I am not showing off....I have never mined in my life!  I actually don't even know what some of this means yet.  I was very interested in crypto a few years ago but stopped following any of it for several years.  

I actually didn't know what to expect, I was seeing some people on google saying they were getting 61 MH/s out of these cards and I am only getting about 57 or 58 MH/s on each card but I wasn't sure if there was a way to get more out of the cards if you have multiple working together, or if there was anything else I should be looking at.  

I have it currently set to:

Core:  -200
Memory:  +1500
Power Limit:  160w
Minimum Fan Speed:  65%

Each card is doing about ~1150/7549 and the temps are low 50's, putting out about 57.45 MH/s for a combined 229-230.  

I guess I am pretty happy with where it is at, if everyone thinks this about what I should be expecting.  

So far it looks like it has mined 0.0428 ETH in 5 days, 196 shares at 100% with no stale or invalid.  Stability seems rock solid based on simple minings chart.  

Seems about $32/day at today's ETH price which I am pretty happy with!  It looks like it will make my electricity bill go up by about $30 per month which seems very reasonable, I was expecting way higher!  At the current ETH rates, it seems I can pull in about $943 per month.....wow!

Once ETH2 makes mining less profitable I will switch it to Raven.  We have Raven mining on another rig and we already mined 678 coins in 4 days and have 3 other rigs we are going to put on Raven as they have crappier GPUs.  

Thanks for the input everyone, Ill try to post a picture next week of some of the rigs.  

Next I am going to learn about how we can add HD's and mine chia side by side - this rig has 20 hard drive slots I believe.......  I work in IT and I am pretty sure I have stacks of spinning disks laying around.  I just donated about 100TB worth of spinning disk drives to a recycler before I knew what Chia was

Hey all, new to mining.  I have a rig which is a 4U chassis with great cooling (basically the whole chassis front to back has ventilation and powerful fans running through it, 96GB RAM, Xeon Gold CPU, 4 PSU's, and 4 RTX 2080 TI 11GB.  The rig is in an air conditioned space. 

I set it up to mine ETH with smos/metamask and wondering if the general recommendations for RTX 2080 TI change if you have a multi-GPU rig? 

For example, with 4 PSU's and increased cooling, can I crank up the overclocking a bit? 

Currently I set them all 4 to:

-200 Core MHZ
+1000 Memory
150 Power Limit
75 Target Temp
70 Minimum Fan Speed

Power is fluctuating between 148-151
MH/S is fluctuating between 55-56
Temps are fluctuating between 47-51 degrees celsius

Getting 223.24 MH/S and combined power output of about 633W. 

Any suggestions, recommendations to get the best performance out of my rig? 

Thanks!