Show Posts
With the new version of fw on page asics stats I see that (ffffffff) at the end of each record but the SP20 that undermined unless there is a record with a different letter, for example (fffffdff).
Quote
2.7.1
Uptime:4741 | FPGA ver:100 | BIST in 147
-----BOARD-0-----
PSU[UNKNOWN]: 0->(268w/268w)[268 268 268] (->268w[268 268 268]) (lim=288) 0c 405GH cooling:0/0xdc
-----BOARD-1-----
PSU[UNKNOWN]: 0->(192w/192w)[192 192 192] (->192w[192 192 192]) (lim=255) 0c 343GH cooling:0/0xdc
-----BOARD-2-----
PSU[UNKNOWN]: 0->(270w/270w)[270 270 270] (->270w[270 270 270]) (lim=288) 0c 405GH cooling:0/0xdc
-----BOARD-3-----
PSU[UNKNOWN]: 0->(211w/211w)[211 211 211] (->211w[211 211 211]) (lim=255) 0c 355GH cooling:0/0xdc
LOOP[0] ON TO:0 (w:424)
0: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 109W 151A 80c] ASIC:[115c (125c) 1040hz(BL:1040) WN:224/0 (ffffffff) (E:193) F:0 L:0]
1: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 107W 148A 93c] ASIC:[120c (125c) 1060hz(BL:1060) WN:200/0 (ffffffff) (E:193) F:0 L:0]
LOOP[1] ON TO:0 (w:347)
2: DC2DC/1/:[vlt1:660 vlt2:664(DCl:794 Tl:664 Ul:727) 74W 111A 84c] ASIC:[120c (125c) 870hz(BL: 870) WN:170/3 (ffffffff) (E:193) F:0 L:0]
3: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:658 Ul:727) 80W 122A 95c] ASIC:[120c (125c) 910hz(BL: 910) WN:177/0 (ffffffff) (E:193) F:0 L:0]
LOOP[2] ON TO:0 (w:426)
4: DC2DC/1/:[vlt1:707 vlt2:709(DCl:719 Tl:709 Ul:727) 106W 150A 73c] ASIC:[120c (125c) 1040hz(BL:1040) WN:232/0 (ffffffff) (E:193) F:0 L:0]
5: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 112W 155A 92c] ASIC:[100c (125c) 1060hz(BL:1060) WN:194/0 (ffffffff) (E:193) F:0 L:0]
LOOP[3] ON TO:0 (w:406)
6: DC2DC/1/:[vlt1:691 vlt2:695(DCl:794 Tl:695 Ul:727) 96W 139A 87c] ASIC:[120c (125c) 970hz(BL: 970) WN:223/0 (ffffffff) (E:193) F:0 L:0]
7: DC2DC/1/:[vlt1:636 vlt2:642(DCl:794 Tl:642 Ul:727) 73W 114A 88c] ASIC:[120c (125c) 870hz(BL: 870) WN:183/0 (ffffffff) (E:193) F:1 L:0]
[H:HW:1509Gh (500),DC-W:761,L:0,A:8,MMtmp:0 TMP:(31/31)=>=>=>(72/72 , 71/71)]
Pushed 10 jobs , in HW queue 4 jobs (sw:0, hw:0)!
