Show Posts
|
Pages: [1] 2 3 4 5 6 7 »
|
I can't explain it. For some people the device works without problems, for others, it doesn't. What could be the reason for this? Has the design of some devices been changed, different chips used or something similar?
Hello, please feel free to contact us if there is any problem. customerservice@canaan.io
|
|
|
Thank you for your feedback and we will forward it to our tech team and get back to you with the solution.
That's very much appreciated! and BTW: Last session uptime was + 28 hrs uninterupted mining with an extra fan for more airflow, so there is hope! Hello, do you mean you added an extra fan for the Nano3?
|
|
|
One of my brand new out of the box Nano 3's won't run on high even with Canaan factory PSU. Switched PSU's with one of the others yielded the same result. It's not the PSU so it must be something else in the hardware. It does run on medium all day and night however... I found that sometimes AN3 just won't let itself set to 'High' even after running om 'high' for a while it turns out it has suddenly has thrown itself offline I then notice it's mining on 'Low' ... If that's the case (ie. AN3 going by itself form 'High' to 'Low') there's no way to get it back to 'High' but to either pull powercord **) or using 'AvalonNano3RecoveryPackage' complete reset to get it to go to 'High.' For me the Avalon Nano 3 is a very unstable device: Besides from random disconnects the biggest issue is that: Avalon Nano 3 always refuses to reconnect to last configured wifi after reboot (w/static IP)It's been "a battle" using the AN3 since I got it about a week ago, somehow the FW seems very unstable: - AN3 logs off intermittently /throwing itself 'off' the net for whatever reason where reboot/power off is only option.
- Now also fan spinning out of control
- After reboot I'm forced to go through initial wifi-setup to be able to resume mining
Text: The worst thing is the pain that comes with the fact that every change in setup needs a reboot. BUT, doing a reboot the AN3 then demands that I go through 'First time setup' again - every time!!! - because it can't re-connect to same net previous setup by me Even after no errors when just turning it 'Off' the Avalon Nano 3 refuses to connect to last used network by itself after reboot. No way, never done it even once! But at same time the AN3 can run for +18 to 24 hrs without any errors (aot this tells me it's not the PU (USAMS 140W USB-C 3.1) causing errors) Temp is 50/90 *C =pretty normal (**: which leads to having to go through setup again because it't won't reconnect back to previous setup wifi Thank you for your feedback and we will forward it to our tech team and get back to you with the solution.
|
|
|
Agree 100% with what was stated above all the tools and firmware versions really need to be placed in the support portal on the Canaan website...
Hello, pls check it out on our official website. https://www.canaan.io/supports/file_downloadThe one issued on Aug 6th is the latest version, kindly note.
|
|
|
@OP - good to see Canaan started a support thread for the Nano & Merit given for it. Here is link to quoted issue that the author started earlier. [/quote] Thank you for being so supportive, we are always here to support our customers Please let us know if you have any questions related to Avalon Nano3
|
|
|
Dear all If you have questions related to Nano3, you can share them here. We will collect questions and provide timely feedback to our team. Thank you for your support.
|
|
|
The nano 3 is pretty good.
Not perfect but decent.
I have 2 of them. I run them on medium
If they were to take 1 board from the a1446 model
make it do 3 speeds and use a 120/240 volt psu it would sell to USA home miners.
A 400 - 600 - 800 watt miner simple plug and play.
Wow, you bought it from our shop? We will have an event for the July 4th soon, stay tuned.
|
|
|
Dear all Avalon Nano3 is available at our Canaan Shop https://shop.canaan.io/collections/avalon-nanoNet Dimensions 205mm*115mm*57mm Net Weight ≈725g Input Voltage 28V Power Consumption 140W(Max) Hertz 50/60Hz Hashrate 4T/ 29J Air Outlet Temperature 40℃ - 60℃ Noise 33~36dB The ETD will be after June. First pay, First ship.
|
|
|
Dear all Happy New Year! Hope this post finds you well and may the mining of BTC fill your pocket in 2024 There’s no denying that 2023 has been a difficult year for Bitcoin, we are truly thankful for your continued support, and let's look forward to the Bitcoin halving and the arrival of the bull market in 2024. With the new year coming, we would like to sincerely recommend our new product to you, Avalon Nano 3. Avalon Nano 3 is a portable small heater that can generate Bitcoin. It is developed and produced by the NASDAQ-listed company Canaan Inc. and belongs to the Avalon product line. Think about all our confusion during winter: fresh steaming tea cools down in a minute; got cold hands and feet in front of the computer all the time, staring at the ceiling before going to bed and feeling like lacking warm vibes. Well, guess what? With Avalon Nano 3, all the troubles in winter are readily solved, and you can obtain a warm and unique little world of your own. Not to mention, the best part is the continuous BTC revenue during this process! Feeling unbelievable? This is Avalon Nano 3. Stretch your cold fist:) $0.12/day is all you need (*based on the average US residential electricity price) Plug, heat, and earn $0.3 each day If you want to know more about Avalon Nano 3, please click on https://shop.canaan.io/products/avalon-nano-3?VariantsId=10282
|
|
|
IS there a list or can people post legit companies they have dealt with on this forum? You can always trust our Canaan Shop Brand new with 360 days warranty.
|
|
|
Dear all Who will attend the BlockChain Life 2023? We will be there on Oct24th and Oct25th Let's talk soon.
|
|
|
Dear All All Avalon miners are on a big sale https://shop.canaan.io/And we do have a special offer for bulk orders. Please feel free to contact us for the updated quotation.
|
|
|
Dear All All miners in our U.S. warehouse are on clearance sale. Please feel free to contact us for a quotation. Email: coco@canaan.ioWe are always here to support you. Feel free to contact us at any time.
|
|
|
Dear All All miners in our U.S. warehouse are on clearance sale. Please feel free to contact us for a quotation. We are always here to support you.
|
|
|
Dear all, our Avalon Miners are on a big sale! Please feel free to contact us for a special offer.
|
|
|
The Bot seems annoying sometimes
|
|
|
Feel free to contact us for quoting Avalon Miner
|
|
|
90T is on a big sale, only $9/T, please feel free to send us an inquiry about Avalon miners.
|
|
|
Hi there, thanks for choosing our Avalon miners A1166 Pro-81T, now we have A13 series available, stay tuned
|
|
|
|