This is from 2miners website, it is on the "shares" tab:

Recorded shares in the recent 6 hours are displayed in the table above. If you have a significant amount of invalid shares, please check the GPU overclocking settings of your mining rig. If there are many stale shares (more than 5% of all shares), there is an issue with your internet connection. We recommend you to ping the pool with a special stratum-ping tool. When rewards are distributed according to the PPLNS scheme invalid and stale shares are not credited.

Are you using --dagintensity in the batfile? Please try v1.37

[/quote]

Hello,

I am not using --dagintensity in the bat file.

I am now in 2miners and v1.37 and this is how it looks like:

00:01:03 [2022-01-10 12:20:25.282] eth.2miners.com (ethash)    PING: 200ms    DIFFICULTY: 2.03     EPOCH: 465
00:01:03 [2022-01-10 12:20:25.282]
00:01:03 [2022-01-10 12:20:25.282]
00:01:03 [2022-01-10 12:20:25.282] ID      BOARD    TYPE    KERN    XINT    TEMP    FAN     CORE    MEM     WATT
00:01:03 [2022-01-10 12:20:25.282] GPU0    590S     OpenCL  0       512     40/0    74      1200    2100    84
00:01:03 [2022-01-10 12:20:25.282] GPU1    6800     OpenCL  0       512     0/0     0       0       0       0
00:01:03 [2022-01-10 12:20:25.282] GPU2    1660S    CUDA    2       284     59/0    60      1034    7693    65
00:01:03 [2022-01-10 12:20:25.282] GPU3    1660S    CUDA    2       284     51/0    60      1031    7693    80
00:01:03 [2022-01-10 12:20:25.282] GPU4    1660S    CUDA    2       284     54/0    60      1034    7593    74
00:01:03 [2022-01-10 12:20:25.282]                                                                          303
00:01:03 [2022-01-10 12:20:25.282]
00:01:03 [2022-01-10 12:20:25.282] ID      BOARD    HASHRATE/W    HASHRATE      AVERAGE       SHARES       RATE
00:01:03 [2022-01-10 12:20:25.282] GPU0    590S     351.37 kH/W   29.52 MH/s    28.97 MH/s    10/0/7       100.00%
00:01:03 [2022-01-10 12:20:25.282] GPU1    6800     0.00 H/W      63.89 MH/s    63.29 MH/s    27/0/12      100.00%
00:01:03 [2022-01-10 12:20:25.282] GPU2    1660S    467.83 kH/W   31.34 MH/s    31.62 MH/s    22/0/0       100.00%
00:01:03 [2022-01-10 12:20:25.282] GPU3    1660S    428.15 kH/W   34.68 MH/s    34.68 MH/s    10/0/0       100.00%
00:01:03 [2022-01-10 12:20:25.282] GPU4    1660S    456.16 kH/W   34.21 MH/s    34.21 MH/s    19/0/0       100.00%
00:01:03 [2022-01-10 12:20:25.282]                  340.70 kH/W   193.64 MH/s   192.76 MH/s   88/0/19      100.00%


Amd cards are not performing well, too many "malformed shares" =19 (not sure if the are called malformed).

Any suggestions are welcome

Windows. Cuda 11.4 build.

Hello sp_

"Out of the box" I get more mhs with v1.28 than I do with any other version (1.29,....,1.36). I cant post pictures as I am not a jr. member yet so you´ll have to believe me.

v1.28
rx 590    31.45mhs xint 24
rx 6800  63.27mhs xint 24
1660s    32.44mhs xint 284
1660s    35.38mhs xint 284
1660s    34.93mhs xint 284

v1.36
rx 590    28.84mhs xint 24
rx 6800  62.09mhs xint 24
1660s     31.70mhs xint 192
1660s     34.58mhs xint 192
1660s     34.12mhs xint 192

I guess I could mess about with xint and kernel and all the others but it is too time consuming.

Hello, three questions:

1. Is SSL implemented yet ? When I try it the miner says it is not but maybe I am doing something wrong. This is my bat file: TBMiner --algo ethash --ssl --hostname eth-de.flexpool.io --port 5555

2. When using TBM, is it better to use the high difficulty port in flexpool 14444 (I have read in this thread that it works better in high difficulty pools)

3. I cant use --lock-cclock with amd cards, can I ?

Thanks

Ok, thanks!

Can gpu's be chosen with this miner or not?

Hello,

With a rx 6800 and a rx 590 i get plenty of invalid shares on 1.31. Hashrate has also gone down with latest versions. I am back to version 1.27.

Other miners have the -d command to choose which gpus you want to use with mining. How do i choose which ones to use with this miner? Lets say i have gpu0, gpu1 and gpu2 and i want to use only gpu1 and gpu2.

By the way you miner is the only one that stable with my rx 6800. Thank you for that.

Hello,

I  have a rx 6800, voltage 650, max freq 1200, memory 2088, fast timings. Using TBM 1.27 on ethermine. I use this card as my video output, doing just some websufing while mining the video output is laggy. Youtube videos play badly. Is there anything I can do to improve video ? Will decreasing intensity with -xintensity improve video ?

Thanks!

Thank you for your answer, I see now what the meaning of the brackets are in the readme.txt. Maybe a full example at the end of the readme.txt file would save you questions like this

Also thank you for the tip, 24 is much better for my rx 6800. The miner chose 224 authomatically for the gtx 1660s but it chosed 0 for the rx 6800, I guess you are aware of that. I put 8 because a friend told me to as I was getting an insane amount of rejected shares in ethermine.

I understand there are three different miner versions for different cuda devices (11.5, 11.4,11.2). How do I know which version to use for a particular device?

Regarding older amd cards, I have several rx 590, the hashrate is similar as in TRM but the power consumption at the wall is 10w higher per card with team black. However for my rx 6800 and for the gtx 1660 team black is better than any other miner I have tried. Congrats!

Hello,

I am on TBM 1.24, I got a rx 6800 and a gtx 1660 super. If I try to set different xintensities for the cards -E 8,224 I end up having 8 for both of them. What am i doing wrong ?