I received my 3080 12GB FTW EVGA Card.

By default it mines ETH at exactly 61.41 MH/s

I don't think it is being recognized as a LHR card.

To force LHR I tried  --lhr-tune  74
But it never settled and kept hunting for a good hash rate.


Next I tried duel mining
As you can see below the card "GPU #3: EVGA RTX 3080 “

----------------------20220122 10:52:12 -----------------------
Mining at us1.ethermine.org:4444 [172.65.218.238], diff: 4.29 G
GPU #0: EVGA RTX 3090     - 122.39 MH/s, [T:48/96C, P:296W, F:82%, E:415kH/W], 3/3 R:0%
GPU #1: RTX 3080          -  93.29 MH/s, [T:56/104C, P:217W, F:87%, E:430kH/W], 4/4 R:0%
GPU #2: Gigabyte RTX 3090 - 122.58 MH/s, [T:49/98C, P:306W, F:94%, E:402kH/W], 4/4 R:0%
GPU #3: EVGA RTX 3080     -  61.50 MH/s, [T:57/76C, P:321W, F:81%, E:192kH/W], 1/1 R:0%
Hashrate: 399.77 MH/s, Shares/min: 3.919 (Avg. 3.38), Avg.P: 1138W, Avg.E: 351kH/W
Uptime: 3 mins 34 secs | Algo: ethash | T-Rex v0.24.8
WD: 3 mins 35 secs, shares: 12/12


-------------------------20220122 10:52:12 --------------------------
Mining at stratum-ergo.flypool.org:3333 [172.65.247.17], diff: 4.00 G
GPU #0: EVGA RTX 3090     - 0.00 H/s, [T:48/96C, P:296W, F:82%, E:0.00H/W]
GPU #1: RTX 3080          - 0.00 H/s, [T:56/104C, P:217W, F:87%, E:0.00H/W]
GPU #2: Gigabyte RTX 3090 - 0.00 H/s, [T:49/98C, P:306W, F:94%, E:0.00H/W]
GPU #3: EVGA RTX 3080     - 0.00 H/s, [T:57/76C, P:321W, F:81%, E:0.00H/W]
Hashrate: 0.00 H/s, Shares/min: 0, Avg.P: 1138W, Avg.E: 0.00H/W
Uptime: 3 mins 34 secs | Algo: autolykos2 | T-Rex v0.24.8

Is there anything else I can try or simply wait for the new versions of Trex for supporting this card in the future.