 Show Posts
|
|
Pages: [1]
|
could you add the hashrate speed? it usefull to monitor our rig. downloading.... thanks If you check HN API page https://www.nicehash.com/?p=api there is only possible to get 5 minute accepted and rejected speed. This data are not yet implemented in android app. You can use this windows utility to monitor your NH stats. https://www.dropbox.com/s/a4efzmutqnia324/NiceHash_stats.zipIf you toggle over unpaid ballance for certain algorithm you can see tooltip with accepted and rejected speed  |
|
|
|
the app stopped workingafter i enter my btc address
Please double check your address and internet connection. |
|
|
|
Hi this is small tool for android devices to monitor your NiceHash stats This release is optimized for small res display  It is my first android app so please be patient. Any feedback and comments are welcome. In settings you need to enter your mining address and hashrates for all algos in kH/s. You heed to hit REFRESH button to refresh stats, please keep in mind that NiceHash API is refreshed every 30 sec.    Thanks https://mega.co.nz/#!MJdQmZgL!Wx8_4Nm-E3W0t559ruJuHrWGhoE5DYnvOSZtzigjagU |
|
|
|
Hi, here is small tool to monitor NiceHash global and user stats. Change address to your NiceHash BTC wallet address and all hashrates are in kH/s. {
"address":"1Go5KGh82qTifhNYtguVsoH3buDegyVTRB",
"algos":[
{ "algo":0, "hashrate":2200},
{ "algo":1, "hashrate":0},
{ "algo":2, "hashrate":1100},
{ "algo":3, "hashrate":9500},
{ "algo":4, "hashrate":7300},
{ "algo":5, "hashrate":1000000}
]
}
Download https://mega.co.nz/#!ZMU1UQqA!6HJlq-Zh7ooBtz4XzOW10KhYTWKocw8w--APRRO5VNQIf you found this useful, please donate some bitcoins to 1CUyh5BXsTor1RRz6XTttKM4pqFmZ118r3 Added X15 and Nist5 + some minor tweeks. https://mega.co.nz/#!cQdGBIgZ!_VFDLuAw8Ai5asJKfs7CjZcSHuE5xOlNJtmvt4a0hmUUpdated https://mega.co.nz/#!wUlTHRjR!Ip08Y4ijeTspEWNO57UmA30fm0n1s2NlWu-7Vbdix4gDefault factors change X11=5.5 X13=4 Nist5=16. https://mega.co.nz/#!gJdwzY6R!IUz-XQRIEC1H-CyBnuAiMKej0EPOb-I4r2rozev_QQs |
|
|
|
Hi, here is small tool to monitor NiceHash global and user stats. Change address to your NiceHash BTC wallet address and all hashrates are in kH/s. {
"address":"1Go5KGh82qTifhNYtguVsoH3buDegyVTRB",
"algos":[
{ "algo":0, "hashrate":2200},
{ "algo":1, "hashrate":0},
{ "algo":2, "hashrate":1100},
{ "algo":3, "hashrate":9500},
{ "algo":4, "hashrate":7300},
{ "algo":5, "hashrate":1000000}
]
}
Download https://mega.co.nz/#!ZMU1UQqA!6HJlq-Zh7ooBtz4XzOW10KhYTWKocw8w--APRRO5VNQIf you found this useful, please donate some bitcoins to 1CUyh5BXsTor1RRz6XTttKM4pqFmZ118r3 Added X15 and Nist5 + some minor tweeks. https://mega.co.nz/#!cQdGBIgZ!_VFDLuAw8Ai5asJKfs7CjZcSHuE5xOlNJtmvt4a0hmUUpdated https://mega.co.nz/#!wUlTHRjR!Ip08Y4ijeTspEWNO57UmA30fm0n1s2NlWu-7Vbdix4g |
|
|
|
Hi, Anyone have configuration to R9 280X with X15 algo  Actually i have only 1.8Mh/s when i read the average on R9 280X is 2.6MH/s Could you help me Hi my settings for 3x Gigabyte R9 280X OC {
"name": "x15",
"nfactor" : "10",
"algorithm" : "bitblock",
"intensity": "18",
"gpu-engine": "1110"
},
"vectors": "1",
"worksize": "256",
"lookup-gap": "2",
"thread-concurrency": "8192",
"shaders": "2048",
"gpu-memclock": "1500",
"gpu-powertune": "-20",
"gpu-vddc" : "1.112",
...
but I'm not able to get over 2200 per card |
|
|
|
|
Hi I would like to ask what happend to my payments from today 2014-07-03.
