Latest posts of: Holldem1992

Show Posts
Pages: [1]

Bitcoin / Mining support / Re: AValon 1246 83T unstable

on: November 28, 2021, 04:48:00 AM

Quote from: Havane on November 12, 2021, 12:23:30 AM Quick news. After contacting canaan by email, they gave me a firmware. And with a command to auto-tune the frequency and voltage , it works fine at initial hashrate, with still few high temperature, but ignored. For them, "The temperature is faulty caused by the IC temperature sensor" ,but I "could ignore the issue ,because the actual temperature is almost same with nearby IC temp. " Hello! I have the same problem. Can you shared here the answer from canaan with the link and command please? Thanks

Bitcoin / Mining support / Avalon Board -40 problem

on: November 04, 2021, 06:36:45 PM

Hello, Im having a problem with 2 a1066 avalon, that on the FMS the board said -40 temp Here is the img of FMS, and here is the log. I cant understand what happend, because some times the asic restart alone and work well. But most part of the day i have this problem. Maybe 1 hour it work and then again. {'STATUS':[{'STATUS':'S','When':95,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':196,'MHS av':0.00,'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':18,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':4816456,'Stale':0,'Get Failures':0,'Local Work':3,'Remote Failures':0,'Network Blocks':1,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0} {'STATUS':[{'STATUS':'S','When':95,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':196,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1066-50-20033101_daa810f_57f076c] DNA[02010000b9abd078] MEMFREE[1380592.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[225] BOOTBY[0x02.00000000] LW[0] MH[0 0 0] HW[0] DH[0.000%] Temp[33] TMax[33] TAvg[33] Fan1[6443] Fan2[6593] Fan3[6767] Fan4[5749] FanR[100%] Vo[329] PS[0 1221 1252 99 988 1254] PLL0[0 0 0 0] PLL1[0 0 0 0] PLL2[0 0 0 0] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00 0.00] MTmax[-40 -40 -40] MTavg[0 0 0] TA[0] ECHU[1 1 1] ECMM[1] SF0[587 612 637 662] SF1[587 612 637 662] SF2[587 612 637 662] PVT_T0[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40] PVT_T1[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40] PVT_T2[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40] PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW[0 0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] WORKMODE[1]','MM Count':1,'Smart Speed':1,'Connection Overloaded':false,'Voltage Level Offset':0,'Nonce Mask':25}

Bitcoin / Mining / Water curtain and Fire suppression

on: October 28, 2021, 12:51:21 PM

Hi! Im working in one 600 s19 facility. I will work with 4 containers (150 pcs each) or 2 containers (300 pcs each) I have 2 important question about this.. The first one is about the water curtain. I see in a lot facilitys that they use it, but im afraid about humidity and water inside the equipment. Anyone can take of that fear out of me? haha And the other is, exist some automatic fire suppression system? Thanks really much!

Bitcoin / Mining / Mining container recommendation

on: October 25, 2021, 01:01:10 AM

Hello, im in a project on my country to mske one 4Mw btc farm. Im looking for mining container, ready to install around 300/400 s19 on each container. I wal looking on Google and exist a lot of suppliers with different products. Anyone have some seller to recommend? Thanks

Bitcoin / Mining software (miners) / Re: Custom firmware for avalon?

on: October 05, 2021, 04:15:48 PM

Quote from: NotFuzzyWarm on October 04, 2021, 02:49:46 PM Incorrect. The Avalon's are highly tweakable. Ref their privileged API user manual Hi! okay, the link is really good. Do you have on thread, post or other thing with recomended tweaks? Thanks

Bitcoin / Mining software (miners) / Custom firmware for avalon?

on: October 03, 2021, 01:10:51 PM

Hi people, Anyone have custom firmware for avalon asic? I have 1166 and 1246 asic, but with the original firmware we cant custom anything Thanks

Bitcoin / Mining support / Avalon 1246 with less than 70Ths

on: September 20, 2021, 01:26:59 PM

Hi, how are you? I have 6 avalon 1246 83/85ths. One of the avalon are mining less than 72 average. The 3 board are online. I paste here the log, maybe someone can help me. {'STATUS':[{'STATUS':'S','When':284,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':282,'MHS av':60487740.48,'MHS 30s':66577866.33,'MHS 1m':65645951.74,'MHS 5m':38470426.80,'MHS 15m':16642435.29,'Found Blocks':0,'Getworks':17,'Accepted':94,'Rejected':0,'Hardware Errors':0,'Utility':19.99,'Discarded':1028208,'Stale':0,'Get Failures':0,'Local Work':3923,'Remote Failures':0,'Network Blocks':1,'Total MH':17240342280.0000,'Work Utility':853679.74,'Difficulty Accepted':3801088.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':34306862,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0} {'STATUS':[{'STATUS':'S','When':284,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':283,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1246-85-21072802_4ec6bb0_211fc46] DNA[02010000ae01c3b5] MEMFREE[1238520.0] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 3 ] Elapsed[284] BOOTBY[0x05.00000000] LW[256623] MH[0 0 0] HW[0]0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] ASICCRC2[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DH[5.314%] Temp[38] TMax[82] TAvg[66] Fan1[6469] Fan2[6419] Fan3[6374] Fan4[6403] FanR[84%] Vo[339] PS[0 1218 1357 234 3175 1356 3516] PLL0[3187 6 4 10723] PLL1[6430 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10 6 7474] PLL2[5432 12 7 8469]0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 GHSspd[69286.10] DHspd[4.466%]0 0 0 0 0 0 0 0 0] CRC[0 0 0] POW_I2C[OK] FACOPTS0[] FACOPTS1[] ATAOPTS0[--avalon10-freq 396:416:436:456 --avalon10-voltage-level 33 ] ATAOPTS1[--avalon10-freq 396:416:436:456 --avalon10-voltage-level 64 ] ADJ[1] COP[0 0 0] MPO[3200] MVL[87] ATABD0[396 416 436 456] ATABD1[396 416 436 456] ATABD2[396 416 436 456] WORKMODE[1] GHSmm[72611.20] GHSavg[60640.38] WU[847136.33] Freq[434.69] Led[0] MGHS[','MM Count':1,'Smart Speed':1,'Voltage Level Offset':0,'Nonce Mask':25} Thanks

Bitcoin / Mining software (miners) / Tweak on Avalon miner

on: September 16, 2021, 05:17:26 PM

Hello, how are you? I have 6 avalon 1246 and 15 1166, all are with fabric firmware and without any overclock. I have gpu miners two, and on that we overclock evrithing haha Here with this, i dont know how to tweak it. Do anyone have some post or something to read about how to make it more eficient? Thanks

Pages: [1]