i tried it but my hash went down to 26mh/s, ref above 20 doesn't make any change and 2200mhz gets 28mh/s as long as the ref is 20, i'm using the latest amd driver 21.2.3 could that be the cause of low hash?
Hi, did you flash a mod bios already? Or is it still an original bios?
hi, yes it's the original bios, this card is used for gaming that's why i don't want to flash the bios, is flashing the bios a must to get 30mh/s?
i am using rx 580 samsung mem, my ref is 20 in amd memory tweaker and mem freq 2200mhz but i only get 28 mh/s, in the gpu pcie section in trm it shows 1:00.0 but in gpu-z it's pcie 2 is this normal?
Samsung memory usually can only be 2000mhz max, sometime can be 2050mhz. More than that, you will find a lot of error using hwinfo.
Try this, set core clock to 1150, mem 2000, ref 30. And you will get 30+ mhs.
i tried it but my hash went down to 26mh/s, ref above 20 doesn't make any change and 2200mhz gets 28mh/s as long as the ref is 20, i'm using the latest amd driver 21.2.3 could that be the cause of low hash?
if you use a memory frequency of 2200 MHz, then the core must be set to about 1200 MHz to get the maximum speed from the overclocked memory
Perhaps this version of TRM is not adapted for the latest AMD drivers, you better go back to the version, for example 20.5.1 I use it myself and everything is ok
i'll try 20.5.1 now, thanks