By the way, you don't "need" a special plug or an outlet to have 220V.
It just have to be connected appropriately.
I have few regular 5-15 and 5-20 outlets connected to have 220V.
Now, you do have to mark them properly, so that you don't plug in your 110V stuff there:)

Eliminates the need to have to buy special PSU power cords and such.

You can always go this route to improve the layout:

https://bitcointalk.org/index.php?topic=820382

That PSU does not have the conventional C## input plug, only a proprietary IBM connector.

All of the components are available as well if you like.

About 50 dB at full speed.

You can power 24 Antminer S3s with 4 of these power supplies.

You'll need 4 hash cases and 1 PSU case to do all 24.

Most people will probably choose less than 24 to increase the PSU efficiency, as most PSUs are most efficient around 50% load.

Thanks!

First prototypes are done and deployed as of 10/6/2014.

Hash case is 4U and holds 6 Antminer S3 (as well as S3+, S1->S3 upgrade) in stock form, or 8 S1s.

If at least 34" deep racks are used then cases can be modified to hold 9 S3s or 12 S1s.

With some mods to heatsink it is possible to squeese 8 of S3s there, but I'm not sure if it is worth the effort.
Fits 8 S1s as is.

DPS-2000BB case holds 4 PSUs as well as fans and breakout boards from GekkoScience.

Hash case comes with 6 of Delta PFC1212DE fans (~250CFM each) or stock Bitmain fans as well as pass though RJ 45 connectors as shown

With stock fans temps on miners are about 20 degrees C higher, but it is doable when done with proper cooling

PSU case comes with 8 of Delta PFR0612UHE or San Ace 9GA0612P1K611 fans (~51-53 CFM each).
There's a cover for PSU case that is not shown. it covers top and side with power cords.

Final design will be powder coated black as well as some other minor changes for improved access to wiring and break out board.

Working out final bugs right now.

Pricing will depend on how many cases are ordered.

As of right now with orders for 40 hash cases it's about $250 each.
If we can get it to at least a 100 it'll be less.

I should have the details in a day or 2.

Each PSU case can power 4 hash cases (24 miners)


Pics-->

In case images don't load there are here: http://e30.us/4sale/mining/rack-mount-cases/

Please post, pm email etc.
Looking for more orders to bring the cost down.

2U PSU Case:















4U Hash case:

Thank you!

We are actually working on something like this as we speak.

Thank you!

A lot of work went into these...

Space and power requirements mostly.

Any particular hub you thinking of?

Kgb2mining and I have been working on this set up.

First prototypes are done and deployed as of 10/6/2014.

Hash case is 4U and holds 6 Antminer S3 (as well as S3+, S1->S3 upgrade) in stock form, or 8 S1s.

With some mods to heatsink it is possible to squeese 8 of S3s there, but I'm not sure if it is worth the effort.

DPS-2000BB case holds 4 PSUs as well as fans and breakout boards from GekkoScience.

Hash case comes with 6 of Delta PFC1212DE fans (~250CFM each) or stock Bitmain fans as well as pass though RJ 45 connectors as shown

With stock fans temps on miners are about 20 degrees C higher, but it is doable when done with proper cooling

PSU case comes with 8 of Delta PFR0612UHE or San Ace 9GA0612P1K611 fans (~51-53 CFM each).
There's a cover for PSU case that is not shown. it covers top and side with power cords.

Final design will be powder coated black as well as some other minor changes for improved access to wiring and break out board.

Working out final bugs right now.

Pricing will depend on how many cases are ordered.

I should have the details in a day or 2.

Each PSU case can power 4 hash cases (24 miners)


Pics-->

In case images don't load there are here: http://e30.us/4sale/mining/rack-mount-cases/

Questions, comments etc are all welcome.

2U PSU Case:















4U Hash case:

I have 12 S1 boards available @$185 shipped for all 12 in continental US.

Send me a PM.

Thanks,
Alex.

Anyone who's got these boards willing to sell me one of several?

BTC or paypal.

Please PM me.

Thanks,
Alex.

Sure, given enough demand it is possible.

What's the fee?

Can't seem to find it anywhere...

Calculated it seems to be around 3%.

Is this correct?

I'm not sure if you saw this:

https://bitcointalk.org/index.php?topic=675068.0

4U case, houses 8 S1 or S3 blades with 2 PSUs and 120 or 120/80 mm fans.

Can't see pics, post a link to auction?

I don't know where the port is on the new boards, so it makes no sense to try to guess.
Once S3s start shipping it'll be pretty clear.

Here's the implementation of the above for the S3.

Also can be for S1.

https://bitcointalk.org/index.php?topic=681059

I've made another post for 6 blade S3 case, please go there with any questions etc:

https://bitcointalk.org/index.php?topic=681059

As requested by some members here, this is a 6 blade case, 2 of these is to be used with one DPS-2000BB between them.
Bracket for DPS-2000BB is in the works.  

6 S3 Blade (3 Antminer S3 units) enclosure with 120mm (stock) fans:



PRICING for the S3 enclosure in a pic above:
Shipping from NY, 12065

1-9 units: -----$200/each plus shipping
10-49 units: ---$175/each plus shipping
50-100 units: --$155/each plus shipping

For higher than 100 qty please email (alexdotshchipkovatgmaildottttcom) or PM me.

I can accept paypal or BTC.
Paypal is preferred at this point as I have to pay machine shop with $$.
Please add 3% for paypal payments unless it is a no fee payment.

Paypal payments to above email address.
BTC: 14fhQLB8XT6WdiULGZTXt9XpeoKTN7a3eb

Lead time 3 weeks for production.