Hey guys,

Just bought a second hand S19j Pro, when it fires up it shows all 3 hashboards as good in the bitmain firmware page. After about 1 minute of no hashing it resets itself and only has hashboard 1 and 3 showing and will start hashing and come online in the pool.

Here is the kernel log.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #36 SMP Mon Dec 26 17:10:49 CST 2022
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768
[    0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 245400k/245400k available, 16744k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc053f674   (5342 kB)
[    0.000000]       .init : 0xc0540000 - 0xc0571680   ( 198 kB)
[    0.000000]       .data : 0xc0572000 - 0xc05d9ee0   ( 416 kB)
[    0.000000]        .bss : 0xc05d9ee0 - 0xc0630448   ( 346 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000347] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015447] pid_max: default: 32768 minimum: 301
[    0.015674] Security Framework initialized
[    0.015767] Mount-cache hash table entries: 512
[    0.024263] Initializing cgroup subsys cpuacct
[    0.024296] Initializing cgroup subsys memory
[    0.024358] Initializing cgroup subsys blkio
[    0.024491] CPU: Testing write buffer coherency: ok
[    0.024994] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025068] Setting up static identity map for 0x8030a500 - 0x8030a54c
[    0.026425] Brought up 1 CPUs
[    0.026449] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.027728] devtmpfs: initialized
[    0.091392] pinctrl core: initialized pinctrl subsystem
[    0.091641] rstctl core: initialized rstctl subsystem
[    0.092107] regulator-dummy: no parameters
[    0.092608] NET: Registered protocol family 16
[    0.093269] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.102685] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.102863] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.103914] platform 49000000.edma: alias fck already exists
[    0.103946] platform 49000000.edma: alias fck already exists
[    0.103971] platform 49000000.edma: alias fck already exists
[    0.105097] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.105321] OMAP GPIO hardware version 0.1
[    0.106653] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.107962] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.109424] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.109944] of_get_named_gpio_flags exited with status 52
[    0.109973] gpio-rctrl rstctl.3: loaded OK
[    0.114847] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.118110] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.120008] cpsw.0: No hwaddr in dt. Using c4:f3:12:00:34:65 from efuse
[    0.128910] bio: create slab <bio-0> at 0
[    0.140324] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.140608] of_get_named_gpio_flags: can't parse gpios property
[    0.140833] vmmcsd_fixed: 3300 mV
[    0.143935] SCSI subsystem initialized
[    0.145167] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.145201] omap_i2c 4819c000.i2c: unable to select pin group
[    0.145432] pps_core: LinuxPPS API ver. 1 registered
[    0.145448] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.147023] Switching to clocksource gp_timer
[    0.164239] NET: Registered protocol family 2
[    0.165297] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.165385] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.165479] TCP: Hash tables configured (established 2048 bind 2048)
[    0.165572] TCP: reno registered
[    0.165598] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.165642] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.166051] NET: Registered protocol family 1
[    0.166614] RPC: Registered named UNIX socket transport module.
[    0.166689] RPC: Registered udp transport module.
[    0.166705] RPC: Registered tcp transport module.
[    0.166718] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.167104] Trying to unpack rootfs image as initramfs...
[    1.064704] Freeing initrd memory: 6496K
[    1.065424] CPU PMU: probing PMU on CPU 0
[    1.065457] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.065961] omap2_mbox_probe: platform not supported
[    1.069661] VFS: Disk quotas dquot_6.5.2
[    1.069908] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.071280] NFS: Registering the id_resolver key type
[    1.071371] Key type id_resolver registered
[    1.071386] Key type id_legacy registered
[    1.071452] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.071888] msgmni has been set to 491
[    1.074654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.074680] io scheduler noop registered
[    1.074695] io scheduler deadline registered
[    1.074754] io scheduler cfq registered (default)
[    1.078395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.080651] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.080803] of_get_named_gpio_flags: can't parse gpios property
[    1.081098] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    1.701998] console [ttyO0] enabled
[    1.706277] of_get_named_gpio_flags: can't parse gpios property
[    1.706524] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    1.714944] of_get_named_gpio_flags: can't parse gpios property
[    1.715163] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    1.723591] of_get_named_gpio_flags: can't parse gpios property
[    1.723806] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    1.732201] of_get_named_gpio_flags: can't parse gpios property
[    1.732422] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    1.754298] brd: module loaded
[    1.764595] loop: module loaded
[    1.768675] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    1.778733] ONFI param page 0 valid
[    1.782434] ONFI flash detected
[    1.785756] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[    1.797680] omap2-nand: detected x8 NAND flash
[    1.802347] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.807932] omap2-nand: using custom ecc layout
