I gotcha. no worries. Im def not complaining. These Ferraris are awesome!
Since i got the Gekko hub I ramped them up (incrementally) to 550mhz. 3 were getting about 360ghs, and 1 was at 340. Which is still amazing.
and I did dial back the volt screw. but then it only got up to 520mhz. so i turned back up a bit, but not as much as I had before. its back to 550mhz, and 340ghs. So it's all good.
If only I could find more gekko hubs, Id buy some more. There is a guy in Germany selling 2 hubs on Ebay for like 1500 Euros ($1700) +$160 shipping. I offered him $500, and he told me to go F myself ¯\_ (ツ)_/¯ hopefully there in stock again soon.
I have the same issue with 1 of my stick too, but I couldnt find out which stick it was. I got 8 of them, runnin on the bitcoinmerch hub.
I thought it was the inconsistentcy of power distribution when all 4 sticks are plugged in to each of the hubs.
I run all of them at 400Mhz averaging around 250Ghs, but 1 always come down to around 115 MHz / 120GHs
Been looking for the Gekkoscience hubs on ebay as well, but havnt seen the German " Go F yourself" guy.. i hope you didnt take his suggestion
(5s):1.878T (1m):2.002T (5m):1.978T (15m):1.955T (avg):1.950Th/s
A:80339912 R:66985 HW:69440 WU:27243.6/m
Connected to sg.stratum.slushpool.com diff 2.1K with stratum as user CryptoApeKing.workerName
Block: 8d9ef614... Diff:24.3T Started: [00:59:19.435] Best share: 312M
--------------------------------------------------------------------------------
[U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
0: GSF 10050171: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 253.4G / 261.8Gh/s WU:3657.8/m
1: GSF 10050134: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 289.1G / 264.3Gh/s WU:3692.8/m
2: GSF 10050173: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 261.1G / 248.9Gh/s WU:3477.8/m
3: GSF 10050074: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 252.3G / 262.3Gh/s WU:3664.9/m
4: GSF 10050167: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 260.8G / 257.8Gh/s WU:3602.0/m
5: GSF 10050208: BM1397:01+ 300.00MHz T:115 P:249 (42:21) | 95.4% WU:^82% | 150.7G / 128.4Gh/s WU:1793.1/m
6: GSF 10050179: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 245.6G / 260.9Gh/s WU:3644.8/m
7: GSF 10050103: BM1397:01+ 400.00MHz T:400 P:400 (32:16) | 100% WU:100% | 210.3G / 265.6Gh/s WU:3710.3/m
What am I doing wrong?
I compiled cgminer from github/kanoi and it runs, however, all it seems to do is plateau adjusts and lowers the target frequency by 5MHz each time.
Sample output:
cgminer version 4.12.0 - Started: [2021-12-29 19:48:50.879]
--------------------------------------------------------------------------------
(5s):0.000 (1m):0.000 (5m):0.000 (15m):0.000 (avg):0.000h/s
A:8 R:8192 HW:0 WU:0.0/m
Connected to sha256.pool.xxxx.com diff 8 with stratum as user xxxxx
Block: 6e7f308f... Diff:92.4K Started: [19:55:26.956] Best share: 0
--------------------------------------------------------------------------------
SB management [P]ool management Settings [D]isplay options [Q]uit
0: GSF 10050211: BM1397:01 80.00MHz T:80 P:0 (160:80) | 0.0% WU: 0% | 0
.000 / 0.000h/s WU:0.0/m-------------------------------------------------------
[2021-12-29 19:58:53.824] 0: GSF 0 - set ticket to 0x00/1 work 1/1.0
[2021-12-29 19:58:54.028] 0: GSF 0 - setting bauddiv : 00 61 (ftdi/2)
[2021-12-29 19:58:54.157] 0: GSF 0 - set ticket to 0xe0/8 work 8/8.0
[2021-12-29 19:59:04.471] Stratum from pool 0 requested work restart
[2021-12-29 19:59:13.792] Stratum from pool 0 requested work restart
[2021-12-29 19:59:31.410] 0: GSF 0 - plateau adjust: target frequency 85.00MHz
-> 80.00MHz
[2021-12-29 19:59:32.686] 0: GSF 0 - CompacF Bitcoin Miner (10050211)
[2021-12-29 19:59:33.657] Stratum from pool 0 requested work restart
[2021-12-29 19:59:34.405] 0: GSF 0 - set ticket to 0x00/1 work 1/1.0
[2021-12-29 19:59:34.609] 0: GSF 0 - setting bauddiv : 00 61 (ftdi/2)
[2021-12-29 19:59:34.740] 0: GSF 0 - set ticket to 0xe0/8 work 8/8.0
[2021-12-29 19:59:53.317] Stratum from pool 0 requested work restart
Any help, please?
Can you share more details of the code you input to start the cgminer?
[moderator's note: consecutive posts merged]
Show Posts
I should have picked up the gekkoscience hubs when they were available.. 
