thanks.
But the wolf_miner was only about 7% faster ...
what it should be in speed?

where to download the miner by Wolf? Or Wolf miner for Radeon???

HI.
please tell me, this is just a fork of the CPU?
where to get the fastest version of miners?
(I use a miner, who at i5-4570 produces about 80 hashes/s)
thanks.

for me is very relevant updates 32 bit version - will be a new 32-bit version?

and why I had not read your messages!  

I'm not one of these people ... I have a 32-bit miner for other's 32bit-OS   

... and whether to expect a new 32-bit miner for a happy mining?

Spexx's, why your 2 new miners (32bit & 64bit) is not loading fully processor core:
1 core only ~24% (-t 1);
2 core only ~49% (-t 2);
3 core only ~51-65% (-t 3);
4 core only ~47-65% (-t 4).
hashrate 2core > hashrate 4core > hashrate 3core - Why?
problems of parallelization process?
especially bad in 64-bit versions...

I know the command to start with a different priority, but to me it does not fit, because it opens another (separate) window cmd.exe

I did not understand correctly?
a detailed example:
All miners and almost all programs are run with the priority "normal."
But there are other programs, "Nero.exe" running with the default priority "abovenormal";
wplotsgenerator.exe starts immediately (himself) by default with lower priority.
I would like to once a miner myself run with low priority - and this can only be programmed when compiling miner.

I can not exactly count ...probably several hundred...

ha-ha.
I have a 3Mh sum with all my processors, and have a relevant question of running the miner with lower priority on all processors.

I would like to XMGpoolminerWin32, which will be launched with a lower priority "belownormal".
(For example, the so-run vplotgenerator)

deleted old post
270x (1210Mhz) - 3030kh on X11

me too: 270x - 2.93mh (with driver 14.7) ==> ~2.45Mh (with driver 14.9).

And sgminer_v5_0_mod (modded for extra hashs) up speed only ~2% on x11 do 3.02Mh

On XMG:
cpuminer_win64_magi_byMarcusDe-core2-0922 on i5-670 (default 3.46Ghz & TurboBoost 3.66Ghz) "-t 2 --benchmark" > hashrate ~22kh;
cpuminer_win64_magi_byMarcusDe-core2-0922 on Q9550 (overclocked 3.4Ghz) "-t 2 --benchmark"> hashrate ~21kh.
Really. But, i wrote about the AES. Also it is not supported, sorry... I'm correct here:
Need optimized miner for i5-670 with instruction SSE 4.2 and others , added in i5-670 after Q9550.

Example on X11:
darkCoin-cpuminer-1.3 better darkCoin-cpuminer-1.2 by ~29% on i5-670 (default 3.46Ghz & TurboBoost 3.66Ghz).
"minerd-aes-sse2-sss3.exe -t 2 --benchmark" > hashrate ~163 kh; aes-sse2-sss3: Optimized for generic processors supporting the AES-NI, SSE2 and SSSE3 instructions set.
DarkCoin-cpuminer-1.2 on i5-670 > hashrate ~132kh.

At the same time darkCoin-cpuminer-1.3 does not work on the Q9550. And Q9550 (overclocked 3.4Ghz) work only darkCoin-cpuminer-1.2 ("minerd.exe -t 2 --benchmark" > hashrate ~100 kh).

need optimized miner for i5-670 (with instruction AES).

gpuPlotGenerator-bin-win-x86-2.1.1 with 4 dll-files from AMD-14.41RC1-Win8.1-64Bit-OpenCL2-Sep19 - fast 30-35%

 
this link says "install cygwin and build it. some good instructions here for slimminer, process is the same just change the github"

I do not understand (!) how to compile cygwin for  AMD CPU

Two miners (1 - with sse2; 2 - without sse2) on CPU Q9550 is worked good on Win7_64.
Only one miner (without sse) worked on 2 virtual mashines based win_xp64 :
- on CPU i5-670
- on CPU xeon E5-2620
Possibly guilty of a virtual environment VIRTUALBOX or OS XP64. Because in the host OS win7_64 it works on i5-670.

However, on a PC with AMD Phenom X4 955 did not work 2 miners.