[    1.812784] 12 ofpart partitions found on MTD device omap2-nand.0
[    1.819179] Creating 12 MTD partitions on "omap2-nand.0":
[    1.824860] 0x000000000000-0x000000020000 : "spl"
[    1.831564] 0x000000020000-0x000000040000 : "spl_backup1"
[    1.838930] 0x000000040000-0x000000060000 : "spl_backup2"
[    1.846216] 0x000000060000-0x000000080000 : "spl_backup3"
[    1.853531] 0x000000080000-0x000000240000 : "u-boot"
[    1.861809] 0x000000240000-0x000000260000 : "bootenv"
[    1.868821] 0x000000260000-0x000000280000 : "fdt"
[    1.875407] 0x000000280000-0x000000780000 : "kernel"
[    1.886329] 0x000000800000-0x000001c00000 : "root"
[    1.909674] 0x000001c00000-0x000001e00000 : "config"
[    1.918057] 0x000001e00000-0x000002000000 : "sig"
[    1.926190] 0x000002000000-0x000008000000 : "nvdata"
[    2.013896] OneNAND driver initializing
[    2.020351] mousedev: PS/2 mouse device common for all mice
[    2.028033] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    2.035516] 44e3e000.rtc: already running
[    2.040023] i2c /dev entries driver
[    2.044334] pps_ldisc: PPS line discipline registered
[    2.049820] Driver for 1-wire Dallas network protocol.
[    2.057074] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    2.064655] cpuidle: using governor ladder
[    2.068996] cpuidle: using governor menu
[    2.073572] of_get_named_gpio_flags exited with status 6
[    2.073591] of_get_named_gpio_flags: can't parse gpios property
[    2.073606] of_get_named_gpio_flags: can't parse gpios property
[    2.073639] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    2.080866] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    2.087672] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    2.094893] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    2.102247] mmc.4 supply vmmc_aux not found, using dummy regulator
[    2.109177] omap_hsmmc mmc.4: pins are not configured from the driver
[    2.143806] of_get_named_gpio_flags exited with status -517
[    2.143873] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.151676] ledtrig-cpu: registered to indicate activity on CPUs
[    2.158453] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    2.165649] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    2.173707] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    2.179987] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    2.187172] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    2.195485] nf_conntrack version 0.5.0 (3935 buckets, 15740 max)
[    2.202962] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.208746] TCP: cubic registered
[    2.212287] Initializing XFRM netlink socket
[    2.216921] NET: Registered protocol family 10
[    2.223018] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.228964] NET: Registered protocol family 17
[    2.233734] NET: Registered protocol family 15
[    2.238558] Key type dns_resolver registered
[    2.243136] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    2.251212] ThumbEE CPU extension supported.
[    2.255727] Registering SWP/SWPB emulation handler
[    2.261840] registered taskstats version 1
[    2.267623] of_get_named_gpio_flags exited with status -517
[    2.267693] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.324911] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.331324] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    2.346132] libphy: 4a101000.mdio: probed
[    2.350481] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    2.360567] of_get_named_gpio_flags exited with status -517
[    2.360632] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    2.368118] Detected MACID = c4:f3:12:00:34:65
[    2.372802] cpsw 4a100000.ethernet: NAPI disabled
[    2.379786] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.388967] cpu0 supply cpu0 not found, using dummy regulator
[    2.395458] cpufreq_cpu0: failed to scale voltage up: -22
[    2.401282] cpufreq_cpu0: failed to scale voltage up: -22
[    2.414993] Freeing init memory: 196K
[    2.495937] devpts: called with bogus options
[    2.959041] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.809597] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    6.258066] net eth0: initializing cpsw version 1.12 (0)
[    6.266335] net eth0: phy found : id is : 0x7c0f1
[    6.279885] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.145207] omap_elm_correct_data(1295)
[    8.149368] omap_elm_correct_data(1298)
[   10.415241] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   10.421664] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.932167] register uart_trans chrdev success.
[   11.937653] tty port open success [/dev/ttyO1]!
[   11.949331] init sucess for tty struct (249:1)  [/dev/ttyO1]
[   11.956078] tty port open success [/dev/ttyO2]!
[   11.964374] init sucess for tty struct (249:2)  [/dev/ttyO2]
[   11.971870] tty port open success [/dev/ttyO4]!
[   11.978163] init sucess for tty struct (249:4)  [/dev/ttyO4]
[   11.986376] tty port open success [/dev/ttyO5]!
[   12.001265] init sucess for tty struct (249:5)  [/dev/ttyO5]
[   36.277153] uart trans dev open.
[   36.280879] uart_buf virt addr = 0xccf40000
[   36.285446] uart_buf phys addr = 0x8cf40000
[   36.289978] uart_buf pfn       = 0x0008cf40
[   36.557893] uart trans stop send work timer.
[   36.563989] uart trans set chain exist bits:0x7.
[   36.569020] uart trans set work queue count 768.
[   38.514105] omap_elm_correct_data(1295)
[   38.518283] omap_elm_correct_data(1298)
[  147.007801] uart set baud to: 4098
[  147.013674] uart set baud to: 4098
[  147.017640] uart set baud to: 4098
[  148.968381] omap_elm_correct_data(1295)
[  148.972569] omap_elm_correct_data(1298)
[  209.165893] uart set baud to: 4109
[  209.236436] uart set baud to: 4109
[  272.894962] uart trans start send work timer.
[ 2137.654822] omap_elm_correct_data(1295)
[ 2137.659047] omap_elm_correct_data(1298)


