[2021/07/12 08:09:02] INFO: Setting freq to 50 Mhz gradually
[2021/07/12 08:09:13] INFO: Detected 256 Mb of RAM
[2021/07/12 08:09:13] INFO: Switching to manual fan control (30 %)
[2021/07/12 08:09:13] INFO: Checking fans
[2021/07/12 08:09:14] INFO: fan[0] - OK
[2021/07/12 08:09:14] INFO: fan[1] - OK
[2021/07/12 08:09:14] INFO: fan[2] - OK
[2021/07/12 08:09:14] INFO: fan[3] - OK
[2021/07/12 08:09:20] INFO: Power ON
[2021/07/12 08:09:23] INFO: Starting FPGA queue
[2021/07/12 08:09:23] INFO: Initializing hash boards
[2021/07/12 08:09:23] INFO: chain[2] - Initializing
[2021/07/12 08:09:23] INFO: chain[1] - Initializing
[2021/07/12 08:09:23] INFO: chain[0] - Initializing
[2021/07/12 08:09:38] INFO: chain[2] - 48 chips detected
[2021/07/12 08:09:39] INFO: chain[1] - 48 chips detected
[2021/07/12 08:09:42] WARN: chain[0] - 40 of 48 chips detected
[2021/07/12 08:09:53] WARN: chain[0] - 40 of 48 chips detected
[2021/07/12 08:10:05] WARN: chain[0] - 40 of 48 chips detected
[2021/07/12 08:10:05] ERROR: driver-btm-chain.c:488 chain[0] - Failed to detect ASIC chips
[2021/07/12 08:10:05] INFO: chain[0] - Shutting down the chain
[2021/07/12 08:10:05] ERROR: driver-btm-base.c:356 chain[0] - Initialization failed
[2021/07/12 08:10:09] INFO: Start-up temperature is 27 C (min -15 C)
[2021/07/12 08:10:09] INFO: Switching to manual fan control (100 %)
[2021/07/12 08:10:09] INFO: Changing voltage from 21000 to 17400 mV gradually
[2021/07/12 08:10:51] INFO: Raising freq from 50 to 500 Mhz gradually
[2021/07/12 08:11:02] INFO: Switching to manual fan control (100 %)
[2021/07/12 08:11:02] INFO: Start mining!
[2021/07/12 08:12:02] INFO: Changing voltage from 17400 to 17200 mV gradually
[2021/07/12 08:12:27] INFO: Changing voltage from 17200 to 17000 mV gradually
.




hi, so 40 chips are being detected from 48, sometimes its only 37.
https://ibb.co/V9cB8QS (image link)
so only 2 hashboards are working. is there any way i can make first one work only on 40 chips?
thanks in advance.