Hi Everyone

I am using phoenixminer also MBMiner and i was wondering if there was a way to see what GPU is causing the stale shares ?
I understand that network latency has a part in it, I average about 15ms i think that is pretty good ??



Thanks
Biggs

Hi there

I am just curious if this is normal or not.

I have 3 identical Zotac 3070, and the accepted shares are not even, one of them is around 80% less then the other 2
same with my 2 3090, one of them is half the accepted shares
also my 6900xt and 6700xt they just suck, hardly get any shares

I have a rig with 8 p104-100 and that ones there are 2 or 3 cards that are way less then the rest

I don't have crazy over clocks on them and the AMD cards i have hardly any overclock

I seen this post, not sure if anyone ever heard of this

https://www.reddit.com/r/EtherMining/comments/mvk1h6/why_hashrate_is_not_the_most_important_statistic/

I am using ethermein with NBminer

Thanks
Biggs

 

I don't have any problems when i restart it,
I kind of understand what the other are saying,
What i don't understand is, i was getting around 950mhs
If i use the Eth hash calculator

https://www.cryptocompare.com/mining/calculator/eth?HashingPower=950&HashingUnit=MH%2Fs&PowerConsumption=0&CostPerkWh=0.0&MiningPoolFee=0

That show i should get 0.03 eth a day
a couple weeks ago i was getting 0.055 eth a day
to get 0.055 that should be 1700mhs

I am not complaining i am trying to understand so i can repeat it hehe

Thanks

Hello there

I am just curious if turning off a rig to do whatever for a couple minuets and back on again affect the total out come ??
I understand the time the machine is off you lose that time.
I am mining with Ethermine pool, and i noticed that if i don't touch it at all my payout gap closes buy enough

I had some payout of around 80h to 90h and some of 40h all with the same machines nothing really changed
I am 1% stale shared and i have not seen any invalid shared or rejected shared  

It almost seams like if i turn it off say to zip tie some cables and turn it back on in 2 minutes i lose a lot more then the 2 minutes
Its as if it loses steam and it takes time to get back up to speed

I hope someone understand, not sure if i explained that right

Thanks very much
Biggs
  

I am not 100% sure i am using it right, it did not change anything, I looked it up and tried a few things.

Is this how you use it ??

t-rex.exe --mt 5 -a ethash -o  stratum+tcp://us2.ethermine.org:4444 -u XXXX_MY_WALLET_XXX -p x -w RIG_2

the --mt is from 0 to 5

Is that correct ??

Thanks

That is awesome thanks i will try that
Have to reinstall windows, first it carped out

Its GDDR5X ( Micron )

I always thought they were the exact same
one of them actually says GTX1080 on it
I will check with GPU-Z what kind of memory it is

Hello There

I have a few P104-100 cards witch is a 1080 with all the ports ripped off
I tried the Eth Largement Pill and nothing happens seams pretty easy to use
maybe i am doing something wrong or it dos not work on P104-100

I tried to flash the p104 with a 1080 bios but that did not work, it still comes up as a p104
what i understand the board id is set with resistors on the board it self
I can change them if i know what ones and what value to use


Thanks
Biggs

Hi Mr Miner29

I tried gen 1 gen 2 gen 3 and auto
updated Bios loaded default settings
enabled disable 4G
I am running just a SATA drive on that machine

I pretty much gave up on that biostar board
I put the 3060 in my Asus Z170 board ( Graphic Design Work Computer )
it took some messing around but got both cards working

Thanks for you help :-)
Biggs

Hello everyone

I have a RTX 3060 12GB with the mining nurf,
I been trying a while to get it going, i have a fresh copy on windows 10, and installed the Dev drivers Ver 470.05
It is the only card in the machine and it still drops to 20mhs

Anyone know if there are setting to enable or disable in the bios ??

I tried all kinds of things disabled anything i don't need enabled 4G
PCIEx16 set to auto and gen3 nothing seams to work
I have a biosart TB250 board with a intel i7 7700k

Thanks