm; DevFee for 'heavyhash' algorithm lowered to 1%)
⛏ NBMiner v38.1 (added mining.extranonce.subscribe support for mining ERGO; fixed option enable-dag-cache causes crash on certain situation)
⛏ nanominer v3.3.6 (added option maxRejectedShares: set the maximum amount of rejected shares before restarting miner process/rebooting the rig)
⛏ miniZ v1.8y2 (improvements for Flux, on RTX 30XX; fixed invalid shares on Flux, and ETH; fixed kernel for 1650 Ti, RTX 3060, and Quadro T1000 on Beam; added algo and pers details to Telemetry; improved stale shares; fixed some issues)
⛏ NSFMiner v1.3.14 (added to log difficulty of solutions)
⛏ XMRig v6.13.1 (added support for solo mining with miner signatures for the upcoming Wownero fork)
⛏ CPUminer-Opt-JayDDee v3.16.5 (fixed GBT incorrect target diff in stats)
⛏ CPUminer-Opt-GR v1.1.7 (added additional tuning for AVX2+ instruction sets; detected multiple NUMA nodes on the system and allocate Large Pages to individual nodes; fixed stratum reconnection problems if users were not able to reconnect within the 60-120s; fixed problems with displayed share ping; properly detect problems with Large Pages set up)
⛏ CPUminer-Opt-rplant v5.0.22 (added yespowerarwn algo)
⛏ XMRigCC v2.94 (improved hashrate on RX based algorithms: synced improvements with v6.12.2; fixed invalid shared on panthera algo)
When it will be able to select in lolMiner 1.30 the algo AUTOLYKOS2?. At the moment the update doesn't allow it. Many thanks in advance! Yes, I have the same problem. Adding --algo AUTOLYKOS2 in the "Extra Config Arguments" doesn't work as the Flight Sheet doesn't let me save it without selecting the algo |
|
|
|
|
Hi. Can you look at an issue where the power consumption is not stable and there are random power peaks. When it’s stable, the rig can run around 280W, and sometimes it raise to 380W for few minutes or seconds, and each cards go from 70W to 95-100W… Hashrate always stays stable. I mine on HiveOS
|
|
|
|
VERTHASH ALGO AVAILABLE ON TRM V8.2--
A new TRM is out, v8.2. It includes new VertHash support. An overnight run gave these results:
Mining VTC with 4X Nitro+ 4GB RX580 w/Elpida memory. Clocks 1250/1870, hash 540kH/s per GPU. Seems stable overnight.
I get some rejects, wheras mining Haven (XHV) I had near 0 yesterday with TRM 8.
Currently 26 rejects out of 1650 accepts, >1%
The straight-to-memory verthash.dat is a really nice touch. But, I do notice that the monitoring feature for Claymore's EthMan does not work as it does for ETH mining with TRM. I really like EthMan for my rigs. It would be nice to monitor all my TRM rigs, even if TRM was mining Haven (XHV).
--scryptr
Just curious, what is the power each GPU draws when mining VTC? |
|
|
|
|
Hello. I have been getting a lot of problems trying to mine on MPH. I created worker on the pool and replaced wallet with my username but everytime I start my miner, it only gets to the point "Connected to the pool" and nothing happened. If I let it sit for few mins, the message "Authorization or worker failed" showed up on my miner.
I'm on HiveOS and using lolminer. Is anyone using Hiveos and are currently mining on MPH can share your config?
Thank you
|
|
|
|
|
Hi. I have an issue with the miner. It doesn't seem to work
I'm using hiveos. The extra arguments are
--opencl-threads 2
--opencl-launch auto
--opencl-device 1,2
* ALGO: kawpow
* POOL #1: stratum-ravencoin.flypool.org:3443
* API PORT: 60060
* COMMANDS: hashrate, statistics, pause, resume
[20:58:32] Failed to obtain all required AMD file pointers
[20:58:32] AMD hardware monitoring disabled
[20:58:32] donation: 1%
[20:58:32] send-stale: no
[20:58:32] watchdog: disabled
[20:58:32] initializing GPUs...