min:56 wins:1603[this/last min:11/14] bist-fail:155, hw-err:3
leading-zeroes:42 idle promils[s/m]:0/0, rate:978gh/s asic-count:640 (wins:8+3)
wall watts:1034
Fan:90, conseq:200
AC2DC BAD: 0 0
R/NR: 4720/0
RTF asics: 0
FET: 0:9 1:5
0 restarted 0 reset 0 reset2 0 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn
0 purge_queue3 0 bad_idle
0 err_murata
Adapter queues: rsp=1, req=24
0 err_murata
Adapter queues: rsp=1, req=240 err_murata
Adapter queues: rsp=1, req=24
Uptime:4741 | FPGA ver:100 | BIST in 147
-----BOARD-0-----
PSU[UNKNOWN]: 0->(268w/268w)[268 268 268] (->268w[268 268 268]) (lim=288) 0c 405GH cooling:0/0xdc
-----BOARD-1-----
PSU[UNKNOWN]: 0->(192w/192w)[192 192 192] (->192w[192 192 192]) (lim=255) 0c 343GH cooling:0/0xdc
-----BOARD-2-----
PSU[UNKNOWN]: 0->(270w/270w)[270 270 270] (->270w[270 270 270]) (lim=288) 0c 405GH cooling:0/0xdc
-----BOARD-3-----
PSU[UNKNOWN]: 0->(211w/211w)[211 211 211] (->211w[211 211 211]) (lim=255) 0c 355GH cooling:0/0xdc
LOOP[0] ON TO:0 (w:424)
0: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 109W 151A 80c] ASIC:[115c (125c) 1040hz(BL:1040) WN:224/0 (ffffffff) (E:193) F:0 L:0]
1: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 107W 148A 93c] ASIC:[120c (125c) 1060hz(BL:1060) WN:200/0 (ffffffff) (E:193) F:0 L:0]
LOOP[1] ON TO:0 (w:347)
2: DC2DC/1/:[vlt1:660 vlt2:664(DCl:794 Tl:664 Ul:727) 74W 111A 84c] ASIC:[120c (125c) 870hz(BL: 870) WN:170/3 (ffffffff) (E:193) F:0 L:0]
3: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:658 Ul:727) 80W 122A 95c] ASIC:[120c (125c) 910hz(BL: 910) WN:177/0 (ffffffff) (E:193) F:0 L:0]
LOOP[2] ON TO:0 (w:426)
4: DC2DC/1/:[vlt1:707 vlt2:709(DCl:719 Tl:709 Ul:727) 106W 150A 73c] ASIC:[120c (125c) 1040hz(BL:1040) WN:232/0 (ffffffff) (E:193) F:0 L:0]
5: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 112W 155A 92c] ASIC:[100c (125c) 1060hz(BL:1060) WN:194/0 (ffffffff) (E:193) F:0 L:0]
LOOP[3] ON TO:0 (w:406)
6: DC2DC/1/:[vlt1:691 vlt2:695(DCl:794 Tl:695 Ul:727) 96W 139A 87c] ASIC:[120c (125c) 970hz(BL: 970) WN:223/0 (ffffffff) (E:193) F:0 L:0]
7: DC2DC/1/:[vlt1:636 vlt2:642(DCl:794 Tl:642 Ul:727) 73W 114A 88c] ASIC:[120c (125c) 870hz(BL: 870) WN:183/0 (ffffffff) (E:193) F:1 L:0]
[H:HW:1509Gh (500),DC-W:761,L:0,A:8,MMtmp:0 TMP:(31/31)=>=>=>(72/72 , 71/71)]
Pushed 10 jobs , in HW queue 4 jobs (sw:0, hw:0)!