===========================================Miner log===========================================
2000-01-01 00:00:12 Open miner sn file /config/sn error
2000-01-01 00:00:12 Miner compile time: Mon Dec 26 17:19:30 CST 2022 type: Antminer BHB42XXX sn :
2000-01-01 00:00:13 This is fix-freq version
2000-01-01 00:00:13 Miner compile time: Mon Dec 26 17:19:30 CST 2022 type: Antminer BHB42XXX
2000-01-01 00:00:13 commit version: f2ab6bc 2022-12-26 17:08:34, build by: jenkins 2022-12-26 17:32:52
2000-01-01 00:00:14 opt_multi_version     = 1
2000-01-01 00:00:14 opt_bitmain_ab        = 1
2000-01-01 00:00:14 mid_auto_gen          = 1
2000-01-01 00:00:14 opt_bitmain_work_mode = 0
2000-01-01 00:00:14 port 51 already exported
2000-01-01 00:00:14 port 49 already exported
2000-01-01 00:00:15 port 48 already exported
2000-01-01 00:00:15 port 60 already exported
2000-01-01 00:00:15 port 47 already exported
2000-01-01 00:00:15 port 27 already exported
2000-01-01 00:00:15 port 44 already exported
2000-01-01 00:00:15 port 22 already exported
2000-01-01 00:00:16 no board pluged in socket 44
2000-01-01 00:00:16 port 23 already exported
2000-01-01 00:00:16 port 45 already exported
2000-01-01 00:00:16 port 46 already exported
2000-01-01 00:00:16 port 26 already exported
2000-01-01 00:00:16 Note: front fan is power on!
2000-01-01 00:00:16 Note: rear fan is power on!
2000-01-01 00:00:16 start the http log.
2000-01-01 00:00:16 httpListenThread start ret=0
2000-01-01 00:00:16 start listen on 6060 ...
2024-10-27 13:40:30 ==========================capability start==========================
2024-10-27 13:40:30 board num = 3
2024-10-27 13:40:30 board id = 0, chain num = 1
2024-10-27 13:40:30    chain id = 0
2024-10-27 13:40:30 board id = 1, chain num = 1
2024-10-27 13:40:30    chain id = 1
2024-10-27 13:40:30 board id = 2, chain num = 1
2024-10-27 13:40:30    chain id = 2
2024-10-27 13:40:30 ==========================capability end============================
2024-10-27 13:40:30 chain num = 3
2024-10-27 13:40:30 skip loading levels for now
2024-10-27 13:40:31 load chain 0 eeprom data
2024-10-27 13:40:32 load chain 1 eeprom data
2024-10-27 13:40:33 load chain 2 eeprom data
2024-10-27 13:40:33 i2c_sim_init start
2024-10-27 13:40:33 i2c_sim_init end
2024-10-27 13:40:35 power open power_version = 0x71
2024-10-27 13:40:39 power is not Calibrated
2024-10-27 13:40:41 miner type: Antminer S19j Pro
2024-10-27 13:40:41 multi machine mode
2024-10-27 13:40:41 load machine BHB42601 conf
2024-10-27 13:40:41 machine : BHB42601
2024-10-27 13:40:41 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2024-10-27 13:40:41 abandon mix board!
2024-10-27 13:40:41 abandon mix board!
2024-10-27 13:40:41 fan_eft : 0  fan_pwm : 100
2024-10-27 13:40:41 create thread get_nonce_and_register_thread
2024-10-27 13:40:41 fixed working voltage = 1320
2024-10-27 13:40:41 fixed frequency is 525
2024-10-27 13:40:42 Chain

