Hello,

I cant seem to get my avalon 3 with avalon 2 module working connected to a raspberry pi. I get this specific error

[Firmware Version] => 20140526
cgminer: 444d457
cgminer-openwrt-packages: b7b7afe
luci: b66161d
Socket connect failed: Connection refused

I read this was most likely a network configuration error. I checked all my settings and everything is fine. I ran the ping and as you can see the results are ok.

PING google.com (167.206.145.182): 56 data bytes
64 bytes from 167.206.145.182: seq=0 ttl=59 time=12.840 ms
64 bytes from 167.206.145.182: seq=1 ttl=59 time=9.882 ms
64 bytes from 167.206.145.182: seq=2 ttl=59 time=9.847 ms
64 bytes from 167.206.145.182: seq=3 ttl=59 time=8.489 ms
64 bytes from 167.206.145.182: seq=4 ttl=59 time=8.332 ms

--- google.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 8.332/9.878/12.840 ms

I also factory reset the units a couple of times just to be sure, and to my surprise still the same error.

I also thought it might be a powersupply problem. I put 2 powersupplies from one of my antminer s2 setups, and still the same problem. I also bought a new psu. Still the same issue (Thinking it may a module powering issue), but fans are spinning and power leds are up.

The Avalon 3 to avalon 2 module is connected to a usb hub that has a seperate psu and is the sold on ehash. I also tried to connect it directly to the Raspberry pi.

Definitely need help on this one.