min:56 wins:1603[this/last min:11/14] bist-fail:155, hw-err:3
leading-zeroes:42 idle promils[s/m]:0/0, rate:978gh/s asic-count:640 (wins:8+3)
wall watts:1034
Fan:90, conseq:200
AC2DC BAD: 0 0
R/NR: 4720/0
RTF asics: 0
FET: 0:9 1:5
0 restarted 0 reset 0 reset2 0 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn
0 purge_queue3 0 bad_idle
0 err_murata
Adapter queues: rsp=1, req=24
0 err_murata
Adapter queues: rsp=1, req=240 err_murata
Adapter queues: rsp=1, req=24
Quote
2.7.1
Uptime:59458 | FPGA ver:100 | BIST in 163
-----BOARD-0-----
PSU[UNKNOWN]: 0->(266w/266w)[266 266 266] (->266w[266 266 266]) (lim=288) 0c 395GH cooling:0/0xfd
-----BOARD-1-----
PSU[UNKNOWN]: 0->(190w/190w)[190 190 190] (->190w[190 190 190]) (lim=250) 0c 341GH cooling:0/0xfd
-----BOARD-2-----
PSU[UNKNOWN]: 0->(263w/263w)[263 263 263] (->263w[263 263 263]) (lim=288) 0c 393GH cooling:0/0xfd
-----BOARD-3-----
PSU[UNKNOWN]: 0->(182w/182w)[182 182 182] (->182w[182 182 182]) (lim=250) 0c 328GH cooling:0/0xfd
LOOP[0] ON TO:0 (w:5343)
0: DC2DC/1/:[vlt1:720 vlt2:727(DCl:794 Tl:794 Ul:727) 107W 147A 74c] ASIC:[110c (125c) 1030hz(BL:1030) WN:2664/0 (ffffffff) (E:193) F:0 L:0]
1: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 108W 149A 90c] ASIC:[110c (125c) 1020hz(BL:1020) WN:2679/0 (ffffffff) (E:193) F:0 L:0]
LOOP[1] ON TO:0 (w:4435)
2: DC2DC/1/:[vlt1:666 vlt2:672(DCl:794 Tl:672 Ul:727) 80W 120A 88c] ASIC:[120c (125c) 900hz(BL: 900) WN:2260/0 (ffffffff) (E:193) F:0 L:0]
3: DC2DC/1/:[vlt1:634 vlt2:640(DCl:794 Tl:640 Ul:727) 72W 112A 90c] ASIC:[120c (125c) 870hz(BL: 870) WN:2175/0 (ffffffff) (E:193) F:0 L:0]
LOOP[2] ON TO:0 (w:5379)
4: DC2DC/1/:[vlt1:720 vlt2:727(DCl:794 Tl:794 Ul:727) 101W 139A 71c] ASIC:[115c (125c) 1000hz(BL:1000) WN:2715/0 (ffffffff) (E:193) F:0 L:0]
5: DC2DC/1/:[vlt1:724 vlt2:727(DCl:794 Tl:794 Ul:727) 112W 154A 87c] ASIC:[120c (125c) 1040hz(BL:1040) WN:2664/0 (ffffffff) (E:193) F:0 L:0]
LOOP[3] ON TO:0 (w:4276)
6: DC2DC/1/:[vlt1:650 vlt2:653(DCl:794 Tl:653 Ul:727) 73W 111A 79c] ASIC:[120c (125c) 860hz(BL: 860) WN:2232/0 (ffffffff) (E:193) F:0 L:0]
7: DC2DC/1/:[vlt1:656 vlt2:661(DCl:794 Tl:661 Ul:727) 73W 111A 82c] ASIC:[120c (125c) 840hz(BL: 840) WN:2044/3 (fffffdff) (E:187) F:0 L:0]
[H:HW:1459Gh (500),DC-W:728,L:0,A:8,MMtmp:0 TMP:(32/32)=>=>=>(72/72 , 66/66)]
Pushed 10 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:52 wins:19089[this/last min:25/21] bist-fail:357, hw-err:3
leading-zeroes:42 idle promils[s/m]:0/0, rate:1468gh/s asic-count:7936 (wins:11+14)
wall watts:990
Fan:90, conseq:200
AC2DC BAD: 0 0
R/NR: 35747/0
RTF asics: 0
FET: 0:5 1:5