• PCB Version: 0x0110

2024-10-27 13:40:42 Chain

• BOM Version: 0x0020

2024-10-27 13:40:42 Chain [1] PCB Version: 0x0110
2024-10-27 13:40:42 Chain [1] BOM Version: 0x0020
2024-10-27 13:40:42 Chain [2] PCB Version: 0x0110
2024-10-27 13:40:43 Chain [2] BOM Version: 0x0020
2024-10-27 13:40:43 Fan check passed.
2024-10-27 13:40:43 uart_trans addr:0xb42df000.
2024-10-27 13:40:44 chain[0] PIC jump to app
2024-10-27 13:40:45 Check chain[0] PIC fw version=0x89
2024-10-27 13:40:46 chain[1] PIC jump to app
2024-10-27 13:40:48 Check chain[1] PIC fw version=0x89
2024-10-27 13:40:50 chain[2] PIC jump to app
2024-10-27 13:40:51 Check chain[2] PIC fw version=0x89
2024-10-27 13:40:52 create thread pic_heart_beat_thread
2024-10-27 13:40:52 max sensor num = 4
2024-10-27 13:40:52 STATUS_INITED: soc init done!
2024-10-27 13:40:52 temperature_monitor_thread start...
2024-10-27 13:40:55 start to init...
2024-10-27 13:41:01 warning:power is not calibration.
2024-10-27 13:41:02 power type version: 0x0071
2024-10-27 13:41:02 Initializing the power, please wait, this may take up to 2 minutes...
2024-10-27 13:42:29 Slept 80 seconds, diff = 3.
2024-10-27 13:42:29 set_voltage_by_steps to 1500.
2024-10-27 13:42:32 chain avg vol rise to 14.78
2024-10-27 13:42:33 start up min temp by 75a = 14
2024-10-27 13:42:43 Chain[0]: find 126 asic, times 0
2024-10-27 13:42:52 !!! reg crc error
2024-10-27 13:42:53 Chain[1]: find 111 asic, times 0
2024-10-27 13:43:03 !!! reg crc error
2024-10-27 13:43:05 Chain[1]: find 112 asic, times 1
2024-10-27 13:43:16 Chain[1]: find 113 asic, times 2
2024-10-27 13:43:17 Chain 1 only find 113 asic, will power off hash board 1
2024-10-27 13:43:18 chain avg vol rise to 22.12
2024-10-27 13:43:18 chain avg vol drop to 14.77
2024-10-27 13:43:28 Chain[2]: find 126 asic, times 0
2024-10-27 13:43:33 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2024-10-27 13:43:36 Bring up temperature is 15
2024-10-27 13:43:36 set UART baud to 3000000
2024-10-27 13:43:36 create thread check_miner_status_thread
2024-10-27 13:43:36 create thread check_system_work_thread
2024-10-27 13:43:36 set_voltage_by_steps to 1450.
2024-10-27 13:43:38 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2024-10-27 13:43:38 start do_core_reset
2024-10-27 13:43:51 end do_core_reset
2024-10-27 13:43:51 chain[0] min = 525 max =525
2024-10-27 13:43:51 chain[2] min = 525 max =525
2024-10-27 13:43:51 1.inc all chain freq to 525
2024-10-27 13:43:51 fixed step freq_start = 50, freq_end = 525, freq_step = 6.25
2024-10-27 13:43:51 chain = 0 set freq to 56.25
2024-10-27 13:43:51 chain = 2 set freq to 56.25
2024-10-27 13:43:52 chain = 0 set freq to 62.50
2024-10-27 13:43:52 chain = 2 set freq to 62.50
2024-10-27 13:43:52 chain = 0 set freq to 68.75
2024-10-27 13:43:52 chain = 2 set freq to 68.75
2024-10-27 13:43:52 chain = 0 set freq to 75.00
2024-10-27 13:43:52 chain = 2 set freq to 75.00
2024-10-27 13:43:53 chain = 0 set freq to 81.25
2024-10-27 13:43:53 chain = 2 set freq to 81.25
2024-10-27 13:43:53 chain = 0 set freq to 87.50
2024-10-27 13:43:53 chain = 2 set freq to 87.50
2024-10-27 13:43:53 chain = 0 set freq to 93.75
2024-10-27 13:43:53 chain = 2 set freq to 93.75
2024-10-27 13:43:53 chain = 0 set freq to 100.00
2024-10-27 13:43:53 chain = 2 set freq to 100.00
2024-10-27 13:43:54 chain = 0 set freq to 106.25
2024-10-27 13:43:54 chain = 2 set freq to 106.25
2024-10-27 13:43:54 chain = 0 set freq to 112.50
2024-10-27 13:43:54 chain = 2 set freq to 112.50
2024-10-27 13:43:54 chain = 0 set freq to 118.75
2024-10-27 13:43:54 chain = 2 set freq to 118.75
2024-10-27 13:43:55 chain = 0 set freq to 125.00
2024-10-27 13:43:55 chain = 2 set freq to 125.00
2024-10-27 13:43:55 chain = 0 set freq to 131.25
2024-10-27 13:43:55 chain = 2 set freq to 131.25
2024-10-27 13:43:55 chain = 0 set freq to 137.50
2024-10-27 13:43:55 chain = 2 set freq to 137.50
2024-10-27 13:43:56 chain = 0 set freq to 143.75
2024-10-27 13:43:56 chain = 2 set freq to 143.75
2024-10-27 13:43:56 chain = 0 set freq to 150.00
2024-10-27 13:43:56 chain = 2 set freq to 150.00
2024-10-27 13:43:56 chain = 0 set freq to 156.25
2024-10-27 13:43:56 chain = 2 set freq to 156.25
2024-10-27 13:43:56 chain = 0 set freq to 162.50
2024-10-27 13:43:56 chain = 2 set freq to 162.50
2024-10-27 13:43:57 chain = 0 set freq to 168.75
2024-10-27 13:43:57 chain = 2 set freq to 168.75
2024-10-27 13:43:57 chain = 0 set freq to 175.00
2024-10-27 13:43:57 chain = 2 set freq to 175.00
2024-10-27 13:43:57 chain = 0 set freq to 181.25
2024-10-27 13:43:57 chain = 2 set freq to 181.25
2024-10-27 13:43:58 chain = 0 set freq to 187.50
2024-10-27 13:43:58 chain = 2 set freq to 187.50
2024-10-27 13:43:58 chain = 0 set freq to 193.75
2024-10-27 13:43:58 chain = 2 set freq to 193.75
2024-10-27 13:43:58 chain = 0 set freq to 200.00
2024-10-27 13:43:58 chain = 2 set freq to 200.00
2024-10-27 13:43:59 chain = 0 set freq to 206.25
2024-10-27 13:43:59 chain = 2 set freq to 206.25
2024-10-27 13:43:59 chain = 0 set freq to 212.50
2024-10-27 13:43:59 chain = 2 set freq to 212.50
2024-10-27 13:43:59 chain = 0 set freq to 218.75
2024-10-27 13:43:59 chain = 2 set freq to 218.75
2024-10-27 13:44:00 chain = 0 set freq to 225.00
2024-10-27 13:44:00 chain = 2 set freq to 225.00
2024-10-27 13:44:00 chain = 0 set freq to 231.25
2024-10-27 13:44:00 chain = 2 set freq to 231.25
2024-10-27 13:44:00 chain = 0 set freq to 237.50
2024-10-27 13:44:00 chain = 2 set freq to 237.50
