bought a apollo.rip , the guy is legit . THANKS !

i would like to buy bitme , do you accept paypal aswell ?

Well, they are to Affected, because :

If you Pool mine, you dont need any Bitcoin Clients Running (Except the one to receive your BTC).
If you Solo mine, you only need one Client started as "bitcoin.exe -server" and connect the Miners via IP to it.

Greetings,
frog

Mhm,

How about Using the GPU Temp Sensors for that ? Or maybe, the Southbridge Sensors.

Greetings,
Frog

Keeping them in a Case is normally  Better for Cooling, but you need Strong Fans to do so.
(Theres Better Airflow inside a case, then without) For Dust, well, Strong Fans just blow it out (and through).
Use Brushless Deltas for that Purpose. Those are Strong Industrial Fans used in Servers.

Hes Right, For mining you dont need real Bandwith (Thats why you can downclock the Memory of the Cards so much)
X1 has low Badwith, but due you dont need much, you can mine with Extender Cables on x1 too.
But you have to use cables with X1 Male and X16 Female. If not , the Card will not function properly. (Im not sure, correct me if im Wrong)

The D3 1333 is Fine with That Board.

Greetings,
Frog

Okay,

Which DDR3 is the RAM ? DDR3-XXXX ?
"Western Digital 320GB" could be anything on the Market.

Unless you use PCIE Riser Cables, you cant Add all 4 Cards to the Board, due they Are Dual Slot.
You can Add 3 then, cause the 2nd Card will hide the 3rd Slot.
Power should be enough when you downclock the Memory.

CPU is on Komp list of the Board, so should work.

Greetings, Frog

Im using 120mm Deltas at 12V, they are Loud (But not louder then the Graphics Cooler at 100%), but with
5500 RPM, they are very fast, and Push everything right out of the Case.

Greetings, Frog

157 Mhz Core is for the Cards, when they are Idle.

Start something which uses the GPU, and it clocks itself up. (Start your Miner e.g.)

For Overclocking, use either Sapphire Trixx or MSI Afterburner.

Greetings, Frog

Was einen Serverraum oder zumindest einen extra Raum nötig macht

Deltas schaffen je nach größe 5000-10000 UPM (Die 80er drehen mit 10k), das schaufelt ohne ende Luft
Der 120er den ich drin hab schaufelt auch sehr gut, und mit dem Geräusch, naja, entspricht etwa dem der Karten wenn die Lüfter auf 100% Laufen.

Ram der Karten läuft auf 200 (Weiter runter, verliere ich hashrate)

Grüße
Froggy

Yeah 0.30 € ...
I know it sucks, but mining still is profitable.

Greetings,
Frog

Hey,

Ja hab ich auch schon öfter gesehen.
Aaaber , ich hab nur vor Maximal 3 Karten pro Server einzusetzen.

Und ich hab einen Vorteil, ich hab nich einige 120mm IndustrieLüfter rumliegen

Grueße
Frog

Japp,

Für einen Freund, in einem Silverstone TJ07.
4x GTX 480. Thermisch unter Vollast eine Katastrophe.
In diesem Fall war die einzige Lösung eine Wasserkühlung.
Die in dem Fall mit ca. 800Eur zu Buche geschlagen hat.
Mein Hauptrechner hat auch eine Wakü, aber das kann ich ja nicht mit jeder Mining Rig machen, das wird zu teuer.

Grüße
Froggy

Also ich habe mich eben Gerade darüber geärgert, das sich eine meiner beiden 5870 in dem neuen Server Case (Deutlich kleiner als vorher) immer runter Taktet weil sie die 91° Marke knackt.
Vorn im Case war ein 120mm Lüfter und hinten ein 80mm, habe dann ein wenig gesucht, und einen Lüfter aus meinen  vorherigen servern gefunden (Einen 120mm Delta , der ca 5500UPM macht.)
Den hab ich nun vorne statt dem einen 120mm Lüfter eingebaut, der Luftstrom zieht so genau an den Karten vorbei nach hinten durch den 80er wieder raus.

Jetzt sind die Karten nurnoch maximal 72°C Warm

Mit den richtigen Lüftern, und dem richtigen Luftstrom, kann man einiges machen.

Grüße
Froggy

Its Running on Gas.

1KWH to buy, is around 35 Cent for us.
Generate it (Only with Gas, the Water is not in the Calculating) is around 30 Cent.

Only thing is, it Only Runs when its Cold outside, or its needed (Electricity Failure).
So in Summer, it runs not much.

Greetings

Hey,

Noise will be no Problem, due when Time has come ill build up tha Rack in a "real Serverroom" in the basement.
It will be air-conditioned and every Server will has its own fuse.
Due we have a "Dachs" http://www.senertec.de/derdachs.html (Block Heating Power Plant) in Island Operational Mode in the basement,
which means, it can run without any Power Needed to start, i dont need any USV's.

Well, and with the power consumption, well see, maybe we will be a industiral Consumer someday.
(My Brother Already founded an IT-Company)

Greetings,
Frog

Hey Guys, just wanted to Post here what i got.

Currently im going to buy a 19 Rack with around 32HU to Mount 8 Computers inside.
First Cases are on its way, and ill rebuild in the next days.

But so far,This is what i got :


Those are both PC's (Server and Main) working :


And this is my Operators Position :


Greetings From Germany,
Frog

You can Download 5870 Bioses in the Internet.
Have a Look Here : http://www.techpowerup.com/vgabios/index.php?page=1&architecture=&manufacturer=&model=HD+5870&interface=&memSize=0

Good Luck in finding the right one.

Greetings, Frog

Im here to Help , so no Problem, and i tried my best. =)

Greetings, Frog

Well, then the Board is the Problem.

Maybe you should by a new one.
Because i cant say what on or in the Board causes the Error.

Greetings,
Frog

You have to change Settings in MSI Afterburner:

Go to MSIAfterburner.cfg located in MSI Afterburner Directory.
Open It.

replace

[ATIADLHAL]
UnofficialOverclockingEULA   =
UnofficialOverclockingMode   = 0

with

[ATIADLHAL]
UnofficialOverclockingEULA   = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode   = 1

also search  for

UnlockVoltageControl           = 0
UnlockVoltageMonitoring      = 0

and replace with
UnlockVoltageControl           = 1
UnlockVoltageMonitoring      = 1

And now have fun with Overclocking

Greetings,
Frog