My nicehash BTC address (1Go5KGh82qTifhNYtguVsoH3buDegyVTRB) is not listed in any of todays transactions???
thanks
|
|
|
|
Hi, here is small tool to monitor NiceHash global and user stats. Change address to your NiceHash BTC wallet address and all hashrates are in kH/s. {
"address":"1Go5KGh82qTifhNYtguVsoH3buDegyVTRB",
"algos":[
{ "algo":0, "hashrate":2200},
{ "algo":1, "hashrate":0},
{ "algo":2, "hashrate":1100},
{ "algo":3, "hashrate":9500},
{ "algo":4, "hashrate":7300},
{ "algo":5, "hashrate":1000000}
]
}
Download https://mega.co.nz/#!ZMU1UQqA!6HJlq-Zh7ooBtz4XzOW10KhYTWKocw8w--APRRO5VNQIf you found this useful, please donate some bitcoins to 1CUyh5BXsTor1RRz6XTttKM4pqFmZ118r3 Added X15 and Nist5 + some minor tweeks. https://mega.co.nz/#!cQdGBIgZ!_VFDLuAw8Ai5asJKfs7CjZcSHuE5xOlNJtmvt4a0hmU |
|
|
|
Hi, here is small tool to monitor NiceHash global and user stats. Change address to your NiceHash BTC wallet address and all hashrates are in kH/s. {
"address":"1Go5KGh82qTifhNYtguVsoH3buDegyVTRB",
"algos":[
{ "algo":0, "hashrate":2200},
{ "algo":1, "hashrate":0},
{ "algo":2, "hashrate":1100},
{ "algo":3, "hashrate":9500},
{ "algo":4, "hashrate":7300},
{ "algo":5, "hashrate":1000000}
]
}
Download https://mega.co.nz/#!ZMU1UQqA!6HJlq-Zh7ooBtz4XzOW10KhYTWKocw8w--APRRO5VNQIf you found this useful, please donate some bitcoins to 1CUyh5BXsTor1RRz6XTttKM4pqFmZ118r3 |
|
|
|
Great work Slix and Batman  will test around after work..I appreciated as a windows user  Can u give us a example of a working config with pools and profiles? this works perfect for me sgminer.exe -c nicehash.conf nicehash.conf : {
"pools" : [
{
"name" : "NH x13 multi",
"url" : "stratum+tcp://stratum.nicehash.com:4337",
"user" : "1AHDnxrDrPkP7mPNPbhx3LsQTXZuXvbFAA",
"pass" : "d=.01;f0=1;f2=.5;f3=9.5;f4=6.8;f5=750",
"profile" : "x13"
},
{
"name" : "NH x11 multi",
"url" : "stratum+tcp://stratum.nicehash.com:4336",
"user" : "1AHDnxrDrPkP7mPNPbhx3LsQTXZuXvbFAA",
"pass" : "d=.01;f0=1;f2=.5;f3=9.5;f4=6.8;f5=750",
"profile" : "x11"
},
{
"name" : "NH keccak multi",
"url" : "stratum+tcp://stratum.nicehash.com:4338",
"user" : "1AHDnxrDrPkP7mPNPbhx3LsQTXZuXvbFAA",
"pass" : "d=64;f0=1;f2=.5;f3=9.5;f4=6.8;f5=750",
"profile" : "keccak"
},
{
"name" : "NH scrypt multi",
"url" : "stratum+tcp://stratum.nicehash.com:4333",
"user" : "1AHDnxrDrPkP7mPNPbhx3LsQTXZuXvbFAA",
"pass" : "d=64;f0=1;f2=.5;f3=9.5;f4=6.8;f5=750",
"profile" : "scrypt"
},
{
"name" : "NH nscrypt multi",
"url" : "stratum+tcp://stratum.nicehash.com:4335",
"user" : "1AHDnxrDrPkP7mPNPbhx3LsQTXZuXvbFAA",
"pass" : "d=64;f0=1;f2=.5;f3=9.5;f4=6.8;f5=750",
"profile" : "nscrypt"
}
],
"include" : "profiles.conf"
}
profiles.conf : {
"profiles" : [
{
"name" : "x11",
"algorithm" : "darkcoin-mod",
"intensity" : "18",
"gpu-threads" : "2",
"gpu-powertune" : "30",
"worksize": "128",
"gpu-engine": "1040",
"gpu-memclock": "1400",
"gpu-fan": "65-100"
},
{
"name" : "x13",
"algorithm" : "marucoin-mod",
"intensity" : "18",
"gpu-threads" : "2",
"gpu-powertune" : "30",
"worksize": "256",
"gpu-engine": "1040",
"gpu-memclock": "1300",
"gpu-fan": "75-100"
},
{
"name" : "scrypt",
"intensity" : "16",
"gpu-powertune" : "10",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads": "1",
"algorithm" : "alexkarnew",
"nfactor" : "10",
"gpu-engine" : "950",