2024-10-27 13:44:00 chain = 0 set freq to 243.75
2024-10-27 13:44:00 chain = 2 set freq to 243.75
2024-10-27 13:44:01 chain = 0 set freq to 250.00
2024-10-27 13:44:01 chain = 2 set freq to 250.00
2024-10-27 13:44:01 chain = 0 set freq to 256.25
2024-10-27 13:44:01 chain = 2 set freq to 256.25
2024-10-27 13:44:01 chain = 0 set freq to 262.50
2024-10-27 13:44:01 chain = 2 set freq to 262.50
2024-10-27 13:44:02 chain = 0 set freq to 268.75
2024-10-27 13:44:02 chain = 2 set freq to 268.75
2024-10-27 13:44:02 chain = 0 set freq to 275.00
2024-10-27 13:44:02 chain = 2 set freq to 275.00
2024-10-27 13:44:02 chain = 0 set freq to 281.25
2024-10-27 13:44:02 chain = 2 set freq to 281.25
2024-10-27 13:44:03 chain = 0 set freq to 287.50
2024-10-27 13:44:03 chain = 2 set freq to 287.50
2024-10-27 13:44:03 chain = 0 set freq to 293.75
2024-10-27 13:44:03 chain = 2 set freq to 293.75
2024-10-27 13:44:03 chain = 0 set freq to 300.00
2024-10-27 13:44:03 chain = 2 set freq to 300.00
2024-10-27 13:44:04 chain = 0 set freq to 306.25
2024-10-27 13:44:04 chain = 2 set freq to 306.25
2024-10-27 13:44:04 chain = 0 set freq to 312.50
2024-10-27 13:44:04 chain = 2 set freq to 312.50
2024-10-27 13:44:04 chain = 0 set freq to 318.75
2024-10-27 13:44:04 chain = 2 set freq to 318.75
2024-10-27 13:44:04 chain = 0 set freq to 325.00
2024-10-27 13:44:04 chain = 2 set freq to 325.00
2024-10-27 13:44:05 chain = 0 set freq to 331.25
2024-10-27 13:44:05 chain = 2 set freq to 331.25
2024-10-27 13:44:05 chain = 0 set freq to 337.50
2024-10-27 13:44:05 chain = 2 set freq to 337.50
2024-10-27 13:44:05 chain = 0 set freq to 343.75
2024-10-27 13:44:05 chain = 2 set freq to 343.75
2024-10-27 13:44:06 chain = 0 set freq to 350.00
2024-10-27 13:44:06 chain = 2 set freq to 350.00
2024-10-27 13:44:06 chain = 0 set freq to 356.25
2024-10-27 13:44:06 chain = 2 set freq to 356.25
2024-10-27 13:44:06 chain = 0 set freq to 362.50
2024-10-27 13:44:06 chain = 2 set freq to 362.50
2024-10-27 13:44:07 chain = 0 set freq to 368.75
2024-10-27 13:44:07 chain = 2 set freq to 368.75
2024-10-27 13:44:07 chain = 0 set freq to 375.00
2024-10-27 13:44:07 chain = 2 set freq to 375.00
2024-10-27 13:44:07 chain = 0 set freq to 381.25
2024-10-27 13:44:07 chain = 2 set freq to 381.25
2024-10-27 13:44:07 chain = 0 set freq to 387.50
2024-10-27 13:44:07 chain = 2 set freq to 387.50
2024-10-27 13:44:08 chain = 0 set freq to 393.75
2024-10-27 13:44:08 chain = 2 set freq to 393.75
2024-10-27 13:44:08 chain = 0 set freq to 400.00
2024-10-27 13:44:08 chain = 2 set freq to 400.00
2024-10-27 13:44:08 chain = 0 set freq to 406.25
2024-10-27 13:44:08 chain = 2 set freq to 406.25
2024-10-27 13:44:09 chain = 0 set freq to 412.50
2024-10-27 13:44:09 chain = 2 set freq to 412.50
2024-10-27 13:44:09 chain = 0 set freq to 418.75
2024-10-27 13:44:09 chain = 2 set freq to 418.75
2024-10-27 13:44:09 chain = 0 set freq to 425.00
2024-10-27 13:44:09 chain = 2 set freq to 425.00
2024-10-27 13:44:10 chain = 0 set freq to 431.25
2024-10-27 13:44:10 chain = 2 set freq to 431.25
2024-10-27 13:44:10 chain = 0 set freq to 437.50
2024-10-27 13:44:10 chain = 2 set freq to 437.50
2024-10-27 13:44:10 chain = 0 set freq to 443.75
2024-10-27 13:44:10 chain = 2 set freq to 443.75
2024-10-27 13:44:11 chain = 0 set freq to 450.00
2024-10-27 13:44:11 chain = 2 set freq to 450.00
2024-10-27 13:44:11 chain = 0 set freq to 456.25
2024-10-27 13:44:11 chain = 2 set freq to 456.25
2024-10-27 13:44:11 chain = 0 set freq to 462.50
2024-10-27 13:44:11 chain = 2 set freq to 462.50
2024-10-27 13:44:11 chain = 0 set freq to 468.75
2024-10-27 13:44:11 chain = 2 set freq to 468.75
2024-10-27 13:44:12 chain = 0 set freq to 475.00
2024-10-27 13:44:12 chain = 2 set freq to 475.00
2024-10-27 13:44:12 chain = 0 set freq to 481.25
2024-10-27 13:44:12 chain = 2 set freq to 481.25
2024-10-27 13:44:12 chain = 0 set freq to 487.50
2024-10-27 13:44:12 chain = 2 set freq to 487.50
2024-10-27 13:44:13 chain = 0 set freq to 493.75
2024-10-27 13:44:13 chain = 2 set freq to 493.75
2024-10-27 13:44:13 chain = 0 set freq to 500.00
2024-10-27 13:44:13 chain = 2 set freq to 500.00
2024-10-27 13:44:13 chain = 0 set freq to 506.25
2024-10-27 13:44:13 chain = 2 set freq to 506.25
2024-10-27 13:44:14 chain = 0 set freq to 512.50
2024-10-27 13:44:14 chain = 2 set freq to 512.50
2024-10-27 13:44:14 chain = 0 set freq to 518.75
2024-10-27 13:44:14 chain = 2 set freq to 518.75
2024-10-27 13:44:14 chain = 0 set freq to 525.00
2024-10-27 13:44:14 chain = 2 set freq to 525.00
2024-10-27 13:44:15 enter mixed freq cfg
2024-10-27 13:44:15 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2024-10-27 13:44:15 start do_core_reset
2024-10-27 13:44:27 end do_core_reset
2024-10-27 13:44:37 set_voltage_by_steps to 1336.
2024-10-27 13:44:39 Init done!
2024-10-27 13:44:39 STATUS_OKAY
2024-10-27 13:44:39 start the cached job
2024-10-27 13:44:39 Version num 65536
2024-10-27 13:44:39 Mask num 0x1fffe000
2024-10-27 13:44:39 opt_multi_version = 65536, interval timeout = 2945120
2024-10-27 13:44:39 freq = 525, percent = 90, hcn = 4993, timeout = 2945120
2024-10-27 13:44:39 set_start_time_point total_tv_start_sys=273 total_tv_end_sys=274
2024-10-27 13:44:39 set_voltage_by_steps to 1350.
2024-10-27 13:45:34 set_voltage_by_steps to 1340.
2024-10-27 13:46:51 set_voltage_by_steps to 1330.
2024-10-27 14:10:30 set_voltage_by_steps to 1340.
2024-10-27 14:13:52 30m avg rate is 68050.55 in 29 mins
2024-10-27 14:15:03 set_voltage_by_steps to 1330.

