Show Posts
|
Pages: [1]
|
You can merge mine AEON and FCN together:
1. Get Aeon and Fantomcoin wallets and create addresses. (simplewallet --generate-new-wallet=aeon_wallet.bin --pass=incorrect) You need separate address for each coin.
2. Launch aeond and fantomcoind daemons (aeond --rpc-bind-ip 0.0.0.0 for Aeon) and let it sync. In daemon window type "save".
3. Go to Fantomcoin folder and run:
minerc --node1=aeon_host_ip_address:11181 --node2=fcn_host_ip_address:24081 --wallet1=aeon_address --wallet2=fcn_address
4. Profit!
hI, What I should use for host ip address? Thank you
|
|
|
[2014-07-29 16:44:07] GPU #3: GeForce GTX 750 Ti, 81983 khash/s [2014-07-29 16:44:07] GPU #1: GeForce GTX 750 Ti, 83060 khash/s [2014-07-29 16:44:07] GPU #0: GeForce GTX 750 Ti, 82335 khash/s [2014-07-29 16:44:07] GPU #2: GeForce GTX 750 Ti, 81466 khash/s [2014-07-29 16:44:07] GPU #5: GeForce GTX 750 Ti, 81053 khash/s [2014-07-29 16:44:07] GPU #4: GeForce GTX 750 Ti, 80631 khash/s
Recipe: Take djm's Doomcoin code, compare hash to target and return if good at the end of the luffa kernel instead of saving hash outputs to global memory, then reading them back for comparison in another kernel. I did it in the version I use but I didn't get any speed up (reason why I didn't upload it). need to check what I did... (anyhow I didn't see a block since a couple of hour now...) edit: My version is still saving the hash though... Yep, the global write might just be the thing holding it back. I'm getting hell of a lot of "submit_upstream_work stratum_send_line failed" and "reject reason: Job 'e585' not found" though, but I can't see how that would be related to the mod. Guess the suprnova stratum is starting to choke as load increases. Doesn't help that there's only one port configured for an extremely low starting diff looking from a GPU point of view. I tried to remove it but that doesn't change anything for me: 66MH on the 750ti with a power usage of 95% (was 99% before) Weird, I'm fairly certain I didn't really change anything else or compile with the --yo-dawg-gimme-plus-40-percent-hashrates switch Color me confused. Do you know how much CPU power GPU nvminer use? I have 12 core CPU, how many cores I should run with miner? Thank you
|
|
|
Stage 3 has just begun!10M were allocated to Stage 2, of which 4.24M SPA were given away and 5.76M have just been destroyed by sending to address SPAXXXXXXXXXXXXXXXXXXXXXXXXXRnqdYt. The last 10M of the premine have been allocated to Stage 3, which begins now and will last till early to mid-september. Half of the remaining coins after stage 3 will be allocated to stage 4. The other half will be destroyed. We're on our way to completing what has been possibly the most fair premine distribution ever. Detailed schedule: ( SpainCoin Blog) Great job, Devs proof a dedication again and again Rare these days. I have a complain for spa.coinspool.org. I've mined on pool for days. I can not withdraw coins - I'm NOT getting VERIFICATION EMAIL. I contacted pool numerous times in past 2 weeks - NO ANSWER. Also would be nice to delete not working pools on first page Thank you, keep good job! Date Registered: 21:43:57, 10 July 2014 I'm not complaining about Coin or devs - both are really GOOD! I have a complain for spa.coinspool.org
|
|
|
Stage 3 has just begun!10M were allocated to Stage 2, of which 4.24M SPA were given away and 5.76M have just been destroyed by sending to address SPAXXXXXXXXXXXXXXXXXXXXXXXXXRnqdYt. The last 10M of the premine have been allocated to Stage 3, which begins now and will last till early to mid-september. Half of the remaining coins after stage 3 will be allocated to stage 4. The other half will be destroyed. We're on our way to completing what has been possibly the most fair premine distribution ever. Detailed schedule: ( SpainCoin Blog) Great job, Devs proof a dedication again and again Rare these days. I have a complain for spa.coinspool.org. I've mined on pool for days. I can not withdraw coins - I'm NOT getting VERIFICATION EMAIL. I contacted pool numerous times in past 2 weeks - NO ANSWER. Also would be nice to delete not working pools on first page Thank you, keep good job!
|
|
|
for me 2.5-3,
but I m out there is no point anymore coin is mined too much by now.
I must confess, if there had been a huge instamine, I would not have released the miner so fast. I was tricked by someone who said he was about to release (while he had only whirlpool.cl) (but with a gpu solo I didn't made a lot either... (9k in 5~6 hours... during the afternoon ) I use ccminer win version for Nvidia downloaded from MEGA link. It stops at: stratum found new block. I use following config: ccminer -a whirlcoin -q -o stratum+tcp://erebor.dwarfpool.com:3358 -u WALLET -p x I removed -q (with -q enabled stopped at thread 1) I tried -f256 with no result. Any suggestions? Thank you ☺ use this exe, the previous one didn't support pool stratum (while it is the one of x11 and some others) https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc Great job! Thank you . Pools I have tried at that moment had problems. I'm getting 3.9Mhs running MSI GTX750 TI on Moria dwarfpool
|
|
|
for me 2.5-3,
but I m out there is no point anymore coin is mined too much by now.
I must confess, if there had been a huge instamine, I would not have released the miner so fast. I was tricked by someone who said he was about to release (while he had only whirlpool.cl) (but with a gpu solo I didn't made a lot either... (9k in 5~6 hours... during the afternoon ) I use ccminer win version for Nvidia downloaded from MEGA link. It stops at: stratum found new block. I use following config: ccminer -a whirlcoin -q -o stratum+tcp://erebor.dwarfpool.com:3358 -u WALLET -p x I removed -q (with -q enabled stopped at thread 1) I tried -f256 with no result. Any suggestions? Thank you ☺ use this exe, the previous one didn't support pool stratum (while it is the one of x11 and some others) https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc I'm using one from the link, same result - I also reinstall Visual C++ x86 , did nothing still stuck on: stratum found new block
|
|
|
for me 2.5-3,
but I m out there is no point anymore coin is mined too much by now.
I must confess, if there had been a huge instamine, I would not have released the miner so fast. I was tricked by someone who said he was about to release (while he had only whirlpool.cl) (but with a gpu solo I didn't made a lot either... (9k in 5~6 hours... during the afternoon ) I use ccminer win version for Nvidia downloaded from MEGA link. It stops at: stratum found new block. I use following config: ccminer -a whirlcoin -q -o stratum+tcp://erebor.dwarfpool.com:3358 -u WALLET -p x I removed -q (with -q enabled stopped at thread 1) I tried -f256 with no result. Any suggestions? Thank you ☺
|
|
|
That is right. We all should be a GOOD part of Crypto community, we should pull together as a team. There is no need for anger. Think of 2 positives for each negative one
|
|
|
|