"gpu-memclock" : "1100",
"gpu-fan" : "85-100"
},
{
"name" : "nscrypt",
"intensity" : "16",
"gpu-powertune" : "10",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads": "1",
"algorithm" : "alexkarnew",
"nfactor" : "11",
"gpu-engine" : "950",
"gpu-memclock" : "1100",
"gpu-fan" : "85-100"
},
{
"name" : "keccak",
"intensity" : "14",
"gpu-powertune" : "10",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-threads": "2",
"algorithm" : "maxcoin",
"gpu-engine" : "1040",
"gpu-memclock" : "1300",
"gpu-fan" : "75-100"
}
],
"hamsi-expand-big" : "1",
"failover-only" : true,
"shaders" : "2560",
"gpu-vddc" : ".95",
"temp-cutoff" : "96",
"temp-overheat" : "94",
"temp-target" : "88",
"auto-fan" : true,
"auto-gpu" : true,
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"hotplug" : "5",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "2",
"shares" : "0",
"no-submit-stale" : true,
"no-restart" : true,
"failover-switch-delay" : "30",
"show-coindiff" : true,
"remove-disabled" : true,
"extranonce-subscription" : true
}
How the hell does this .conf not start at 100% fanspeeds? I copied this character for character straight into two .conf files, EXACTLY as badman74's. It works but fires up at 100% which is intolerable so I didn't let the mining instance continue. And I tried to add gpu-fan : 0-0 in the main profiles.conf, still 100% I would like to ask you if you have correct string in password? "d=.01;f0=1;f2=.5;f3=9.5;f4=6.8;f5=750" I think that you've mixed relative values with absolute I don't know if I understand it correctly with this string you try to say to NiceHash server that you mining rig speed is: SCRYPT = 1 Mhs, ScryptN = 0.5 Mhs, X11 = 9.5Mhs, X13 = 6.8 Mhs and Keccak = 750 Mhs |
|
|
|
Did anybody have the same issue with hashrate drop while using profiles in config file? Exactly the same parameters but speed of scrypt, scrypt-n, x11, and x13 is lower but on other side keccak speed is a bit higher with profiles. With profiles {
"pools": [
{
"name" : "NiceHash_scrypt",
"url" : "stratum+tcp://stratum.nicehash.com:3333",
"user" : "BTCaddress",
"pass" : "x",
"profile" : "scrypt"
},
{
"name" : "NiceHash_scrypt-n",
"url" : "stratum+tcp://stratum.nicehash.com:3335",
"user" : "BTCaddress",
"pass" : "x",
"profile" : "scrypt-n"
},
{
"name" : "NiceHash_X11",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "BTCaddress",
"pass" : "x",
"profile" : "x11"
},
{
"name" : "NiceHash_X13",
"url" : "stratum+tcp://stratum.nicehash.com:3337",
"user" : "BTCaddress",
"pass" : "x",
"profile" : "x13"
},
{
"name" : "NiceHash_keccak",
"url" : "stratum+tcp://stratum.nicehash.com:3338",
"user" : "BTCaddress",
"pass" : "x",
"profile" : "keccak"
}
],
"profiles": [
{
"name": "scrypt",
"algorithm" : "zuikkis",
"intensity": "13",
"nfactor" : "10",
"gpu-engine": "1100, 1055, 1055"
},
{
"name": "scrypt-n",
"algorithm" : "zuikkis",
"intensity": "13",
"nfactor" : "11",
"gpu-engine": "1100, 1055, 1055"
},
{
"name": "x11",
"nfactor" : "10",
"algorithm" : "darkcoin-mod",
"intensity": "18",
"gpu-engine": "1105"
},
{
"name": "x13",
"nfactor" : "10",
"algorithm" : "marucoin-mod",
"intensity": "18",
"gpu-engine": "1105"
},
{
"name": "keccak",
"nfactor" : "10",
"algorithm" : "maxcoin",
"intensity": "13",
"gpu-engine": "1120"
}
],
"default-profile" : "scrypt",