It is this zeus one: https://www.zeusbtc.com/ASIC-Miner-Repair/Parts-Tools-Details.asp?ID=1467

Hey everyone,

I bought a refurbished touchscreen test fixture to work on S17+ hashboards. It did not come with an SD card containing the conversion files or test files.

I didnt think this was a big deal, thinking I could just download the files of the internet somewhere and put them on an SD card of my own. But after hours and hours of looking and combing through the internet, I cannot find anything at all.

Does anyone on here have a source or link to these files so I can just load them on myself and get to work? Bitmain is taking a long time to reply and im starting to get annoyed being held up by something so simple.

Thanks!

I did an analysis for a small 250kw unit, price of generator at $70,000 CAD ($50,000 USD) with an average price of gas at roughly $2750 CAD/Month ($2000 USD) with that generators gas consumption, 85% up time, and thats at 65% of the 5-year average nataural gas price.

Thats interesting, the analysis that I have done for it is still profitable. Even taking maintenance on the generator into consideration.

Can you go deeper into why you do not think its profitable anymore?

Specifically, if you bought a 480v gen, you would buy a transformer? maybe go to 415Y/240 and balance the load onto 240V?

Hey there,

Ive heard of these setups in North Dakota and Alberta, Canada where a mining farm will be built to run off of excess natural gas on a well-site.

Is there anyone here who owns one or has operated or built one? I am mostly curious about how different setups have done power distribution and all the electrical components from a gas generator.

As far as I see it you would need a big transformer to get the higher generator voltages down, then a large breaker panel to supply PDU's, or your own sub panels.

Id love to hear about this from someone who has done it before.

I do not think that a 51% attack is likely because the pools are incentivized to keep the value of bitcoin high for their business. An attack on the network would plummet the value of Bitcoin. If this was the intent of a government entity, they would have to coordinate with other governments to also take control of large pools within their jurisdictions.

What I do see as a problem is the ability to censor transactions, or prioritize transactions by building the coming block in specific ways. This is an opaque process that does not have any accountability, and not really any consequence. There is also high chances that government entities have such transactions in mind they would like prioritized or censored.

Ocean pool is looking to solve this, I think they will be successful.

What is happening is that I am getting 0 chips detected on a hashboard, so I am swap that one out with different hashboards until one is recognized.

I assumed this was because the voltages were different, but maybe it is because those hashboards are broken, and when one works its not becauses its compatible but because I found a good one?

Update:

I bought them, yes because they were dirt cheap, and because I have connections with the seller rendering them trustworthy.

I have been installing BraiinsOS+ on them as I'm going through them and this does not solve the hashboard compatability, I'm having to randomly guess until I find one that works.

It seems that the BraiinsOS+ kernal log is different from stock bitmain? I dont see anything about hashboard voltages in there.

What I think I am going to do to streamline the process is: keep one stock bitmain firmware, and as you said, use that to individually plug in all my loose hashboards and label them with their voltages.

Mining is a profitable business if you can find a competitive advantage for cost savings, or multiple income streams.
Most commonly this is done by getting good and creative electricity deals, research: Stranded Gas Mining
Dual income can come from selling the heat created by the miner for specific situations, some of this is done in the marijuana growing business.

Did you ever get this sorted? I'm in a similar situation, looking to go the simple route of just flashing Braiins OS+ onto them.

Curious how all yours turned out and what you had to do.

Hello,

I am trying to find a way to flash BraiinsOS+ onto S17+ without leaving micro-sd in, to avoid having to spend $300+ on many micro-sd's.

I have read little bits about flashing with BOS+Toolbox, and something about flashing to NAND. But I get lost as im not too technically knowlegable.

If someone could give step by step instructions, or a link for how to, that would be great. Thanks.

Hello,

I am purchasing over 100 S17+'s, over half of which are broken and do not work. The seller claims that many could be fixed by simply swapping the hashboards around to build complete ones.

I have read that the S17's hashboards have specific voltages which are incompatible in different combinations of other hashboards. Im wondering if you guys could shed some light on the specifics of this, and what i would need to read these voltages and match properly. Or if there is a way to by-pass this, or change it in the computer. Im prepared to buy some tools or whatever i may need.

I have also heard that if you use a third-party firmware (im considering Braiins) this specific problem does not apply, and you can use any 3 hashboards together.

Any information relevant to these hashboard voltages, s17+ repair, or suggestions on how to undertake this job of going through 100+ s17's and 300+ hashboards is very welcome.

Thanks.

Hello everyone,

Im currently building a stranded gas mining rig in a seacan to be deployed on a stranded gas well in Alberta. I come from more of the oilfield and macro-economics side of this project, and know very little about the tech side. Im looking for any advice and help I can get my hands on.

Ive been researching a little bit about how to setup my network to provide me with remote access, and be as basic as possible. It seems to be cut-dry and simple but I know that it is more complex than I think so I am looking for some guidance.