0 restarted 0 reset 0 reset2 0 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn
0 purge_queue3 0 bad_idle
0 err_murata
Adapter queues: rsp=1, req=24
Uptime:59458 | FPGA ver:100 | BIST in 163
-----BOARD-0-----
PSU[UNKNOWN]: 0->(266w/266w)[266 266 266] (->266w[266 266 266]) (lim=288) 0c 395GH cooling:0/0xfd
-----BOARD-1-----
PSU[UNKNOWN]: 0->(190w/190w)[190 190 190] (->190w[190 190 190]) (lim=250) 0c 341GH cooling:0/0xfd
-----BOARD-2-----
PSU[UNKNOWN]: 0->(263w/263w)[263 263 263] (->263w[263 263 263]) (lim=288) 0c 393GH cooling:0/0xfd
-----BOARD-3-----
PSU[UNKNOWN]: 0->(182w/182w)[182 182 182] (->182w[182 182 182]) (lim=250) 0c 328GH cooling:0/0xfd
LOOP[0] ON TO:0 (w:5343)
0: DC2DC/1/:[vlt1:720 vlt2:727(DCl:794 Tl:794 Ul:727) 107W 147A 74c] ASIC:[110c (125c) 1030hz(BL:1030) WN:2664/0 (ffffffff) (E:193) F:0 L:0]
1: DC2DC/1/:[vlt1:722 vlt2:727(DCl:794 Tl:794 Ul:727) 108W 149A 90c] ASIC:[110c (125c) 1020hz(BL:1020) WN:2679/0 (ffffffff) (E:193) F:0 L:0]
LOOP[1] ON TO:0 (w:4435)
2: DC2DC/1/:[vlt1:666 vlt2:672(DCl:794 Tl:672 Ul:727) 80W 120A 88c] ASIC:[120c (125c) 900hz(BL: 900) WN:2260/0 (ffffffff) (E:193) F:0 L:0]
3: DC2DC/1/:[vlt1:634 vlt2:640(DCl:794 Tl:640 Ul:727) 72W 112A 90c] ASIC:[120c (125c) 870hz(BL: 870) WN:2175/0 (ffffffff) (E:193) F:0 L:0]
LOOP[2] ON TO:0 (w:5379)
4: DC2DC/1/:[vlt1:720 vlt2:727(DCl:794 Tl:794 Ul:727) 101W 139A 71c] ASIC:[115c (125c) 1000hz(BL:1000) WN:2715/0 (ffffffff) (E:193) F:0 L:0]
5: DC2DC/1/:[vlt1:724 vlt2:727(DCl:794 Tl:794 Ul:727) 112W 154A 87c] ASIC:[120c (125c) 1040hz(BL:1040) WN:2664/0 (ffffffff) (E:193) F:0 L:0]
LOOP[3] ON TO:0 (w:4276)
6: DC2DC/1/:[vlt1:650 vlt2:653(DCl:794 Tl:653 Ul:727) 73W 111A 79c] ASIC:[120c (125c) 860hz(BL: 860) WN:2232/0 (ffffffff) (E:193) F:0 L:0]
7: DC2DC/1/:[vlt1:656 vlt2:661(DCl:794 Tl:661 Ul:727) 73W 111A 82c] ASIC:[120c (125c) 840hz(BL: 840) WN:2044/3 (fffffdff) (E:187) F:0 L:0]
[H:HW:1459Gh (500),DC-W:728,L:0,A:8,MMtmp:0 TMP:(32/32)=>=>=>(72/72 , 66/66)]
Pushed 10 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:52 wins:19089[this/last min:25/21] bist-fail:357, hw-err:3
leading-zeroes:42 idle promils[s/m]:0/0, rate:1468gh/s asic-count:7936 (wins:11+14)
wall watts:990
Fan:90, conseq:200
AC2DC BAD: 0 0
R/NR: 35747/0
RTF asics: 0
FET: 0:5 1:5
0 restarted 0 reset 0 reset2 0 fake_wins
0 stuck_bist 0 low_power 0 stuck_pll 0 runtime_dsble
0 purge_queue 0 read_timeouts 0 dc2dc_i2c 0 read_tmout2 0 read_crptn
0 purge_queue3 0 bad_idle
0 err_murata
Adapter queues: rsp=1, req=24
I wonder whether this indicates that there is some ASIC chip damaged or not recognized because it is the only thing different that I visualize in asic stats page.
thx
