has anyone successfully bought one of these?

To answer a few of the PM Questions:

I am currently located in the US, Austin,TX to be exact. Pickup would be fine with me.

here's a pic of what i'm selling.



Escrow would be fine with me, via OgNasty or someone else on the BitcoinTalk list.

based on the PM Offers I'm ok with $15/board (neg) with buyer covering shipping.

This does NOT include the Control Board, as it is used up during the upgrade. I can include some of the leftover hex screws (4 per board).

One of these boards does not have the 6 Pin Connectors but instead has an adapter that screws into the board and let's you use the 6 pins. These will be included with this board.
Also for reference, 3 of the S1's were OC'd @ 200GH/s the other 3 were just run @ stock speeds. If you would prefer a Stock or OC board let me know.

I currently have only Upgraded 2 of the S1's (the stock ones). The remaining 5 are hopefully going to be done today/tomorrow. But that gives me a total of 14 of these boards available after my upgrade is done.

Hope that answers all the questions.

Not sure if there is any interest in these, but i'll have a few on hand after I finish my upgrades. I can ship them in the same packaging that the Upgrades came in (which is pretty extensive).

PM or post here if you are interested.

I currently have 4 S3's, 1 S1 & a Thunder x6 in my office at home, and its getting a little warm in here 

I'm considering setting up some exhaust fan for the units to help cool the office & my home but i have some constraints from my wife.

1. I can't use the window exhaust as the wife doesnt want the window open when no one is home during the day.
2. I cant setup a "vent-a-hood" over the units and exhaust into the attic or setup a exhaust in the exterior wall into the outside.


So what I'm considering, and would like some feedback on, is an exhaust fan through the attic.

What I think i'd like to do is setup a Solar powered Attic fan,
http://www.lowes.com/pd_269916-228-NPSP8WW_0__?Ntt=solar+attic+fan&UserSearch=solar+attic+fan&productId=3122395&rpp=32

and then cut an exhaust grill into the ceiling of my office, the fan would have some duct attached to it that would be connected to the exhaust grill in my office. Thus limiting the solar attic fan intake to the air grill in my office.


Can anyone give me some feedback on this idea? Thanks

I have a new raspberry pi, ( http://www.amazon.com/gp/product/B00LPESRUK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 ) thats running with this psu cable ( http://www.amazon.com/gp/product/B00FIFYQMA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 ) and i've gone through 2 micro sd cards already. I'm also using this Pi Image from Zeus,  https://mega.co.nz/#!Zl5SHapY!11rnnOQRycHiiyl9U5oDJV-HMp2LBGLwJg5m6glbnuE

All setup / configuration was done based on this setup instrucation, for the Thunder x6. http://zeusminer.com/user-manual-ver-1-0/

The first time I accidently unplugg'd the microsd while the unit was on and I was trying to plugin a USB device.

The 2nd time I came home from dinner and found the unit with both the red & green lights on and the Zeus miner thats attached was not mining and I couldnt get to the pi's IP address in a url.

So I thought ok, let's reboot. So I unplugged the pi and rebooted and now once again i'm getting "bad sectors" and the unit wont finish booting.

I've formatted (block by block) the 2 SD Cards and I've also reloaded the image several times. And run Checkdisks on the cards when they are connected.

Can someone help me understand what i'm doing wrong here? or do I just have bad cards? or a bad Pi?

Screenshots of the pi:

I'm pretty sure all the coupons are expired by now.

Why is my order # 57403 on Nicehash, marked as Disconnected. Old job it was only setup on 2014-08-15 20:37:17

How much for the s1's with local pickup?

Looking to buy 2 Antminer S1's with shipping to Texas.

Prefer seller in US, will pay shipping. Escrow Required via OgNasty.

Edit:

Purchases complete.

pics of units? who's paying shipping?

I left several more messages today asking for updates.

Good question Dustin, we have been trying for almost 3 weeks to get 112Bit to answer that question.

Juan?

When do you expect to allow any pool?

newegg accepts bitcoin if you worried about only paying with BTC instead of $

I've also left Skype messages, voice mails and contact requests (on 112bit.com) trying to follow up on this. Thus far, no answer. 

Just wanted to post a follow up, SeniorMember never replied to the Paypal dispute. As such paypal just refunded my purchase.

Just trying to follow up on this, tried calling no answer.

I ended up picking up 2 of these to try them out. http://www.newegg.com/Product/Product.aspx?Item=N82E16835213010

After installation I saw a 10 degree decrease in temperature after sustained usage (~1h). They are much louder than the original bitmain fasn, but with the box fan I have running over the units also Its hardly noticeable. However, they put out a TON more air than the bitmain fans.

Acslackr5, I did, I got it sunday night i had to request it directly. I am order# 1228.

I received mine yesterday acslackr5, shipped 7/18 supposed to arrive today.

-- UPdate - My units just arrived.