[20:58:32] GPU #1: Radeon RX 570 Series [busID: 3] [arch: ellesmere]
[20:58:32] threads: 2, intensity: 23, worksize: 0/256, cu: 32, mem: 4081Mb
[20:58:32] GPU #1: Radeon RX 570 Series [busID: 4] [arch: ellesmere]
[20:58:32] threads: 2, intensity: 23, worksize: 0/256, cu: 32, mem: 4081Mb
[20:59:32] Uptime: 0 days 00:00:59
[20:59:32] GPU #1[T:0C F:0%]: 10s: n/a 60s: n/a 15m: n/a kH/s
[20:59:32] GPU #2[T:0C F:0%]: 10s: n/a 60s: n/a 15m: n/a kH/s
[20:59:32] hashrate: 10s: n/a 60s: n/a 15m: n/a kH/s max: n/a kH/s
|
|
|
|
|
Hi Lollie! Will you be adding Kawpow algorithm in the future release?
|
|
|
|
I got Asus Prime H270 Plus with 2x PCIEX16 Slots. But only the first slot gives me 26mhs, the second 16x slot is not working as the other. Tried swapping out GPUs to see if it's due to the GPU but not.
I already have enabled Gen3 + 4g decoding in Bios.. Not sure what to do :/
Did a quick google search on your mobo, it seems like the second 16x slot is only able to handle x4 mode which explains why the second 16x slot is slower. Same thing with my rig. One GPU is hashing 28 MH/s, second GPU is hashing around 20 MH/s and they are both directly connected to the mobo. |
|
|
|
|
If I had a laptop to mine on, I would definitely buy a laptop stand with 2-3 fans underneath the stand to cool down the laptop.
|
|
|
|
Really amazing work! Got my 580 4G back to 28 Mhs.
How will this behave over time, how much hashrate is lost with each DAG size increase?
would like to know too.. how long until the dag size increases again until it won't work with 4GB card again? No one knows. It all depends on Lollie for his/her magic lol. The 4GB card on Riser is still losing hashrate every dag size increase. Card on x16 is also losing hashrate but I feel like it's doing slower than the one on riser. |
|
|
|
Big up to the dev for lolminer 1.21 Soon. we will reach the same hashrates from 4GB cards in zombie-mode like 8GB video cards can do. Is it possible for the dev to figure out, why GPU in pci-e slot 2 does significantly lower hashrate than GPU in slot 1? GPU-s are both identical. Maybe I should add another RAM stick for dual channel mode? Can anyone with extra RAM kit available test this out, does dual channel memory mode make any difference? https://ibb.co/PjKbNy2 What OC do you have for your GPUs? Bios mod? I have 4 RX570 4GB and they are hasing around 15-16mh/s each. Would love to get as high as possible. Thanks It's got nothing to do with your OC settings. Plug your 4GB cards directly to the motherboard pci-e slots. DO NOT USE RISERS. Link speed between GPU and system memory is what matters, because lolminer uses RAM to compensate missing GPU memory needed for DAG file creation. Thanks. How much RAM do you have on the rig in the screenshot? |
|
|
|
Big up to the dev for lolminer 1.21 Soon. we will reach the same hashrates from 4GB cards in zombie-mode like 8GB video cards can do. Is it possible for the dev to figure out, why GPU in pci-e slot 2 does significantly lower hashrate than GPU in slot 1? GPU-s are both identical. Maybe I should add another RAM stick for dual channel mode? Can anyone with extra RAM kit available test this out, does dual channel memory mode make any difference? https://ibb.co/PjKbNy2 What OC do you have for your GPUs? Bios mod? I have 4 RX570 4GB and they are hasing around 15-16mh/s each. Would love to get as high as possible. Thanks |
|
|
|
|
