 Show Posts
|
|
Pages: [1]
|
I tried just about everything but can't get X15 to work properly.
It works fine on my R9 270X but not on my older 6990 cards.
You need to use bitblockold kernel and make sure your worksize is not 256, it has to be 64 or 128. |
|
|
|
the version called NEW3 (downloaded yeaterday), works fine for me on 2 PCs - with 5850/6970 inside x13modold/bitblockmodold For x13 I even get higher speed than lasybear builds I use different drivers, but put 14.6 ocl binaries in sgminer folder... I can even post bin files for 5850/6970 ? But I have 1 relatively big problem - miner Always starts with Intensity 12... -I in bat file or "intensity" in conf file don't work  Another problem... no way to use x13mod if in the system is present an older radeon "remove-disabled" : true, is in conf file but it still tries to build bin file... and fails.Someone who can share bin file for 290? Hey, thanks for the info. I can't find NEW3 build or x13modold kernel from anywhere, do you have url? Also bin files could work, though I have 5870 and 5830 cards. |
|
|
|
I'm still getting errors and no work done on 5000 series cards (Cypress). 6000 series and above work fine. Should I use other kernel than bitblockold ? Thanks. Does you card works with x13modold or marucoin-modold ? marucoin-modold gives error -11 when building binary. I can't seem to be able to find x13modold kernel Tested with 5830, 5870 with 2 different rigs. Win 7 64bit cata 14.4 and 14.6 beta. I also got the same problem with this versions..using same config from the v5 prerelease, what was working fine. It doesn't matter which binary it is building, marucoinmod-old or darkocoinmod etc. You have a working v5 release? Do you have a dl link? |
|
|
|
I'm still getting errors and no work done on 5000 series cards (Cypress). 6000 series and above work fine. Should I use other kernel than bitblockold ? Thanks. Does you card works with x13modold or marucoin-modold ? marucoin-modold gives error -11 when building binary. I can't seem to be able to find x13modold kernel Tested with 5830, 5870 with 2 different rigs. Win 7 64bit cata 14.4 and 14.6 beta. |
|
|
|
I'm still getting errors and no work done on 5000 series cards (Cypress). 6000 series and above work fine. Should I use other kernel than bitblockold ? Thanks. |
|
|
|
|
Hey
I can't get Radeon 5000 series card to work with bitblock or bitblockold kernels. 6000 Series works with bitblockold however.
The miner hashes but gets no work done and some hw errors are seen. Any idea whats the issue ?
Using cata 14.4 and 14.6 and several different cards.
|
|
|
|
I'm getting hw errors when mining x15 with Radeon 5000 series cards. 7000 series and 280x work fine with sgminer beta. Anyone have any ideas on this issue? The 5000 series hash, but get only hw errors and no accepted work results I got an old HD5450 going with sgminer 4.1.0 and 14.6RC2 (sgminer v5 beta did NOT work on same card with X15): X11.bat @echo off
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
sgminer.exe -c X11.conf
X11.conf {
"pools" : [
{
"quota" : "100;stratum+tcp://pool1.us.multipool.us:3375",
"user" : "blahblah",
"pass" : "x"
}
]
,
"kernel" : "x11mod",
"intensity" : "17",
"vectors" : "1",
"worksize" : "64",
"lookup-gap" : "2",
"thread-concurrency" : "448",
"shaders" : "80",
"gpu-engine" : "680-860",
"gpu-fan" : "100-100",
"gpu-memclock" : "620",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "90",
"failover-only" : true,
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : false,
"load-balance" : true,
"queue" : "0",
"scan-time" : "60",
"scrypt-vert" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"load-balance" : true,
"kernel-path" : "/usr/local/bin",
"no-client-reconnect" : true
}
Getting 93 KHs X11 sgminer 4.1.0No HW errors. Shares are being accepted  Interestingly the x11mod kernel compiled with sgminer v5 beta was a darkcoin-mod bin not x11mod bin so dumping optimized x11mod.cl into v5 kernel directory has no effect with v5. Seems that v5 maps x11mod to darkcoin-mod I tried deleting darkcoin-mod.cl and renaming x11mod.cl to darkcoin-mod.cl but compile fails  However putting it in 4.1.0 kernel directory definitely works His miner works on Radeon 6000 series if I use the bitblockold kernel, but it does not work with 5000 series. Did you get your 5450 card to work with x15 ? |
|
|
|
I'm getting hw errors when mining x15 with Radeon 5000 series cards. 7000 series and 280x work fine with sgminer beta. Anyone have any ideas on this issue? The 5000 series hash, but get only hw errors and no accepted work results |
|
|
|
Hello I created 14.6 bins for people running 14.4 drivers on their miner. On my R9 280X this boosts the 14.4 from 2.12mh/s to 2.48mh/s per card. 1150/1500 1.200mV https://app.box.com/s/vn3wm9ru3nqua2z3gt6d see new post below Enjoy. My Gigabyte Radeon 280x had 1.7mh/s and after you bin it went to 1.9mh/s. Its still pretty low. Settings: -g 2 -w 256 -I 18 --thread-concurrency=8192 --gpu-engine=1090 --gpu-memclock=1300 My 5870 rig doesn't seem to work. The miner hashes but gets no accepted work with hw errors. Its funny that 7870 right (same kind) works fine giving 640mh/s per card. Using 14.4 cata. Any ideas? Make sure you use the newer bin I posted and add "hamsi-expand-big 1" (credit goes to Bullus for hamsi tip)https://app.box.com/s/dh6atjhm74u7r29famvg see new post below My config sgminer.exe --algorithm bitblock -o stratumserver -u xxx -p xxx -I 18 -w 128--thread-concurrency 8192 --lookup-gap 2 -g 2 --gpu-engine 1150 --gpu-memclock 1500 --no-submit-stale --no-pool-disable --hamsi-expand-big 1 Getting 2.1mh/s now, thanks. Its a bit better Still cant figure out why 5870s wont work... |
|
|
|
My Gigabyte Radeon 280x had 1.7mh/s and after you bin it went to 1.9mh/s. Its still pretty low. Settings: -g 2 -w 256 -I 18 --thread-concurrency=8192 --gpu-engine=1090 --gpu-memclock=1300 My 5870 rig doesn't seem to work. The miner hashes but gets no accepted work with hw errors. Its funny that 7870 (same kind) works fine giving 640mh/s per card. Using 14.4 cata. Any ideas? |
|
|
|
|
Hello
I'm having some problems trying to mine UTC.
I have Radeon 280x, 7870, 6950 and 5870 cards and they all give hw errors.
Tried yacminer 3.5 and ultracoinminer from their site with different settings and all I get is errors while hash rate changes a bit.
yacminer.exe --scrypt-chacha x --nfmin 4 --nfmax 30 --starttime 1388361600 -R 8000 -g 1 -w 128 --buffer-size 2656 --lookup-gap 3
ultracoinminer.exe --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --lookup-gap 4 --thread-concurrency 8192 -g 1 -I 12 -w 128
Both of these give errors and changing the settings wont help. Does this require a specific catalyst version or am I missing something?
Thanks for all and any help.
|
|
|
|
|