My current view of is would be this: 50 ASICS plugged into 96 port switch, The switch plugged into a miraki firewall, the firewall plugged into a modem. From what I understand, I can remotely log into the network through the firewall.

Do I need a computer to stay out on location in the rig in this network and where would this fit into the network?
Would it be complicating to build a small security camera system into this?
What kind of switch should I be looking for that is robust and simple?
What kind of firewall should I be looking for that offers remote access but is cost effective?
How should I setup my remote accessing, and how much control will I really have/what will it look like?



If anyone has any advice, thoughts, or comments about this. Please share.

Thanks.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0
• 1

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000294] ps7-ttc #0 at df804000, irq=43
[    0.000592] Console: colour dummy device 80x30
[    0.000622] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090244] pid_max: default: 32768 minimum: 301
[    0.090455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090474] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092645] CPU: Testing write buffer coherency: ok
[    0.092960] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093017] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.093237] L310 cache controller enabled
[    0.093256] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170987] CPU1: Booted secondary processor
[    0.260221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260349] Brought up 2 CPUs
[    0.260368] SMP: Total of 2 processors activated.
[    0.260377] CPU: All CPU(s) started in SVC mode.
[    0.261036] devtmpfs: initialized
[    0.263483] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264671] regulator-dummy: no parameters
[    0.272058] NET: Registered protocol family 16
[    0.274342] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276615] cpuidle: using governor ladder
[    0.276628] cpuidle: using governor menu
[    0.283999] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285522] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285535] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285643] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.308005] bio: create slab <bio-0> at 0
[    0.309401] vgaarb: loaded
[    0.310097] SCSI subsystem initialized
[    0.311502] usbcore: registered new interface driver usbfs
[    0.311688] usbcore: registered new interface driver hub
[    0.311916] usbcore: registered new device driver usb
[    0.312441] media: Linux media interface: v0.10
[    0.312598] Linux video capture interface: v2.00
[    0.312839] pps_core: LinuxPPS API ver. 1 registered
[    0.312850] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312972] PTP clock support registered
[    0.313323] EDAC MC: Ver: 3.0.0
[    0.314381] Advanced Linux Sound Architecture Driver Initialized.
[    0.317110] DMA-API: preallocated 4096 debug entries
[    0.317123] DMA-API: debugging enabled by kernel config
[    0.317191] Switched to clocksource arm_global_timer
[    0.337811] NET: Registered protocol family 2
[    0.338456] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.338513] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.338598] TCP: Hash tables configured (established 4096 bind 4096)
[    0.338642] TCP: reno registered
[    0.338659] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.338689] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338925] NET: Registered protocol family 1
[    0.339248] RPC: Registered named UNIX socket transport module.
[    0.339260] RPC: Registered udp transport module.
[    0.339268] RPC: Registered tcp transport module.
[    0.339276] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.339288] PCI: CLS 0 bytes, default 64
[    0.339711] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.341682] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.343712] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343911] msgmni has been set to 967
[    0.344672] io scheduler noop registered
[    0.344684] io scheduler deadline registered
[    0.344724] io scheduler cfq registered (default)
[    0.356625] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.356645] dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.480235] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.048202] console [ttyPS0] enabled
[    1.052470] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.060100] [drm] Initialized drm 1.1.0 20060810
[    1.077074] brd: module loaded
[    1.086449] loop: module loaded
[    1.095855] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.101669] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.109570] libphy: XEMACPS mii bus: probed
[    1.113936] ------------- phy_id = 0x3625e62
[    1.118956] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.127774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.134389] ehci-pci: EHCI PCI platform driver
[    1.141687] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.148547] usbcore: registered new interface driver usb-storage
[    1.155368] mousedev: PS/2 mouse device common for all mice
[    1.161478] i2c /dev entries driver
[    1.168413] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.173887] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.179801] Xilinx Zynq CpuIdle Driver started
[    1.184640] sdhci: Secure Digital Host Controller Interface driver
[    1.190841] sdhci: Copyright(c) Pierre Ossman
[    1.195112] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.201931] mmc0: no vqmmc regulator found
[    1.205947] mmc0: no vmmc regulator found
[    1.247213] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255905] usbcore: registered new interface driver usbhid
[    1.261418] usbhid: USB HID core driver
[    1.266122] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.272419] nand: Micron MT29F2G08ABAEAWP
[    1.276385] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.282324] Bad block table found at page 131008, version 0x01
[    1.288544] Bad block table found at page 130944, version 0x01
[    1.294593] 3 ofpart partitions found on MTD device pl353-nand
[    1.300376] Creating 3 MTD partitions on "pl353-nand":
[    1.305467] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.313495] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320807] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.329541] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.336070] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.341393] TCP: cubic registered
[    1.344627] NET: Registered protocol family 17
[    1.349351] Registering SWP/SWPB emulation handler
[    1.355243] regulator-dummy: disabling
[    1.359622] UBI: attaching mtd1 to ubi0
[    1.747705] UBI: scanning is finished
[    1.759513] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.766571] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.773366] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.780043] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.786881] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.792890] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.800001] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 768485946
[    1.808945] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.818162] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.818167] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.822124] ALSA device list:
[    1.822127]   No soundcards found.
[    1.838937] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.983843] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.989795] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.998900] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.008788] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.013820] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[    2.119945] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.189000] devtmpfs: mounted
[    2.192112] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    3.207980] random: dd urandom read with 0 bits of entropy available
[    3.827212]
[    3.827212] bcm54xx_config_init
[    4.897242]
[    4.897242] bcm54xx_config_init
[   10.898064] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   10.904165] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   23.438401] In axi fpga driver!
[   23.441470] request_mem_region OK!
[   23.444861] AXI fpga dev virtual address is 0xdf9fc000
[   23.449995] *base_vir_addr = 0xc51e
[   23.465355] In fpga mem driver!
[   23.468482] request_mem_region OK!
[   23.471987] fpga mem virtual address is 0xe2000000
[   24.227244]
[   24.227244] bcm54xx_config_init
[   25.307231]
[   25.307231] bcm54xx_config_init
[   29.308054] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   29.314156] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f5a000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d53000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8122ed0415408814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[44] has core num=4
main.c:9113: Chain[5] ASIC[50] has core num=4
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[43] has core num=2
main.c:9113: Chain[6] ASIC[47] has core num=1
main.c:9113: Chain[6] ASIC[49] has core num=13
main.c:9113: Chain[6] ASIC[50] has core num=2
main.c:9113: Chain[6] ASIC[62] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[14] has core num=11
main.c:9113: Chain[7] ASIC[19] has core num=1
main.c:9113: Chain[7] ASIC[42] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=91 on chain[5], value=890
main.c:9183: get PIC voltage=91 on chain[6], value=890
main.c:9183: get PIC voltage=91 on chain[7], value=890
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,37,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found=20371 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 8122ed0415408814
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5640
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5640
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5640
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=91 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=91 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=91 value=890
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=890
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J8] has 63 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[44] has core num=4
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[50] has core num=4
driver-btm-c5.c:4543:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J7] ASIC[43] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J7] ASIC[47] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J7] ASIC[49] has core num=13
driver-btm-c5.c:4553:set_frequency: Chain[J7] ASIC[50] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J7] ASIC[62] has core num=2
driver-btm-c5.c:4543:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[14] has core num=11
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[19] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[42] has core num=1
driver-btm-c5.c:4583:set_frequency: miner total rate=13569GH/s ideal_total_hash_rate = 13500GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=631
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=631

driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4610:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
driver-btm-c5.c:4821:set_frequency: Chain:6 max freq=631
driver-btm-c5.c:4822:set_frequency: Chain:6 min freq=631

driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4610:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:7 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
driver-btm-c5.c:4821:set_frequency: Chain:7 max freq=631
driver-btm-c5.c:4822:set_frequency: Chain:7 min freq=631


driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4250:ProcessFixFreqForChips: totalRate = 13569, fixed_totalRate = 13635
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=631
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=631

driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4867:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:6 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
driver-btm-c5.c:5122:set_frequency: Chain:6 max freq=631
driver-btm-c5.c:5123:set_frequency: Chain:6 min freq=631

driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4867:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:7 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
driver-btm-c5.c:5122:set_frequency: Chain:7 max freq=631
driver-btm-c5.c:5123:set_frequency: Chain:7 min freq=631

driver-btm-c5.c:5131:set_frequency: max freq = 631
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 13569, fixed_totalRate = 13500
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:35 remote:36 offset:30
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=30 typeID=55
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,37,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:33 remote:35 offset:28
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:33 remote:36 offset:27
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:13724:bitmain_c5_init: single board rate=4526 voltage limit=940 on chain[5]
driver-btm-c5.c:13761:bitmain_c5_init: get PIC voltage=890 on chain[5], check: must be < 940
driver-btm-c5.c:13724:bitmain_c5_init: single board rate=4519 voltage limit=940 on chain[6]
driver-btm-c5.c:13761:bitmain_c5_init: get PIC voltage=890 on chain[6], check: must be < 940
driver-btm-c5.c:13724:bitmain_c5_init: single board rate=4523 voltage limit=940 on chain[7]
driver-btm-c5.c:13761:bitmain_c5_init: get PIC voltage=890 on chain[7], check: must be < 940
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=261 total_tv_end_sys=262
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 45
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=249.980 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=236.458 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=234.344 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=221.677 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=234.344 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=0.00000
Asic[41]=0.00000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=0.00000 Asic[55]=0.00000 Asic[56]=0.00000
Asic[57]=207.819 Asic[58]=0.00000 Asic[59]=0.00000 Asic[60]=0.00000 Asic[61]=0.00000 Asic[62]=0.00000 Asic[63]=0.00000
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=249.980000
Asic[57]=236.458000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=234.344000
Asic[57]=221.677000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[29]=234.344000
Asic[57]=207.819000
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=45
Chain[5] Chip[62] junction temperature=60
Special fix Chain[5] Chip[62] middle Temp = 60
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=43
Chain[6] Chip[62] junction temperature=55
Special fix Chain[6] Chip[62] middle Temp = 58
Done read temp on Chain[6]
Chain[7] Chip[244] pcb temperature=42
Chain[7] Chip[62] junction temperature=55
Special fix Chain[7] Chip[62] middle Temp = 57
Done read temp on Chain[7]
Max pcb temp : 45
set FAN speed according to: temp_highest=45 temp_top1[PWM_T]=45 temp_top1[TEMP_POS_LOCAL]=45 temp_change=45 fix_fan_steps=0
set normal FAN speed...
pwm_percent = 40
FAN PWM: 40
read_temp_func Done!
CRC error counter=0

I just bought a used S9,



it seems to have some problems:

- When it starts up after about 30 seconds the red light turns on and stays solid (doesnt blink and green light stays off)

- I can find the IP and log into the thing but when I put my slushpool info in, it never loads or shows on slushpool

- I have re-booted, re-started, and flashed the firmware multiple times. When i do sometimes the IP doesnt show back up and i have to unplug and plug back in, and sometimes the IP shows up but the Antminer OS is all glitchy and doesnt load half the info and pages.



If you have any ideas for me to try let me know!