"auto-fan": true,
"gpu-fan": "50-100",
"temp-cutoff": "90",
"temp-overheat": "80",
"temp-target": "70",
"intensity": "18",
"vectors": "1",
"worksize": "256",
"lookup-gap": "2",
"thread-concurrency": "8192",
"shaders": "2048",
"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"gpu-dyninterval": "7",
"gpu-platform": "0",
"gpu-threads": "2",
"gpu-engine": "1105",
"gpu-memclock": "1500",
"gpu-powertune": "-20",
"gpu-vddc" : "1.112",
"log": "5",
"no-pool-disable": true,
"no-submit-stale": true,
"queue": "0",
"scan-time": "1",
"expiry": "30",
"shares": "0",
"failover-switch-delay" : "10",
"kernel-path": "/usr/local/bin"
}
Old config {
"pools": [
{
"name" : "NiceHash_scrypt",
"url" : "stratum+tcp://stratum.nicehash.com:3333",
"user" : "BTCaddress",
"pass" : "x",
"algorithm" : "zuikkis",
"intensity": "13",
"nfactor" : "10",
"gpu-engine": "1100, 1055, 1055"
},
{
"name" : "NiceHash_scrypt-n",
"url" : "stratum+tcp://stratum.nicehash.com:3335",
"user" : "BTCaddress",
"pass" : "x",
"algorithm" : "zuikkis",
"intensity": "13",
"nfactor" : "11",
"gpu-engine": "1100, 1055, 1055"
},
{
"name" : "NiceHash_X11",
"url" : "stratum+tcp://stratum.nicehash.com:3336",
"user" : "BTCaddress",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "darkcoin-mod",
"intensity": "18",
"gpu-engine": "1105"
},
{
"name" : "NiceHash_X13",
"url" : "stratum+tcp://stratum.nicehash.com:3337",
"user" : "BTCaddress",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "marucoin-mod",
"intensity": "18",
"gpu-engine": "1105"
},
{
"name" : "NiceHash_keccak",
"url" : "stratum+tcp://stratum.nicehash.com:3338",
"user" : "BTCaddress",
"pass" : "x",
"nfactor" : "10",
"algorithm" : "maxcoin",
"intensity": "13",
"gpu-engine": "1120"
}
],
"auto-fan": true,
"gpu-fan": "50-100",
"temp-cutoff": "90",
"temp-overheat": "80",
"temp-target": "70",
"intensity": "18",
"vectors": "1",
"worksize": "256",
"lookup-gap": "2",
"thread-concurrency": "8192",
"shaders": "2048",
"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"gpu-dyninterval": "7",
"gpu-platform": "0",
"gpu-threads": "2",
"gpu-engine": "1105",
"gpu-memclock": "1500",
"gpu-powertune": "-20",
"gpu-vddc" : "1.112",
"log": "5",
"no-pool-disable": true,
"no-submit-stale": true,
"queue": "0",
"scan-time": "1",
"expiry": "30",
"shares": "0",
"failover-switch-delay" : "10",
"kernel-path": "/usr/local/bin"
}
thanx |
|
|
|
Hi I have a problem with nfactor in config file {
"name" : "TMB_SCRYPT-N",
"url" : "stratum+tcp://am02.eu.trademybit.com:2220",
"user" : "user.1",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "11",
"intensity": "13",
"gpu-engine" : "1100, 1055, 1055"
},
and kernel compile gives me this Initialising kernel zuikkis.cl with bitalign, unpatched BFI, nfactor 10, n 1024 Damn, so you specify nf11 it still spits out nf10... Exactly everything id OK when I use profiles in config but then I have much lower hashrates. |
|
|
|
Hi I have a problem with nfactor in config file {
"name" : "TMB_SCRYPT-N",
"url" : "stratum+tcp://am02.eu.trademybit.com:2220",
"user" : "user.1",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "11",
"intensity": "13",
"gpu-engine" : "1100, 1055, 1055"
},
and kernel compile gives me this Initialising kernel zuikkis.cl with bitalign, unpatched BFI, nfactor 10, n 1024 |
|
|
|
|
